We spent many hours on research to finding amplifier jl audio 500/1, reading product features, product specifications for this guide. For those of you who wish to the best amplifier jl audio 500/1, you should not miss this article. amplifier jl audio 500/1 coming in a variety of types but also different price range. The following is the top 10 amplifier jl audio 500/1 by our suggestions:
Best amplifier jl audio 500/1
1. JL Audio JX1000/1D 1000 Watt RMS Monoblock Class D Car Amplifier
Feature
JX Series Monoblock Amplifier 500 rms @ 4ohms 750 rms @ 3ohms and 1000 rms @ 2ohmsUnregulated PWM switching type power supply
Variable Bass Boost (0 to +12 dB bass boost centered at 45 Hz)
Soft start turn-on prevent clicking and popping when system turns on
Dimensions: 11"L x 7-3/4"W x 2"H
Description
JL Audio JX1000/1D 1000 Watt RMS Monoblock Class D Car Amplifier OPEN BOX2. JL Audio Class-D Monoblock RD500/1 1000W Peak RD Series 2-Ohm Stable Class-D Monoblock Subwoofer Amplifier
Feature
RD500/1 - JL Audio Monoblock 500W RMS Amplifier250 watts RMS x 1 at 4 ohms (500 watts RMS x 1 at 2 ohms)
Class D amplifier design with NextDTM switching amp technology
Differential-balanced inputs help eliminate noise
Dimensions: 9-13/16"W x 2-3/16"H x 7"D
3. JL Audio JX1000/1D 1000 Watt RMS Monoblock Class D Car Amplifier with JL Audio RBC1 Remote Bass Control
Feature
AMPLIFIER: JX Series Monoblock Amplifier 500 rms @ 4ohms 750 rms @ 3ohms and 1000 rms @ 2ohmsUnregulated PWM switching type power supply, Variable Bass Boost (0 to +12 dB bass boost centered at 45 Hz), Soft start turn-on prevent clicking and popping when system turns on, Dimensions: 11"L x 7-3/4"W x 2"H
BASS CONTROL:JL Audio RBC1 Remote Bass Control, Remote Bass Control Works with Original Slash Series
JL Audio Amplifiers and the New V2 Slash, Remotely controls Bass EQ of JL Audio amplifiers, Low-profile design for custom installations, Overrides on-board boost control
CUSTOMIZATION: Choose your free Air Freshener. (Assorted Colors)
Description
JL Audio JX1000/1D 1000 Watt RMS Monoblock Class D Car Amplifiermono subwoofer amplifier- 500 watts RMS x 1 at 4 ohms (1,000 watts RMS x 1 at 2 ohms)
- Class D amplifier design
- MOSFET switching power supply
- frequency response: 20 Hz - 150 Hz
- variable low-pass filter (50-200 Hz, 12 dB/octave)
- variable bass boost (0-12 dB at 45 Hz)
- optionalwired remote level control
- preamp inputs and outputs
- speaker-level inputs
- 4-gauge power and ground leads and a 80-amp fuse recommended - wiring and hardware not included with amplifier
- no onboard fuses - when installing multiple amps in a system, an additional 80-amp in-line fuse between the distribution block and the amplifier is recommended
- 11-5/16"W x 2-1/8"H x 7-11/16"D
JL Audio RBC1
- remote bass control for JL Audio A-Series, G-Series, RD Series, and Slash v2 amplifiers (except the 300/2v2 and the 300/4v2)
- allows variable (0-12 dB) bass boost in JL Audio A-Series and G-Series amps
- remote level control for RD Series and mono JL Audio JX-Series amps (JX250.1, JX500.1, and JX1000.1)
- 18' remote cable and mounting hardware included
- 13/16"W x 13/16"H x 1-5/8"D
4. Jl audio mx500/1 Amplifier Compact Marine/Powersports 500watt Subwoofer amp 1-Channel
Feature
Marine Grade500 Watt
MonoBlock 1-Channel Subwoofer AMP
Compact
Description
JL Audio MX500/1 Monoblock 500W RMS Compact Marine Powersports Amplifier5. XD600/1 - JL Audio 600 Watt Class D Monoblock Subwoofer Amplifier
Feature
Monoblock Subwoofer AmplifierDifferential-balanced with RCA jack inputs
State-variable, 12 dB/octave Butterworth or 24 dB/octave Linkwitz-Riley with continuously variable cutoff frequency selection from 50 - 500 Hz (defeatable).
Buffered pass-through type
24 dB/octave Butterworth @ 30 Hz, defeatable
Description
RMS Power Rating (14.4V): 4 ohms: 400 watts x 1 chan. 2 ohms: 600 watts x 1 chan. RMS Power Rating (12.5V): 4 ohms: 300 watts x 1 chan. 2 ohms: 500 watts x 1 chan. Unregulated MOSFET switching type power supply NexD Ultra-High Speed Class D topology Wired JL Audio HD-RLC remote level control sold separately LED power (green) and protect (red/yellow) indicators State-of-the-art microelectronic components Mono channel operation Advanced Thermal Rollback System completely eliminates annoying thermal shut-down events Studio-grade signal processing with fully variable crossover filters Extruded aluminum alloy system setting security cover Total amplifier efficiencies exceeding 80% Noise-killing, highly flexible differential-balanced inputs Preamp RCA outputs to daisy chain multiple amps Defeatable low-pass and infrasonic crossover filters Dual speaker terminals simplify speaker installation 3-Way System Protection circuitry (thermal, overload, and speaker short protection) Heavy duty compact unitary cast alloy heat sink for extreme heat dissipation Silver-plated RCA level inputs Silver-plated screw terminals Input sensitivity: Level: 100mV-4V Variable low-pass filter (50-500 Hz, 12 dB/octave Butterworth or 24 dB/octave Linkwitz-Riley) Infrasonic Filter (30 Hz, 24dB/octave Butterworth) Damping factor: >1,000 @ 4 ohms / 50Hz, >500 @ 2 ohms / 50Hz Frequency response: 7-500 Hz Dimensions: 8-1/2"L x 7-1/16"W x 2-1/16"H RMS Power @ 4 ohms 400 watts x 1 channel RMS Power @ 2 ohms 600 watts x 1 channel RMS Power @ 1 ohm Not Stable Total RMS Power Output 600 watts Maximum Input Gauge Size 4 AWG Minimum Impedance Unbridged 2 ohms THD at Rated RMS Power 1.0% Preamp Outputs 1 pair Built-in Crossover Low-pass (LP) Low-Pass Crossover Frequency 50 - 500 Hz Subsonic Filter 30 Hz Signal-to-Noise Ratio 87 dB Channel Separation 67 dB JL Audio HD-RLC Fuse Rating 50A x 16. HD1200/1 - JL Audio Monoblock 1200W Subwoofer Speaker Amplifier
Feature
Patented Single Cycle Control technology delivers reference-grade audioTightly regulated, intelligent power supply maintains full power at any impedance from 1.5-4 ohms and at any supply voltage from 11v-14.5v
Fully variable frequency selection from 50-500Hz with detented, calibrated potentiometer.
Remote level control with optional controller
Dimensions: 10.74 in W x 8.29 in D x 1.5 in H
Description
JL Audio HD Series Monoblock Class D Amplifier RMS Power Rating (11V-14.5V): 4 ohms: 1200 watts x 1 chan. 3 ohms: 1200 watts x 1 chan. 2 ohms: 1200 watts x 1 chan. 1.5 ohms: 1200 watts x 1 chan. Max power output: 1200 watts x 1 chan. MOSFET power supply Remote bass level input (HD-RLC required and sold separately) LED power indicators Single channel operation Preamp RCA outputs Single Cycle ControlTM Heavy duty aluminum alloy heatsink for heat dissipation RCA level inputs Screw terminals Variable high-pass filter (50-500 Hz, 24 dB/octave) Variable low-pass filter (50-500 Hz, 24 dB/octave) Frequency response: 6-30,000 Hz Optional wired remote level control: JL Audio HD-RLC Optional stacking equipment for HD amplifiers: JL Audio HD Stack Kit Dimensions: 10-13/16"L x 8-1/4"W x 1-15/16"H 2-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier. Power Specifications - Subwoofer Channel RMS Power @ 4 ohms 1200 watts x 1 channel RMS Power @ 2 ohms 1200 watts x 1 channel RMS Power @ 1 ohm 1200 watts x 1 channel at 1.5 ohms Peak Power Output 1200 watts x 1 channel Amplifier Specifications Amplifier Class D Number of Channels 1 - Mono Total Peak Power Output 1200 watts Total RMS Power Output 1200 watts Maximum Input Gauge Size 2 AWG Minimum Impedance Unbridged 1.5 ohms Minimum Impedance Bridged N/A THD at Rated RMS Power 1% Speaker Level Inputs No Preamp Outputs 1 pair Built-in Crossover Low-pass (LP) High-pass (HP) High-Pass Crossover Frequency 50 - 500 Hz Low-Pass Crossover Frequency 50 - 500 Hz Subsonic Filter 30 Hz Signal-to-Noise Ratio 110 dB Channel Separation N/A Bass Boost N/A Bass/Gain Remote Optional (Accessory required and sold separately) JL Audio HD-RLC Fan Cooled No Fuse Rating N/A CEA-2006 Compliant Yes7. Jl Audio Jx500/1d Mono Subwoofer Amplifier - 500 Watts RMS X 1 at 2 Ohms with JL Audio RBC1 Remote Bass Control
Feature
PACKAGE UNCLUDES: JX500/1D - JL Audio Monoblock 500W RMS Class D JX Series Amplifier, JL Audio RBC1 Remote Bass ControlAMPLIFIER:JX500/1D - JL Audio Monoblock 500W RMS Class D JX Series Amplifier
BASS CONTROL:JL Audio RBC1 Remote Bass Control, Remote Bass Control Works with Original Slash Series JL Audio Amplifiers and the New V2 Slash, Remotely controls Bass EQ of JL Audio amplifiers, Low-profile design for custom installations, Overrides on-board boost control
MOSFET switching power supply, Optional wired remote level control, Speaker-level inputs, Dimensions: 7-7/8"W x 2-3/16"H x 7-11/16"D
CUSTOMIZATION: Choose your free Air Freshener. (Assorted Colors)
Description
Jl Audio Jx500/1d
- mono subwoofer amplifier
- 340 watts RMS x 1 at 4 ohms (500 watts RMS x 1 at 2 ohms)
- Class AB amplifier design
- MOSFET switching power supply
- frequency response: 10 Hz - 150 Hz
- variable low-pass filter (50-200 Hz, 12 dB/octave)
- variable bass boost (0-12 dB at 45 Hz)
- optionalwired remote level control
- preamp inputs and outputs
- speaker-level inputs
- 4-gauge power and ground leads and a 60-amp fuse recommended - wiring and hardware not included with amplifier
- no onboard fuses - when installing multiple amps in a system, an additional 60-amp in-line fuse between the distribution block and the amplifier is recommended
- 14"W x 2-1/8"H x 7-11/16"D
JL Audio RBC1
- remote bass control for JL Audio A-Series, G-Series, RD Series, and Slash v2 amplifiers (except the 300/2v2 and the 300/4v2)
- allows variable (0-12 dB) bass boost in JL Audio A-Series and G-Series amps
- remote level control for RD Series and mono JL Audio JX-Series amps (JX250.1, JX500.1, and JX1000.1)
- 18' remote cable and mounting hardware included
- 13/16"W x 13/16"H x 1-5/8"D
8. JL Audio RD1000/1 NexD Monoblock Class D Car Audio Amplifier
Feature
JL Audio RD-Series RD1000/1 | Class-D Monoblock Amplifier | RMS Power Rating: 4 ohms: 500 watts x 1 chan. | 2 ohms: 1000 watts x 1 chan. Total power output: 2000 watts | CEA-2006 Compliant AmplifierDifferential-Balanced Inputs | Speaker-level (high-level) inputs: JL Audio XD-CLRAIC2-SW Required, sold separately | NexDTM Technology delivers outstanding sound quality, efficiency and reliability | LED clipping indicators | Pulse Width Modulated MOSFET power supply
LED power (green) and protect (red) indicators | Soft start turn-on | Mono channel operation | Preamp RCA outputs to daisy chain multiple amps | 3-way protection circuitry (thermal, overload, and speaker short protection)
Dual speaker terminals simplify the hookup of multiple speakers | Heavy duty aluminum alloy heat-sink for extreme heat dissipation | Total Harmonic Distortion (THD): <1% | Variable low-pass filter: 50 - 500 Hz, 12 dB/octave | Low-Pass Slope (dB/octave): 12 dB/octave
Variable Bass Boost: 0 to +12 dB bass boost at 45 Hz | Fuse Rating: 80 A x 1 | Dimensions: 7"W x 14-11/16"L x 2-3/16"H
Description
JL AUDIO RD1000/1 MONOBLOCK 1000 WATTS RMS SUBWOOFERS SPEAKERS BASS CAR AMPLIFIER NEW9. JL Audio XD600/1v2 Mono subwoofer amplifier - 600 watts RMS x 1 at 2 ohms
Feature
RMS Power Rating @14.4V: 4 ohms: 400 watts x 1 chan. | 3 ohms: 500 watts x 1 chan. | 2 ohms: 600 watts x 1 chanRMS Power Rating @12.5V: 4 ohms: 300 watts x 1 chan. | 3 ohms: 400 watts x 1 chan. | 2 ohms: 500 watts x 1 chan.
NexDTM High Speed Switching Class D Technology | Wired HD-RLC remote level control available, sold separately | LED power (green), over-current (yellow) and protect (red) indicators
Selectable Low-Pass Filter Slope: 12 dB or 24 dB | Variable low-pass filter: 50 - 500 Hz, 12 or 24 dB/octave | Fuse Rating: 30A x 1 inline (not supplied)
Dimensions: 7.09"W x 8.52"L x 2.05"H
Description
JL AUDIO XD600/1V2 MONOBLOCK 600W RMS CLASS D SUBWOOFERS SPEAKERS AMPLIFIER NEW10. JL Audio M-RBC-1 Water Resistant Bass Knob
Feature
Water Resistant Remote Bass Control | IPX6 Rated (splash-proof, not submersible) | Intended to be Flush Mounted | Requires access to rear of desired panel location | Requires a 3/8" hole to be drilled | Low-profile design for custom-look installationsIncludes 18 ft. control cable | Black ABS Knob Black plastic replacement knob available, sold separately: JL Audio Black Knob | Satin-Finish Aluminum replacement knob available, sold separately: JL Audio Aluminum Knob | Mounting hardware included
Controls the Bass Level of the following and features a water resistant connection cover: JL Audio HX300/1 (in Low Pass Mode) | JL Audio MHX300/1 (in Low Pass Mode)
Controls the Bass Level of the following: JL Audio JX250/1 | JL Audio JX500/1 | JL Audio JX500/1D | JL Audio JX1000/1D
Controls Bass EQ boost feature of the following: JL Audio Slash 600/1v3 | JL Audio Slash 1200/1v3 | JL Audio Slash 250/1v2 | JL Audio Slash 500/1v2 | JL Audio Slash 1000/1v2 | JL Audio Slash 450/4v2 | G-Series (All Models) | A-Series (All Models) | e-Series (All Models, including marine versions) | M-Series (Select Models)
