Finding the best fireworks electric firing system suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best fireworks electric firing system
1. eMylo DC 12V 6x 1 Channel RF Relay Wireless Remote Control Switch 433Mhz Transmitter with Receiver
Feature
The product adopts RF technology, with long remote control distance and stable signal.The receiving module provides high signal sensitivity at lower cost and resist interference for excellent stability.
It adopts non-directional wireless encoding technology, allowing independent control without mutual interference.
The programmable transmitter and receivers can be flexibly configured in quantity and in operating modes.
It is widely used in industrial control and security fields, such as light, motor, remote controller, wireless security alarm, wireless door alarm, wireless controller, etc.
Description
Transmitter:Operating Voltage: 12V
Operating Frequency: 433Mhz
Vibration Resistance: 126
Chip Type: 2264
Modulation: ASK (Stable, less interference)
Encode Type: Pads
Battery Type: 12V 23A(not included)
Remote Distance: 150m (Theoretical value)
Ambient TEMP: -30 -70, Humidity<95%
Product DIM: 105x48x15mm
Receiver:
Input Voltage: DC 12V
Operating Frequency: 433Mhz
Coding Way: Intelligent Learning
Output Type: Active Output
Max load: 10A
Ambient TEMP: -30 -70, Humidity<95%
Factory Default: Self-locking
Board DIM: 45x30.5x17mm
Case DIM: 65x37x22mm
Package Includes:
2x Transmitters
6x Receivers
1x English Manual
Notice:
All remote control switch kits support 433mhz frequency, and no interference each other, if you buy many kit and hope for interference, please contact us when you place order.
2. hot sale 1.2 inch 20 shots AL racks for single shot or roman candles, fireworks racks, display racks, shell racks for display, fireworks firing system
Feature
1.Special for single shot and stage fountains;tube size from 20mm to 40mm;2.It is made of pure aluminium alloy
3. Each tube has a stainless steel leaf spring,it can be adjusted by different size fireworks
4.You can adjust the angle for display effect
5. More size and models available
Description
Package by paper carton Weight: 4.2KG3. BILUSOCN hot sale 1.2 inch 12 shots AL racks for single shot or roman candles, fireworks racks, display racks, shell racks for display, fireworks firing system
Feature
Each tube has a stainless steel leaf spring,it can be adjusted by different size fireworksIt is made of pure aluminium alloy
You can adjust the angle for display effect
Special for single shot and stage fountains;tube size from 20mm to 40mm;
More size and models available
Description
It is made of pure aluminium alloyEach tube has a stainless steel leaf spring,it can be adjusted by different size fireworks
You can adjust the angle for display effect
4. hot sale 2 inch 18 shots AL racks for single shot or roman candles, fireworks racks, display racks, shell racks for display, fireworks firing system
Feature
1.Special for single shot and stage fountains;tube size from 32mm to 61mm;2.It is made of pure aluminium alloy
3. Each tube has a stainless steel leaf spring,it can be adjusted by different size fireworks
4.You can adjust the angle for display effect
5. More size and models available
Description
Package by paper carton Weight: 8.5KG5. 2000pcs/lot K1 wire connectors, for igniters connecting for fireworks display, with a pliers for gift, fireworks firing system with DHL cost
Feature
1.Fireworks Igniters Connectors2.Packing-- 200pcs in one bag, 10 bags in one box, 10boxes in one case.
3.Functions--It is for connecting two pcs igniters or wires
4.Coin sizes be applicable-- 0.4-0.7MM
5.How to use it--Put two wires into the connector, then use the plier .And now two wires is connecting. Features--It is , safety and easy for use. And it's great for fireworks display .
Description
K 1 MOQ: 2000pcs wire connectors Product description: fireworks display, wire connectors, firing system , ematches6. hot sale 1.2 inch 12 shots AL racks for single shot or roman candles, fireworks racks, display racks, shell racks for display, fireworks firing system
Feature
1.Special for single shot and stage fountains;tube size from 20mm to 40mm;2.It is made of pure aluminium alloy
3. Each tube has a stainless steel leaf spring,it can be adjusted by different size fireworks
4.You can adjust the angle for display effect
5. More size and models available
Description
Package by paper carton Weight: 4.2KG7. 2000pcs K1 wire connectors fireworks firing system wire connecting for fireworks
Feature
K1 wire connector, it can use for the wire connecting of fireworks igniter.Suitable Wire Conductor Diameter: 0.4mm-0.7mm.
Package: 200 pcs per bag, 10 bags per box. Total 2000 Pcs.
Color: Orange.
Description
How to use it: Open the top cover of the connector, put two wire into the hole of the connector, then use the pliers to close the cover. Now two wires is connected.8. hot sale 1.2 inch 8 shots AL racks for single shot or roman candles, fireworks racks, display racks, shell racks for display, fireworks firing system
Feature
1.Special for single shot and stage fountains;tube size from 20mm to 40mm;2.It is made of pure aluminium alloy
3. Each tube has a stainless steel leaf spring,it can be adjusted by different size fireworks
4.You can adjust the angle for display effect
5. More size and models available
Description
Package by paper carton Weight: 3.5KG9. Single Cue Remote Wireless Control System Stage and Wedding Equipment EMB01-01R
Feature
1.Two igniting modes: Single(Dividual), Sequential2. The receiver is programmable. Test Function.
3. Frequency&Transmitting Rang: OOK, 433MHz, 200M
4. Power supply: Receiver 9V battery, Transmitter 12V 23A battery
5. Included in the system: One EMB01 receivers, one ETX200-1 transmitter
Description
1.One cue remote control system, include one receiver, one remote transmitter ETX200-1.2. Each cue could ignite 3-5 pcs products in parallel or 6-10 pcs products in series.
3. The receiver is programmable, it learns the code of the transmitter with the button "Learn", if the receiver or the transmitterhas some problem, it can be replaced with another.
4. Test Function: The Test LED will be lit if the product is connecting well.
5. Short protection: The receiver can not be damaged by a short in cue.
6. Low voltage indication.
7. Transmitting Rang: 200 meters
8. Frequency: OOK, 433MHZ
9. CE/ FCC Passed.
10. Receiver size: 60x50x47mm
11. Power supply(not included in the item) :
Receiver: 9V battery
Transmitter: 12V 23A battery
10. 4 Cue Remote Wireless Control System Stage and Wedding Equipment EMB01-04R
Feature
1.Two igniting modes: Single(Dividual), Sequential2. The receiver is programmable. Test Function.
3. Frequency&Transmitting Rang: OOK, 433MHz, 200M
4. Power supply: Receiver 9V battery, Transmitter 12V 23A battery
5. Included in the system: 4 EMB01 receivers, 1 ETX200-4 transmitter
Description
1.4 cue remote control system, include 4 pcs receivers, one remote transmitter ETX200-4.2. The system has tow working modes. Single mode, Sequential mode(interval time 0.1S, 0.2S, 0.3S, 0.4S, 1.1S, 1.2S, 1.3S, 1.4S). If you buy a extra 12-buttons-transmitter(ETX2000-12) , it also has Salvo mode and Step mode.
3. Each receiver could ignite 3-5 pcs products in parallel or 6-10 pcs products in series.
4. The receiver is programmable, it learns the code of the transmitter with the button "Learn", if the receiver or the transmitterhas some problem, it can be replaced with another.
5. The receiver learns the code of the transmitter to number the receiversin sequence. They work according to thesequence number while Sequential mode.
6. Test Function: The Test LED will be lit if the product is connecting well.
7. Short protection: The receiver can not be damaged by a short in cue.
8. Low voltage indication.
9. Transmitting Rang: 200 meters
10. Frequency: OOK, 433MHZ
11. CE/ FCC Passed.
12. Power supply:
Receiver(not include): 9V battery
Transmitter: 12V 23A battery
13. Two working modes (1) Single mode. Just the corresponding receiver ignites according to the button of the transmitter which the receiver had learned. (2) Sequential mode. Firstly, you should number the sequence of receiver while it learns the code of the transmitter, then choose which group it belongs to. The sequence number could be 1,2,3,.....48. Then press the button of the transmitter, all the cues will be ignited at a identical time interval(0.1-2.0 seconds). Switch the Function Switch of the receiver, you can set the interval time.