If you looking for automotive lift rubber pads then you are right place. We are searching for the best automotive lift rubber pads on the market and analyze these products to provide you the best choice.
Best automotive lift rubber pads
1. DEDC Jack Pad Universal Slotted Frame Rubber Jack Pad Medium Size, Frame Rail Protector
Feature
Maximum Load Bearing: 2 Ton; UNIVERSAL:Fits most Jacks and vehicles, please verify dimensions and ensure fitment to your vehicle.DURABLE: Durable rubber construction, medium size provides more cushion and crush resistance.
USEABLE: Protects Pinch Weld Seams and Frame Rails from bending or breaking when jacking up your car with these jack pads.
HELPFUL: Prevent your frame rails from bending when using a Jack to lift your car. Soft rubber surface, do not scratch painted or coated chassis parts.
DIMENSIONS: 75mm Diameter 35mm Height, Slot Dimensions: 10mm Wide 15mm deep.By the way,this rubber jack pad smells like rubber is supposed to smell,a little bit stinks when new.
Description
Maximum Load Bearing: 2 TonDEDC Jack Pad
This is a must have product for any professional or home mechanic. Many car and truck Repair Manuals will tell you to jack up your vehicle by the standard jack points which can be on the pinch seam weld or the frame rail
Often times for vehicles too low or in an emergency situation the factory side jack points need to be utilized. Protect your frame rails when jacking up your car with these jack pads. Without proper support the thin rails bend and cause future use of them to be problematic, and even unsafe if the jack cannot secure to the jack point.
slotted jack pad
2. Auto Lift Parts - BendPak or Danmar Square Rubber Replacement arm Pads (Slip on Style) for 2 Post Lifts - Set of 4
Feature
This listing is for one set of 4 square rubber arm pads for BendPak Lifts.These molded rubber arm pads are 5-5/8" square and are 1-1/16" thick. They are designed to slip over your lift's existing 4-3/4" X 4-3/4" square steel adapter tops. Always measure your existing pads before ordering.
No hardware is required.
Equivalent to BendPak part number 5715365
Description
This set includes 4 pads.3. ULTRA HEAVY DUTY replacement pads for Forward, Gemini and Eagle auto lifts - set of 4
Feature
This set includes 4 pads and all the mounting hardware you will need (as pictured)This listing is for one set of 4 ultra heavy duty 6 ply octagon shaped pads (aka stop sign shaped) that fit some 2 post lifts under the following nameplates: Forward, Gemini, Eagle, Worth, American and Grand
These pads are die-cut from belted rubber and offer better durability over the molded pads and so-called heavy duty die cut pads.
They measure 5" X 5" and have two thru-holes at 3-3/4" centers for mounting to the lift's adapter tops. Please note that there are different versions of these pads. These will only work on the models listed above.
These pads also fit Tuxedo TP11KACD lifts
Description
This listing is for one set of 4 ultra heavy duty 6 ply octagon shaped pads (aka stop sign shaped)4. Replacement Kits ALM Round Lift Pad
Feature
ALM Round Replacement Lift Pad is made from a Very High Quality and Durable NBR (Nitrile) rubber.Our pads offer easy Slip-On Style for faster replacement
OEM Equivalent ALM Round lift pad will replace the following: LP616 BH-7150-02
Satisfaction Guaranteed
Description
Replacement Kits Aftermarket Set of 4 Rubber Lift Pads for ALMPads fit the following models and features:
ALM Round Replacement Lift Pad is made from a Very High Quality and Durable NBR (Nitrile) rubber.
Our pads offer easy Slip-On Style for faster replacement
Replacement Kits OEM Equivalent ALM Round lift pad will replace the following LP616 BH-7150-02
5. Lift Pads Nussbaum, Phoenix, Force (earlier) Molded Rubber Pad
Feature
Lift Pads Nussbaum, Phoenix, Force (earlier) Molded Rubber PadLP605
Description
LP605 Lift Pads Nussbaum, Phoenix, Force (earlier) Molded Rubber Pad
6. Rotary FJ2439 1-1/2" Tall Fat Polymer Adapter Block, Set of 4
Feature
Set of four 1 1/2 Inch tall flat polymer adapterAdapter surface measures 4 3/4 Inch x 6 5/16 Inch
3,500 lb. capacity
Used on Rotary Lifts with lifting pads and on rolling jacks
Description
Set of four 1 1/2 Inch tall flat polymer adapter. Adapter surface measures 4 3/4 Inch x 6 5/16 Inch and is 3,500 lb. capacity. Used on Rotary Lifts with lifting pads and on rolling jacks.7. Auto Lift / Rolling Jack Rubber Block Pad Adapter Set of ( 2)- 4 3/4"X6 5/16X3"
Feature
This listing is for a set of2 flat polymer adapter used to protect vehicles with factory applied undercoatingRubber pad surface measures 4-3/4" X 6-5/16. Includes (2) 3" thick adapters
3,000 lbs. per adapter
These blocks are reinforced with fibers and may be rough on the bottom side where the mold marks are ground off as shown
see our other listings for other quantities
Description
Auto Lift / Rolling Jack Flat Polymer rubber Pad Adapter Set Of 28. Lift Pads Ammco/Ben Pearson Replacement (Set of 4)
Feature
Set of 4 Lift Pads with Hardware for Ammco/ Ben PearsonEquivalent to LP600, BH-7101-00, 82365 & 91559
Pads Lift AMMCO Lifts Ben Pearson Lifts Challenger Lifts Weaver Lifts
Highest Quality Longest lasting Parts on the Market
100% Satisfaction GUARANTEED
Description
Set of 4 Lift Pads with HardwareEquivalent to LP600
BH-7101-00
82365
91559
Fits some: AMMCO Lifts Ben Pearson Lifts Challenger Lifts Weaver Lifts
9. Auto Lift Parts - Ultra Heavy Duty Replacement Pads for TP9KF, TP9KAF, TP9KAC, TP11KAC, TP15 - Set of 4
Feature
This listing is for one set of 4 ultra heavy duty 6 ply octagon shaped pads (aka stop sign shaped) that fit some 2 post lifts under the following nameplates: Kernal, Tuxedo, ProKar, Duro Manufacturing, North American, Sunco, Automotive Equipment Depot, Red Line Engineering, Metro, Panther, Best Buy Automotive Equipment and others.These pads are die-cut from belted rubber and offer better durability over the molded pads and other so-called heavy duty die cut pads.
They measure 5" X 5" and have two thru-holes at 3-3/4" centers for mounting to the lift's adapter tops. Please note that although these pads are 8 sided, they are cut differently from other 8 sided pads.
To assure accuracy, please refer to the model number of your lift and the information in this listing. These pads will ONLY work on the following models: TP9KF, TP9KAF, TP9KAC, TP11KAC and TP15.
Description
This set includes 4 pads and all the mounting hardware you will need (as pictured)10. Auto Lift/Rolling Jack Rubber Block Pad Adapter Set (2)-4 3/4" X6 5/16X11/2
Feature
This listing is for a set of2 flat polymer adapter used to protect vehicles with factory applied undercoatingRubber pad surface measures 4-3/4" X 6-5/16. Includes (2) 1 1/2" thick adapters
3,000 lbs. per adapter
These blocks are reinforced with fibers and may be rough on the bottom side where the mold marks are ground off as shown