Finding your suitable sanitary valve is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best sanitary valve including detail information and customer reviews. Let’s find out which is your favorite one.
Best sanitary valve
1. Sanitary Stainless Steel 304 Tri Clamp Butterfly Valve with Trigger Handle and EPDM Seal, 1.5" Tube OD (2 Pack)
Feature
Type:Stainless Steel 304 Tri Clamp Butterfly Valve with Trigger Handle and EPDM SealSanitary Food Grade
SS Muti-Position Handle
Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp
All wetted surfaces are sanitary finished to <32Ra.
Description
Sanitary Stainless Steel 304 Tri Clamp Butterfly Valve with Trigger Handle and EPDM Seal, 1.5" Tube OD(2 Pack)2. Dernord 1"Sanitary Ball Valve Fits 1.5" Tri-Clamp Clover Stainless Steel 304, PTFE Lined, Two Way & Three Piece (1 Inch Tube OD Quick Clamp)
Feature
Sanitary Ball Valve Size 1" Tube OD Quick Clamp, fits Tri-Clamp: 1.5"Sanitary Ball Valve Material and Function Sanitary Ball Valve is made of FOOD GRADE LEVEL MATERIAL stainless steel 304 which have high strength and great corrosion resistance
Sanitary Ball Valve Specification Maximum pressure rating: 1000 psig for WOG. Maximum working temperature: -65 Degrees to 300 degrees Fahrenheit
Sanitary Ball ValveAdvantage Quick clamp connection for disassembling and cleaning in place
Great Design Non-Retention Sanitary Ball: 2-Way & 3-Piece Contruction, Lockable oval handle for manual on/off control
Description
From the Manufacturer
The DERNORD Sanitary Ball Valves series stainless steel 304 three-piece inline sanitary ball valve has a mounting pad and lockable lever handle and tube OD quick clamp connections on both ends. This valve body is made of stainless steel 304 for higher strength and greater corrosion resistance than stainless steel 302. This valve has a lockable lever handle for manual on/off control. PTFE seats reduce the risk of leakage. The valve is full port for reduced friction; its inner diameter is the same as the inner diameter of the connecting pipe for maximum operating efficiency. This valve has tube OD quick clamp connections for disassembling and cleaning in place. The maximum pressure rating is 1000 pounds per square inch (gauge) (psig) for water, oil, and gas (WOG), and the maximum working temperature is 300 degrees Fahrenheit.
Product Features
Non-Retention Sanitary Ball: 2-Way & 3-Piece Contruction
Fits Tri-Clamp: 1.5"
Quick Clamp Tube OD: 1"
Material: 304 Stainless Steel
Maximum pressure rating: 1000 psig for WOG
Maximum working temperature: -65 Degrees to 300 degrees Fahrenheit
If you have any product problem concerned,please don't hesitate to contact us as soon as possible,we will try our best to solve it for you.
3. Dernord Sanitary Butterfly Valve with Pull Handle Stainless Steel 304 Tri Clamp Clover (1.5" Tube OD)
Feature
Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clampTemperature Rating (spec): 15F thru 200F; Material (spec): 304 Stainless Steel
Tri-Clamp butterfly valve Max Pressure 1.6MPA
100 Percent pressure hydraulic tested for reliability
The pull style handle allows you to set the valve in four different positions simply by pulling and turning
Description
1.5 inch Sanitary Butterfly Valve:The pull style handle allows you to set the valve in four different positions simply by pulling and turning. 100 Percent tested / 100 percent inspected. 100 Percent pressure hydraulic tested for reliability. Wetted surfaces polished to 3-A standards. Actuation available: double-acting, air-to-spring, electric.
DERNORD butterfly valve is a type of flow control device, used to make a fluid start or stop flowing through a section of pipe. It is well applied to stainless steel pipe systems for food beverage, dairy, brewing, pharmaceuatical, bio-pharmaceuatical and chemical industries. The handle for manual operation mechanically lock the valve in its full open, half open and closed position. By rotating the handle, the motion disk either parallel or perpendicular to he flow of water, shutting off the flow.
4. Tri Clamp Sanitary Butterfly Valve, 2" (2 inch) OD:64MM,ID:48MM,3 position,Silicone Seal Stainless Steel 304 + 2PCS PTFE Gasket + 1PCS EPDM Seal
Feature
Sanitary butterfly valve made by stainless steel 3042 inch Sanitary butterfly valve
2" Sanitary butterfly valve
Tri-Clamp butterfly valve Max Pressure 1.6MPA
Maxtemperature:300F,Max.fluidoperationpressure:1.6MPa
Description
SpecificationMaterial: Stainless steel 304
Handle: 3 position plastic handle
Seal: Silicone
Operating Temperature : 15 F to 200 F
Pressure1.6MPA
Size:
3/4" OD:50.5MM ID:19.0MM
1" OD:50.5MM ID:22.5MM
1-1/2" OD:50.5MM ID:35.1MM
2" OD:64MM ID:47.8MM
3" OD:91MM ID:72.7MM
4" OD:119MM ID:97.6MM
6" OD:166MM ID:144MM
5. BokyWox 1.5" Sanitary Butterfly Valve with Tri-Clamp Cover Stainless Steel (Ball 1.5 inch)
Feature
Tube OD: 1 1/2 Inch,100 Percent pressure hydraulic tested for reliability
Tri-Clamp butterfly valve Max Pressure 1.6MPA
Temperature Range: 10-+120
The pull style handle allows you to set the valve in four different positions simply by pulling and turning
Description
Butterfly valve is a type of flow control device, used to make a fluid start or stop flowing through a section of pipe. It is well applied to stainless steel pipe systems for food beverage, dairy, brewing, pharmaceuatical, bio-pharmaceuatical and chemical industries. The handle for manual operation mechanically lock the valve in its full open, half open and closed position. By rotating the handle, the motion disk either parallel or perpendicular to he flow of water, shutting off the flow.6. Dernord Butterfly Valve with Trigger Handle Stainless Steel 304 Tri Clamp Clover (1.5 Inch Tri Clamp Butterfly Valve)
Feature
Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clampThe Trigger style handle butterfly valve - 13 Positions
Temperature Rating (spec): 15F thru 200F; Material (spec): 304 Stainless Steel
Tri-Clamp butterfly valve Max Pressure 1.6MPA, 100 Percent pressure hydraulic tested for reliability
The Trigger style handle allows you to set the valve in four different positions simply by pulling and turning
Description
1.5 inch Butterfly Valve:Tri Clamp butterfly valves are an elegant and dependable solution for either a shutoff service, or as a flow control valve to reduce volume. Designed for Tri Clamp fittings and made from stainless steel SS304, our trigger handle series butterfly valves feature a fiberglass handle with 13 locking positions, that allow flow control typically desired on a racking arm. 100 Percent tested / 100 percent inspected. 100 Percent pressure hydraulic tested for reliability. Wetted surfaces polished to 3-A standards. Actuation available: double-acting, air-to-spring, electric.
DERNORD butterfly valve is a type of flow control device, used to make a fluid start or stop flowing through a section of pipe. It is well applied to stainless steel pipe systems for food beverage, dairy, brewing, pharmaceuatical, bio-pharmaceuatical and chemical industries.
7. Dernord Sanitary Sample Valve 1.5" Tri Clamp Ferrule OD 50.5MM with Elliptic Handle
Feature
Outlet connection: 10MM Hose barbConnection: 1.5" Tri Clamp: Ferrule OD 50.5MM
Combined with 1.5 inch tri clamp silicone gasket (not included), available with clamp ends
Body material: Stainless Steel 304
Stainless Steel Flow Control Equipment for the Food, Beverage, Dairy, Cosmetics, Pharmaceutical, Biotechnology, and Electronics Processing Industries
Description
The DERNORD Sample valves are used in piping systems or on tanks for sampling. It is used for low viscosity materials, such as water, beer, wine, fluid milk and so on. It has a maximum operating pressure rating 150 (psi depending on the valve size) at 70 degrees F ambient temperature. It is suitable for use in the food, beverage, biotech, pharmaceutical, and other hygienic applications. When purchasing fittings, consider the application, as this will affect material type, shape, size, pressure drop and required durability.
8. Homend 1.5" Sanitary Tri Clamp Butterfly Valve with Trigger Handle and Silicone Seal, Stainless Steel 304 (1.5" OD:38.1MM; Ferrule Size : 50.5MM)
Feature
Sanitary Food Grade, CNC Machine, Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp304 Stailless Steel and ABS Trigger handle.
Max temperature : 300 F, Max. fluid operation pressure: 1.6 MPa
Silicon Gasket; 100 Percent pressure hydraulic tested for reliability
Packge Includes: 1 set of the 1.5" Sanitary Tri Clamp Butterfly Valve with Trigger Handle
Description
Application:Used To Make A Fluid Start Or Stop Flowing Through A Section of Pipe
Well Applied To Stainless Steel Pipe System
For Food, Brewery, Dairy, Brewing,Pharmaceutical And Chemical Industries
Specification:
Valve material:304 Stainless Steel
Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp
Sealing material: Silicone
Connection: Clamp
Surface finish: 0.4m
Work Pressure: 0 - 1.6MPa / 232psi
Applicable Temperture: -10 ~ +135
Applicable Medium:Water, Oil
Package Includes:
1 set of the 1.5" Sanitary Tri Clamp Butterfly Valve with Trigger Handle