Top 10 best axial monster truck rtr

Finding the best axial monster truck rtr suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.

Best axial monster truck rtr

Product Features Editor's score Go to site
Axial SCX10 II Jeep Cherokee 4WD RC Rock Crawler Unassembled Off-Road 4x4 Electric Crawler, 1/10 Scale Kit Axial SCX10 II Jeep Cherokee 4WD RC Rock Crawler Unassembled Off-Road 4x4 Electric Crawler, 1/10 Scale Kit
Go to amazon.com
Axial SCX10 II Jeep Cherokee 4WD RC Rock Crawler Off-Road 4x4 Electric RTR with 2.4GHz Radio and Waterproof ESC, 1/10 Scale Axial SCX10 II Jeep Cherokee 4WD RC Rock Crawler Off-Road 4x4 Electric RTR with 2.4GHz Radio and Waterproof ESC, 1/10 Scale
Go to amazon.com
Axial 1/10 SCX10 II '69 Chevrolet Blazer 4WD RTR RC Rock Crawler Off-Road 4x4, 1/10 Scale, Blue Axial 1/10 SCX10 II '69 Chevrolet Blazer 4WD RTR RC Rock Crawler Off-Road 4x4, 1/10 Scale, Blue
Go to amazon.com
Axial Wraith Spawn 4WD RC Rock Racer Off-Road 4x4 Electric Ready to Run with 2.4GHz Radio and Waterproof ESC, 1/10 Scale RTR Axial Wraith Spawn 4WD RC Rock Racer Off-Road 4x4 Electric Ready to Run with 2.4GHz Radio and Waterproof ESC, 1/10 Scale RTR
Go to amazon.com
Axial Yeti 4WD RC Rock Racer Off-Road 4x4 Electric Ready to Run with 2.4GHz Radio and Waterproof ESC, 1/10 Scale RTR Axial Yeti 4WD RC Rock Racer Off-Road 4x4 Electric Ready to Run with 2.4GHz Radio and Waterproof ESC, 1/10 Scale RTR
Go to amazon.com
Axial RR10 Bomber 4WD RC Rock Racer Off-Road 4x4 Electric Ready to Run with 2.4GHz Radio and Waterproof ESC, 1/10 Scale RTR Axial RR10 Bomber 4WD RC Rock Racer Off-Road 4x4 Electric Ready to Run with 2.4GHz Radio and Waterproof ESC, 1/10 Scale RTR
Go to amazon.com
AXIAL Yeti Jr. SCORE Trophy Truck 1/18th Scale Electric 4WD - RTR AX90052 AXIAL Yeti Jr. SCORE Trophy Truck 1/18th Scale Electric 4WD - RTR AX90052
Go to amazon.com
Axial SMT10 Grave Digger Monster Jam 4WD RC Monster Truck Off-Road 4x4 Electric Ready to Run with 2.4GHz Radio and Waterproof ESC, 1/10 Scale RTR Axial SMT10 Grave Digger Monster Jam 4WD RC Monster Truck Off-Road 4x4 Electric Ready to Run with 2.4GHz Radio and Waterproof ESC, 1/10 Scale RTR
Go to amazon.com
Axial Wraith 4WD RC Rock Racer Off-Road 4x4 Electric Ready to Run with 2.4GHz Radio and LED Light Kit, 1/10 Scale RTR Axial Wraith 4WD RC Rock Racer Off-Road 4x4 Electric Ready to Run with 2.4GHz Radio and LED Light Kit, 1/10 Scale RTR
Go to amazon.com
HobbyKing Axial SMT10 Grave Digger Monster Jam 1/10th Scale Electric 4WD Truck RTR HobbyKing Axial SMT10 Grave Digger Monster Jam 1/10th Scale Electric 4WD Truck RTR
Go to amazon.com
Related posts:

1. Axial SCX10 II Jeep Cherokee 4WD RC Rock Crawler Unassembled Off-Road 4x4 Electric Crawler, 1/10 Scale Kit

Feature

An officially licensed scale replica that's optimized for exciting all-terrain adventure!
The innovative AR44 Hi-Pinion axle adds durability, boosts ground clearance and improves driveshaft angles.
Details include a licensed body, JCR Offroad Vanguard bumpers, 1.9 inch BFGoodrich All-Terrain T/A KO2 tires and METHOD Mesh wheels.
Licensed Icon Vehicle Dynamics shocks are threaded for quick height adjustment and are completely rebuildable and tunable.
Kit comes ready to customize with your favorite components.

Description

The SCX10 II 2000 Jeep Cherokee all-terrain vehicle kit is the ultimate mix of exceptional engineering and superior scale realism! The innovations start with the first-in-its-class AR44 Hi-Pinion axle, which increases durability, adds ground clearance and improves driveshaft angles. Universal joint axles allow up to 45 of steering, and an 8 kingpin angle helps maximize efficiency. The tough, all-metal gear transmission is 2-speed capable, and the steel c-channel frame rail chassis is extra-rigid. Scale details include a licensed body, JCR Off-road Vanguard bumpers, 1.9" BFGoodrich All-Terrain T/A KO2 tires and METHOD Mesh wheels. Officially licensed 1/10 scale 2000 Jeep Cherokee body BF Goodrich All-Terrain T/A KO2 tires Black 1.9 Method Mesh wheels JCR Classic Rock Sliders, Vanguard Bumpers and Pre-runner Roof Rack Weight is forward-biased for improved handling Full-time 4WD locked drivetrain Durable, all metal gear transmission that's 2-speed capable First-in-class AR44 Hi-Pinion axle that increases ground clearance Steel C-channel side rails and all-aluminum suspension links Chassis mounted servo (CMS)Waterproof receiver box Universal joint axles allowing up to 45 of steeringRequirements: Radio system Steering servoMotorESC6-cell NiMH or 2-3S LiPo battery Charger AA batteriesSpecifications: Length: 22.1 inches (562 millimeters)Width: 8.9 inches (228 millimeters)Height: 10.5 inches (268 millimeters)Wheelbase: 12.3 inches (312 millimeters)Ground Clearance: 3 inches (77 millimeters)RTR Weight: 4.5 pounds (2 kilograms)Jeep, the Jeep grille and related logos, vehicle model names and trade dress are trademarks of FCA US LLC and used under license by Axial Inc. 2016 FCA US LLC.

2. Axial SCX10 II Jeep Cherokee 4WD RC Rock Crawler Off-Road 4x4 Electric RTR with 2.4GHz Radio and Waterproof ESC, 1/10 Scale

Feature

Blaze new trails and crawl over obstacles with the SCX10 II, topped off with a scale replica of the iconic 2000 Jeep Cherokee body.
It's the latest iteration of the highly acclaimed SCX10 chassis platform, combining durability and adjustability with greater ground clearance.
With up to 45 degrees of steering radius the SCX10 II Jeep Cherokee is exceptionally maneuverable and fun to drive.
The steel C-channel frame rail chassis is just one example of this vehicle's superior strength and toughness.
Enjoy secure, intuitive control with the Tactic TTX300 radio system

Description

Axial takes off-roading to another level with the SCX10 II with 2000 Jeep Cherokee body. A full-time four-wheel drive locked drivetrain and dual slipper clutch let you take on the most unforgiving terrain. The speed control and receiver box are sealed, and the steering servo is water-resistant, so you can defy the elements. Officially licensed by BF Goodrich, the All-Terrain T/A KO2 tires provide consistent gripping power, and they're mounted on Method Mesh wheels. The front and rear bumpers and rock sliders are true-to-scale and licensed by JCR Off-road. Among the molded detail parts on the body are mirrors, door handles, lift gate trim panel and a rear tow hitch. Requirements: strong6-cell Nickel-Metal Hydride or 2S Lithium-Polymer battery Compatible battery charger(4) AA batteries for the transmitter Specifications: strong Length: 22.1 inches (562 mm)Width: 8.9 inches (228 mm Height: 10.5 inches (268 mm)Weight: 4.5 pounds (2.04 kg)Wheelbase: 12.3 inches (313 mm)Ground Clearance: 3.0 inches (77 mm)Jeep and related logos, vehicle model names and trade dress are trademarks of Chrysler Group LLC and are used under license by Axial Inc.; Chrysler Group LLC 2014.

3. Axial 1/10 SCX10 II '69 Chevrolet Blazer 4WD RTR RC Rock Crawler Off-Road 4x4, 1/10 Scale, Blue

Feature

1:10 RC crawler loaded with scale looks and an aggressive stance, built on the rugged SCX10 II chassis, making this bad Blazer a beast in any terrain
Primed for performance with Axial's proven AX10 transmission, WB8 HD Wildboar Driveshafts, AR44 Universal Axle Set, Dual Slipper Clutch, and more
Strong c-channel chassis frame for durability, chassis-mounted servo to eliminate bump steer, and adjustable battery tray to improve center of gravity
Fully Assembled RTR Includes: Tactic 2.4GHz TTX300 3-Ch SLT Radio Transmitter, TR325 Receiver, Metal Gear Servo, AE-5L Waterproof ESC, and 35T Motor
Needed to Complete: 6-cell NiMH or 2-3S LiPo Battery and a compatible Battery Charger (all sold separately)

Description

Realistic RC scale details.

Classic looks. Open-air top. Aggressive stance. These are just some of the characteristics that describe Axial's gorgeous 1969 Chevrolet Blazer, an radio control rig that's as comfortable climbing to the top of a mountain as it is cruising on the beach.

But this Blazer sports more than just a macho look. Additional items like chrome-coated grille, mirrors and door handles are included. Officially licensed Chassis Unlimited front and rear tube bumpers are mounted tight to the body for maximum clearance and a set of offroad light (with LEDs) shine some light when the action goes dark.

To keep the Blazer rolling along in even the toughest situations, it is mounted on our rugged SCX10 II chassis. High-clearance AR44 high-pinion axles, a chassis mounted servo (CMS), re-designed AX10 transmission case and tough steel suspension links are just a few of the parts that make the Blazer a beast on any terrain.

  • High pinion gears for added ground clearance and better driveshaft angles
  • The high pinion design allows increased gear surface contact for increased durability
  • Larger load bearings used around the gear set to reduce flex and create a stronger drivetrain
  • AR44 front and rear axles feature a single-piece design with molded truss for extreme durability.
  • 1-piece all-metal locker front and rear
  • Universal joint axles allow up to 45 degrees of steering and provide smoother action for a higher performing, efficient drivetrain.
  • Small pumpkin for increased clearance and a more realistic, scale look
  • Bolt on link mounts
  • Knuckle carriers and straight axle adapters have a better mounting system with 10-degree increment adjustments
  • Optimized gear ratio - 3.75 compared to 2.92 previously. This reduces torque twist which is typically seen with other small pumpkin axle designs

AR44 Single Piece Axle: The pinion gear is 6mm above center, this allows for added ground clearance and better driveshaft angles. The high pinion design has an increased surface contact for increased durability. AR44 front and rear axles feature a single-piece design with molded truss for extreme durability. Integrated C-hubs and lockouts offer optimized performance as well as improved ground clearance. Helical, metal cut internal gears, and high-quality bearings are all standard equipment.

Steel C-Channel Frame Rail Chassis: The realistic high strength c-channel chassis frame is made of durable steel with cross bracing for reinforcement and is held together with all hex hardware. Realistic looking frame and cross braces improve chassis rigidity (torsional stiffness). Realistic shock hoops with multiple shock mounting positions allows you to adjust your suspension for maximum performance. The simplified design makes maintenance and assembly quick and easy. The contoured skid plate significantly reduces hang-ups on terrain. Compared to the previous design, additional holes have been added to the rear portion of the frame rails for making wheelbase adjustments.

Adjustable Battery Tray: The new adjustable battery tray is now relocated lower and further forward for better weight distribution and center of gravity (COG).

  • Adjustable tray that prevents the battery from coming loose or shifting while driving
  • Posts are included to fine tune the fit based on the battery you choose
  • Easy access for quicker battery changes
  • Can accommodate batteries up to 32x44x147mm (3S 5,000 mAh)

Waterproof AE-5L ESC with Drag Brake: The Axial AE-5L ESC is 3S LiPo capable yet easily switched 'in the field' between LiPoand NiMh battery types with a simple jumper - no more complex procedures.

  • LED Light controller built-in with dual LED outputs for headlights/taillights.
  • Male Star Plug lead - compatible with the most common polarized plug.
  • Jumper 1 provides a simple plug and play choice between LiPo or NiMh.
  • Jumper 2 switches Drag Brake settings.
  • Waterproof design with Star Plug / laser etched heat sink.

Includes:

  • RTR SCX10 II 1969 Chevrolet Blazer 4WD with Oil-Filled Shocks
  • 1.9 inch Falken Wild Peak M/T All-Terrain Tires, mounted on 1.9 inch METHOD Hole Wheels
  • Painted Body
  • Rock Sliders
  • Tactic TTX300 3-Ch 2.4GHz Radio Transmitter (Tx)
  • Tactic TR325 2.4GHz Receiver (Rx)
  • AE-5L Waterproof ESC
  • 35T Electric Motor
  • Decals
  • Pre-installed LED Lights (2)
  • Instruction Manual

Needed to Complete:

  • 6-cell NiMH or 2-3S LiPo Battery
  • Compatible Battery Charger

4. Axial Wraith Spawn 4WD RC Rock Racer Off-Road 4x4 Electric Ready to Run with 2.4GHz Radio and Waterproof ESC, 1/10 Scale RTR

Feature

Built to blast through wide-open deserts and the toughest trails
Ripsaw 2.2 tires are a proven true grip standard, wrapped around industry proven Method IFD beadlock wheels
Full tube-frame chassis design is manufactured with high strength composite materials
Realistic driver figure includes a race suit and three interchangeable helmets
Includes vehicle, body, 2.4GHz radio, motor, ESC, and figure

Description

The Axial Wraith Spawn is packed with performance features. The virtually bulletproof AR60 OCP axles are ready take the Spawn through its paces whether blasting through the wide open desert or hammering its way through the toughest rock trails. The Ripsaw 2.2 tires are a proven true grip standard, wrapped around industry proven Method IFD beadlock wheels. Whether you are rock racing or just backyard bashing, the Wraith Spawn is ready for action.

The waterproof receiver box utilizes three different silicone seals: one for the antenna, one for the servo wires (includes three slots for three channels), and one acts as a gasket for the receiver box cover. No more stress when running in mud, water, or snow!

Our dual slipper design clutch uses a pad on each side of the spur gear for added surface area. This allows for more precise tuning and holding power. The spur gear features strong, 32 pitch gearing for high torque applications.

Officially licensed Method 12 spoke beadlock wheels dressed in an aggressive all black style are easy to assemble and they work with most 2.2 tires. The hub design allows this wheel to mount to any Wraith, AX10 Ridgecrest or SCX10. Axial 2.2 Ripsaw tires offer both a realistic and aggressive tread design for the ultimate scale appearance and performance.

The Axial waterproof AE-5 ESC is 3S LiPo capable yet easily switched in the field between LiPO and NiMh battery types with a simple jumper.

The AX-3 2.4GHz transmitter is a two channel, pistol grip radio with servo reversing switches for steering and throttle, trim dials for fine tuning steering and throttle centers. The battery indicator light also lets you know when your transmitter batteries run low. AR-3 2.4GHz receiver uses no crystals so you'll experience worry free driving with no frequency conflicts. This lightweight, compact, and bind button equipped receiver with LED indicator makes setup easy.

The included Tactic water-resistant TSX45 metal gear servo is rated at 151 oz-in of torque for massive turning power and dual ball bearings provide smooth and precise movement for the metal gear train.

The WB8 HD front and rear driveshafts feature an updated design with a larger diameter cross pin (2x11mm) along with an M4 Screw Shaft (2mm hex drive) for added strength. A center splined slider floats between each end and features added material which reduces flex and fatigue.

The Wraith Spawn includes a realistic driver figure complete with a race suit and three interchangeable helmets. A motocross, open skull-face or motorsport version of the helmet are included.

The Wraith Spawn includes a number of features that are either waterproof or water resistant. Do not run your product in water or snow or submerge it in water without fully waterproof gear.

Requires: 6-cell NiMH or 2S LiPo pack, charger and four "AA" batteries

5. Axial Yeti 4WD RC Rock Racer Off-Road 4x4 Electric Ready to Run with 2.4GHz Radio and Waterproof ESC, 1/10 Scale RTR

Feature

Expertly engineered for serious fun
Independent front suspension and solid rear axles provide a no-compromise mix of high speed and smooth handling
Precision machined aluminum shocks deliver smooth suspension movement for consistent handling
Realistic scale details include polycarbonate interior tray with molded driver figures and dashboard
Includes Yeti Rock Racer with radio, ESC, brushless motor, body, body accessories, and instruction manual

Description

The Yeti is a skillfully engineered rock racing vehicle with a solid rear axle and independent front suspension. Its strategically engineered design supplies bashing stamina while delivering a high level of technical rock racing abilities without compromise in either category. Its powered by a 3150kV 4-pole brushless motor which provides the perfect amount of torque and speed. The long can design provides a massive amount of power, especially when powered by 3S. Precision machined aluminum shocks are standard equipment and deliver smooth suspension movement for consistent handling.

Features:

  • Painted and detailed body.
  • Brushless 3150kV Motor perfectly blends torque and speed for ripping performance in the open and taught control in tough terrain.
  • Axial 2-channel AX-3 2.4GHz Radio System with reversing switches and trim settings.
  • Waterproof receiver box.
  • WB8 Wild Boar Rear Drive Shaft features a large diameter cross pin and M4 screw shaft for added strength.
  • Waterproof Vanguard manually-programmable ESC by Castle.
  • Detailed model with driver and passenger figures.
  • Precision-machined shocks provide enhanced damping through the whole range of wheel travel.
  • Metal gear hi-torque servo delivers 151 oz-in of torque for massive turning power.
  • Dual ball bearings for smooth and precise movement.
  • Easy-access battery tray is fully adjustable and fits most standard 2S and 3S LiPo batteries.
  • Hi-Lo Transmission has all metal internal gears, full ball bearing transmission for extra endurance on tough courses at full, brushless power.
  • Independent front suspension allows wheels to react independently from each other.
  • 4-Link rear suspension delivers advanced tuning options for optimal performance.
  • Long travel sway bar increases stability at high speeds.

Requires 2S or 3S LiPo pack, LiPo charger, and four "AA" batteries

6. Axial RR10 Bomber 4WD RC Rock Racer Off-Road 4x4 Electric Ready to Run with 2.4GHz Radio and Waterproof ESC, 1/10 Scale RTR

Feature

The included aluminum King Shocks feature precision machined pistons which offer smooth performance throughout the range of travel.
Our high strength composite plastic tube frame chassis is impact resistant to help protect the RR10 from crash damage.
BFGoodrich Baja T/A KR2 tires in S30 compound wrapped around officially licensed 2.2 Walker Evans Racing wheels.
All metal gear transmission (48P and 32P) and a full set of ball bearings for strength and efficiency.
Includes RR10 Bomber with motor, ESC, 3-channel radio, tires, wheels, interior detail, and instruction manual

Description

The Axial RR10 Bomber is a replica of the Bomber Fab KOH rock racing rig, featuring a front mounted battery tray under the hood making for easy access and weight right where you need it! The skid plate provides a centralized location for the electronics with clean wire routing and an RR10 specific transfer case for optimal driveline efficiency. We've also included a full set of BFGoodrich BAJA T/A KR2 tires along with a spare in the back, wrapped around officially licensed Walker Evans Racing wheels. We've included a variety of shock mounting points for running dual shock setups and more suspension tuning options. For additional rear suspension tuning, you'll find a sway bar mount connected to the cage, under the fuel cell (sway bar sold separately). Officially licensed aluminum King Shocks feature precision machined pistons which offer smooth performance throughout the range of travel. Standard features include durable front and rear WB8 HD Wild boar driveshaft's, front and rear AR60 axles, a dual slipper clutch, Hi-Lo transmission with all metal internal gears, a 3-channel radio system, realistic scale details including molded driver figures, three pairs of helmets, molded shock reservoirs, a fuel cell, Bomber Fabrication body panels and graphics, and a fully licensed scale tube chassis.Features: Easy component access Low COG and correct suspension geometry for optimal handling Full tube frame Updated skid plate for Yeti Rear suspension and Yeti-derived transmission4WDLicensed Walker Evans wheels and BFG KO2 TiresAR60 front and rear axles Strong 32P gearing for high-torque applications Licensed aluminum King Shocks56T Spur Gear, 12T Pinion Waterproof receiver box Dual slipper clutch design Lexan interior with molded driver figure Forward-mounted easy access battery tray New steering knuckles and double shear captured tie rods New link mounts, added position for dual shocks/sway bar New differential covers Output for multi-axle AR60 buildsWB8-HD DriveshaftsRR-10 Specific Hi-Lo transmission Drivetrain mounted to new RR10-specific skid plate and electronics assembly Optional 2-speed servo mount included for use with the separate AX31181 set Machined aluminum polished shock bodies with King Blue plastic components and super-soft blue springs Optional mounts for dual shocks front and rearRequirements:2S or 3S LiPo batteries (electronic speed controller to match selected battery)Compatible charger(4) AA batteries Track and maintenance equipmentSpecifications: Length: 22.4 inches (570 millimeters)Width: 11 inches (280 millimeters)Height: 9 inches (230 millimeters)Weight: 6.25 pounds (2.83 kilograms)Wheelbase: 14.75 inches (375 millimeters)Ground Clearance: 2.8 inches (72 millimeters)

7. AXIAL Yeti Jr. SCORE Trophy Truck 1/18th Scale Electric 4WD - RTR AX90052

Description

A wee bit smaller, while still providing a high level of performance. They've taken all that youve come to love and appreciate in the Yeti chassis, but shrunk it down to 1/18th scale. Its powered by a 380 sized brushed motor which provides the perfect amount of torque and speed for this tiny Trophy Truck monster. Also featuring a bespoke all-in-one programmable Tactic ESC and receiver, paired with a 3-wire micro high torque steering servo. At the end of the day, the goal was to build a simple, fun, and easy to drive Yeti that anyone can handle. And to top it off they've went straight to Roger Norman, CEO/President of SCORE International, for his blessing and for official licensing. 1/18th Scale. 380 Sized brushed motor. Tactic ESC and receiver. Micro high torque steering servo. Official licensing. Ready-To-Run Complete EVERYTHING YOU NEED IS INCLUDED! In a fast paced world where space is limited and ease of use is paramount, charging the supplied Onyx 6-cell NiMH battery needs to be simple and convenient. This is where the Onyx USB NiMH Charger comes into play. Its small, compact, and easy to operate. Thats all thats required. Simply plug into a USB power source and plug the NiMH battery into the charger and youre charging. DURATRAX ONYX 7.2V NiMH BATTERY Other batteries make claims to charge / discharge rates that cant be substantiated, but Onyx packs are true rated, so they deliver on their performance promises. Now there are more capacity and configuration options to choose from, and all are priced to fit within a sport modeler's budget! AA BATTERIES The radio is powered by four AA alkaline batteries (included). AR18 Solid Axile To help keep the scale premise in check, simply shrinking down an existing axle was just not an option. In keeping the proportions correct along with yi

8. Axial SMT10 Grave Digger Monster Jam 4WD RC Monster Truck Off-Road 4x4 Electric Ready to Run with 2.4GHz Radio and Waterproof ESC, 1/10 Scale RTR

Feature

A licensed scale replica of the legendary Monster Jam truck that has been thrilling crowds for over 30 years
Captures every detail of the full-size 1950 panel van body, complete with authentic grave digger graphics and a scale interior with driver figure.
Designed for maximum strength, with a tube frame chassis and roll cage very similar to modern era full-size Monster trucks.
A heavy-duty suspension with lots of shock mounting options enhances control, making the grave digger incredibly fun to drive.
The receiver and speed control are waterproof, keeping the elements out and keeping you in the action.

Description

The grave digger is one of the most popular trucks on the monster Jam circuit, and this true-to-scale replica is just as frighteningly fierce. It's engineered to withstand extreme off-roading and come back for more, with a rugged, highly adjustable suspension and heavy-duty driveshaft's front and rear. The tires are purpose-built, officially-licensed bkt tires mounted on satin silver monster truck wheels. On-board electronics are protected, and the battery tray is easily accessed at the rear of the AXID9055 for equipping the grave digger with more powerful lithium-polymer battery packs. 2016 Feld motor sports, Inc. Monster Jam, United States hot rod association, ushra and grave digger are trademarks used under license by Feld motor sports, Inc. All Rights Reserved.

9. Axial Wraith 4WD RC Rock Racer Off-Road 4x4 Electric Ready to Run with 2.4GHz Radio and LED Light Kit, 1/10 Scale RTR

Feature

Impressive 1:1 scale looks, high-speed monster truck bashability, and technical crawl capabilities
Full tube composite construction with composite skidplate
4-wheel drive locked differentials and AR60 OCP-Axle (Off-Centered Pumpkin Design)
Transmission is equipped with a slipper clutch and steel output gears; upgradable for three-function "Dig" feature
Includes Wraith Rock Racer with 20T motor, AE-2 ESC, cockpit, 2.4GHz radio, waterproof receiver box, metal gear steering servo, and six LED Lights

Description

The Wraith Ready-to-Run Rock Racer is built to go fast and is not just a low speed rock crawler. It changes the game with its impressive 1:1 scale looks, high-speed monster truck "bashability," and technical "crawl" capabilities. Realistic looks, drivability and ready-to-run ease make this vehicle the perfect blank canvas for the enthusiast looking for a vehicle to build upon. The versatile Wraith can go everywhere and satisfies the needs of a wide range of enthusiasts. It can be a desert sand vehicle, mountain trail runner, rock racer, mud bogger and backyard basher.

Features:

  • Realistic full tube-frame chassis design manufactured with high strength composite materials
  • 20T motor
  • Vertically-mounted AE-2 ESC with drag brake and Tamiya-style plug connector
  • True 4-wheel drive locked differentials provide improved traction, and the AR60 OCP-Axle (Off Centered Pumpkin Design) gives more ground clearance and a better driveshaft angle
  • AX-3 2.4GHz 2-channel radio, metal gear steering servo and waterproof receiver box
  • Locked Differentials provide positive wheel traction and less maintenance
  • 4-Link Suspension
  • Oil-filled shocks with silicone diaphragms and bushings and 3.5mm
    titanium nitride coated shafts
  • Fully licensed Corbeau LG1 race seats
  • 2 Ripsaw tires and 2.2 Raceline Renegade wheels
  • Battery Tray sized for standard stick pack or LiPo pack; no disassembly or tools needed to remove/replace the battery
  • Six LED lights are included (4 white LED lights for the front and two red LED lights for the rear) and added bonus of 14 light buckets (additional LEDs not included)

Requirements:

  • 2V 6-cell NiMH stick pack or 7.2V 2S LiPo pack
  • Battery charger
  • 4 AA batteries for transmitter

Specifications:

  • Wheelbase: 13.9 in (353 mm)
  • Width: 11.02 in (280 mm)
  • Height: 9.3 in (237 mm)
  • Length: 19 in (483 mm)
  • Ground Clearance: 3.15 in (80 mm)
  • Weight: 5.44 lbs (2.48 kg)

10. HobbyKing Axial SMT10 Grave Digger Monster Jam 1/10th Scale Electric 4WD Truck RTR

Description

Features: Tube frame chassis 2.2 BKT Monster Jam tires 2.2 High strength monster truck wheels H/Duty hydraulic ram style steering links Trailing arm 4-linked rear suspension AR60 OCP axle Dual pad slipper clutch H/Duty driveshafts Multiple shock mounting positions Rear swaybar for added stability Waterproof receiver box Easy access battery tray Replica Grave Digger polycarbonate body shell Glow in the dark helmet set High power 27T motor ESC with drag brake 2.4GHz radio Metal geared high torque ballraced servo Specs: Radio: 2.4GHz (included) ESC: AE-5 (included) Steering Servo: TSX45 metal geared ballraced (included) Battery: 7.2~9.6V Nimh/7.4~11.1V LiPoly (not included) Wheelbase: 353mm Length: 483mm Width: 335mm Height: 270mm Ground Clearance: 74mm Weight: 3.22kg Required: 1 x 7.2~9.6V NiMh battery or 1 x 7.4~11.1V LiPoly battery Suitable charger for above 4 x AA batteries

Conclusion

By our suggestions above, we hope that you can found the best axial monster truck rtr for you. Please don't forget to share your experience by comment in this post. Thank you!

You Might Also Like