Finding the best fuel injector cleaning kit suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best fuel injector cleaning kit
1. BG 44K Fuel System Cleaner Power Enhancer 11oz.
Feature
Fuel system cleaner quickly cleans fuel injectors, valves and combustion chambersOne can will treat 20 gallons of gasoline
Restores performance and gas mileage
Proven to increase combustion quality and power output
Compatible with all fuel system materials, alcohol-blended fuels and common fuel additives
Description
This fuel system cleaner, added to gasoline, quickly and effectively cleans the entire fuel system, including fuel injectors, intake valves, ports and combustion chambers. Because it provides efficient removal of upper engine deposits, this product reduces problems caused by deposit build-up such as engine surge, stalling, stumble, hesitation and power loss. BG 44K quickly restores engine performance and improves driveability. It will provide quick clean-up of coked fuel injectors and corrosive deposits on the fuel sending unit. It is compatible with all fuel system materials, alcohol-blended fuels, common fuel additives. Contains no alcohol. Catalytic converter, and oxygen sensor safe. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.2. beler Universal Auto Car Fuel Injector Nozzle Flush Cleaner Adapter DIY Cleaning Tool Kit Set
Feature
This DIY Injector Cleaner adaptor kit is easily to clean most car motorcycle fuel injectorsPackage include two white tubes and two crocodiles clip charger cable to fits two different size injectors
Injector power by the 12v battery, meanwhile cleaning liquid flush through white tube, then through injector to clean it
Requires aerosol can of fuel injection cleaner (not included)
Requires also 12v DC battery power supply (not included)
Description
Specifications:
Material:Metal& Plastic
Cable Length:75cm (29.52inch)
Compatible With:
Fit for most car, motorcycle fuel injectors.
FIT for VW: Golf, Sagita, Beetle, Caddy, Passat,Polo, Jetta
FIT for Mercedes-Benz: A / B / C / E / M / SClass, CLA, GLK, CLS
FIT for Audi: A3, A4, A5, A6, A8
FIT for BMW: 1 / 3 / 4 / 5 / 7 Series, X1, X3,X4, X5, X6
FIT for Mazda: 3, 6, CX-5, CX-7
FIT for Honda: Accord, City, Civic, CR-V,Odyssey, Fit
FIT for Ford: Focus, Edge, Fusion, Mustang
FIT for Toyota: Camry, 4Runner, Corolla,Highlander, Prius, Sienna, Yaris
Fuel Injector Nozzle models: Fit for Bosch Denso Delphi Siemens Magneti Marell (except Cylinder Direct-Injection Nozzle)
PackageIncluded:
2xpowercables(2size)
2xfuelcleaninginjectornozzles(2size,Large size: for European/USA vehicles; Small size: for Japan/ Korea vehicles)
Description:
1, Once an injector becomes clogged and its spray pattern is changed from a mist to a stream, the injector must be replaced or cleaned.
2,Replacing injectors can be difficult and always expensive, so cleaning is a good first option if you have the right equipment.
3, For cleaning fuel injectors and diesel fuel pumps, the fuel Injector Flush Cleaner is portable, simple to use.
3. Wisamic Automotive Non-dismantle Fuel Injector Cleaner Kit and Tester with Case for Petrol EFI Throttle Petrol Cars, 750ML Tank, 145PSI
Feature
Non-Dismantle Fuel System Cleaner: This Fuel System is used to clean fuel injector, air intake system and three-way catalytic converter. It is a free disassembly cleaning tools that you can use it without the knowledge of car assembling.Special Handing: Non-dismantle cleaner has special handling one-way valves to seal up gas and durable pressure regulating valves.
Multi-function: Our cleaner tool not only features with high and low pressure cleaning function, but also with the whole fuel system including throttle valve, fuel nozzle and combustion chamber.
Universal Feature: Non-dismantle fuel injector has anti-corrosion, anti-friction connectors for fast- connection and anti-friction oil tubes for all cleaning fluid.
Complete Cleaner Kit: This injector clean kit includes many different adapters, covering almost all the EU, Asia, USA cars and light trucks. Note: For some USA cars, you have to change the air plug to 3/8" which is not included in the package.
Description
FeaturesAnti-friction oil tubes, suitable for all cleaning fluid
Special handling one-way valves, able to seal up gas
Durable pressure regulating valves
Multi-functional valves for fluid adding and gas releasing
Rotate to add fluid, gas releasing speed controlled with different force level
Check fuel injection model, throttle or EFI:
EFI Model:
1. Find out the fuel return hose, disconnect it and plug it with suitable adapter
2. Find out the fuel inlet hose, disconnect it and connect it with the outlet hose of the cleaner with proper adapter
3. Connect the outlet and return hose of the fuel tank, and open the tank cover; if there is not return hose, please move the fuse of the fuel pump so that the pump will not work
4. Charge the cleaning fluid into the tank of the cleaner
5. Connect the air source power to the air port of the cleaner, adjust its pressure 40-50PSI
6. Check all connect point to make sure there is not leakage
7. Start the engine to clean the fuel system.
To the throttle:
To the throttle system, the way of connection is the same, just adjust the pressure of the air source 1-5PSI. The way to identify the inlet and return hose:
-. Generally speaking, inlet hose is bigger, return hose is smaller;
-. There is always a filter connected in the inlet hose side, and a buffer in the return side;
-. There is arrow on the hose to show the fuel flow direction. Specification:
Pressure: 0-145PSI
Tank: 750ml
Case size: 42x36x12 (cm) Package includes:
1 x Fuel Injector Cleaner
1 x Suitcase for kits NOTE:
-Clean liquid is not included. Work on gasoline injector only, do not use it on diesel injector.
-For some US cars, you have to change the air plug to 3/8" which is not included in the package.
4. OTC Tools 7649A Fuel Injector Cleaning Kit
Feature
Canister features stainless steel construction with a wide throat to reduce spillage - safely holds up to 22 ouncesEasy to read 3-1/2 inch gauge, with protective cover, for setting accurate delivery pressure
Hose material meets SAE J30R9 standard for gasoline and ethanol blended fuels - removable for ease of storage
Includes our most common rail adapters for many domestic and import applications (see description below for full list), also includes decarbonizing adapter
Includes 'blow-out' fitting for use with shop air supply to remove residual chemicals from hose
Description
The OTC 7649A has everything you need to begin direct injector cleaning and decarbonizing. At the core of this kit is the OTC 7448A Fuel Injection Cleaner Canister which provides you with a heavy duty stainless steel container for years of service - a wide throat for spill proof fluid transfer - 3-1/2" easy to read mechanical pressure gauge - removable hose constructed to handle aggressive cleaners and ethanol fuels without cracking or swelling - easy to open/close ball valve for immediate system control - blowout fitting attachment to clean your tool when finished - and of course the OTC adapter Application Manual (6550MAN-13) showing all the information you need to work on virtually all vehicles manufactured between 1997 - 2013 in the US. In addition to this, the OTC 7649A Fuel Injector Cleaning Kit includes a spring lock coupling adapter, several quick connect and banjo fittings, as well as a decarbonizing adapter for throttle plate/manifold cleaning. These adapters permit adapting the canister cleaner to many domestic and import vehicles. Clogged fuel injectors cause sluggish performance, poor fuel economy and rough idle. The OTC 7649A Fuel Injector Cleaning Kit is the right tool to start addressing these vehicles and get them back on the road.5. OTC Tools (7448A) Fuel Injection Cleaner Canister
Feature
Designed for direct fuel rail and injection cleaningDebris that is loosened or dissolved is then combusted and ultimately removed through the vehicles exhaust system
Machined from stainless steel, the hydraulic cylinder has a 22 ounce capacity, and is able to handle pressures up to 30,000 PSI
The full size cap makes adding solvents easy and spill proof
3-1/2" gauge makes setting the outlet pressure simple and accurate
Description
The OTC 7448A is designed for direct fuel rail and injection cleaning. Our recommended process runs your engine with a strong cleaning solvent, like OTC's 7000A Pro Inject-R Kleen (sold separately) - which is introduced directly into the fuel rail where maximum benefit is achieved. Debris that is loosened or dissolved is then combusted and ultimately removed through the vehicles exhaust system. It is machined from stainless steel hydraulic cylinder - has a 22 oz. capacity, and is able to handle pressures up to 30,000 psi. The full size cap makes adding solvents easy and spill proof. The 3-1/2" gauge makes setting the outlet pressure simple and accurate. Only a quarter turn is needed to open - or close the system. Our hose meets the SAE J30R9 standard for safe transfer of gasoline and ethanol blended fuels. Our hose is removable which improves storage options and if inadvertently damaged - very easy to replace. To improve performance life, we added a "blowout" attachment so any residual solvent can be removed from the hose with shop air supply. Finally, we include our Fuel Injection Application Manual 6550MAN-13. This accessory is packed full of pertinent information for gasoline powered vehicles from 1997 to 2013 model years and is ONLY available from OTC. We give you Fuel Pump Disconnect points, Fuel Rail Break-in points, OE fuel pressure specs and the correct OTC adapter required. For full coverage adapter sets see OTC 6550PRO - sold separately. If your vehicle fails to start, or is rough running, or maybe the fuel economy isn't what it should be; look to OTC for the service tools that can help. The safety and innovative features of OTC's 7448A are exactly what you need to get that vehicle back on the road!.6. Mityvac MV5565 Fuel Injector Cleaning Kit
Feature
FUEL INJECTION CLEANING KITDescription
Quickly and cleanly removes and prevents fuel injector deposits, and loosens and dissolves carbon on intake manifold and valves. Air induction system cleaning (requires separate purchase of MVA550 Decarb Nozzle) Enhances engine performance, improves fuel economy, reduces maintenance and improves emissions. Uses standard shop-air to deliver cleaning solution directly into the fuel stream or spray it into the air induction system (additional accessory required for induction system cleaning) Functions on most domestic and import cars with high or low pressure fuel systems High quality pressure gauge and adjustable regulator combination ensures proper delivery of cleaning solution. Durable steel and diecast aluminum construction Connects to vehicles with 3/8" quick-disconnect style fuel fitting. Additional adapters available and sold separately. INCLUDES: Fuel Injection Cleaner Assembly Manifold (includes pressure regulator and gauge, relief fitting, air nipple, inlet and outlet valves) 32 oz. (950 ml) (1000 cc) canister Connection Hose Wall Mount Bracket User's Manual (English, French, Spanish)7. OTC 4480 Stinger Basic Fuel Injection Service Kit
Feature
Performs running, residual, rail and flow rate pressure testsKit includes adapters, hoses and fittings to test fuel injection systems
Also includes two popular adapters for import vehicles as well as a GM TBI adapter
Professional dual scale gauge reads 0-100 PSI and 0-700 kPa with relief valve, fuel discharge hose and rubber boot
All packaged in a professional, heavy-duty, blow molded carrying case
Description
The new basic fuel pressure test Kit from Stinger by OTC, performs running, residual, rail, and flow-rate fuel pressure tests. The kit includes a professional, dual-scale pressure gauge (0-100 pounds per square inch and 0-700 kPa) with a relief valve, fuel discharge hose, and protective rubber boot. The kit also includes adapters, hoses, and fittings to test domestic fuel injection systems, two popular adapters for import vehicles, plus the GM TBI adapter. Whether youre a new technician looking to offer basic fuel pressure service or a full service shop; looking for a basic tool to complement your professional grade, fuel pressure service kit. This kit from Stinger by OTC, offers a great, value-based solution.8. ALLOSUN EM276 Fuel Injector Tester
Feature
Operates injectors individually to diagnose fuel delivery problems on petrol vehicles with Electronic fuel injectionWorks with engine off and pulse timer may be used with fuel pressure gauge
Large LED display/4 pulse modes test lead: 415cm/ 163 inches
It can work with any fuel pressure tester please Note: gasoline car only, not the diesel engine
Powered by vehicle's 12V battery
Description
The tester can help diagnose injector problems, you can use it to test each injector individually to help identify stuck, leaking or burnt-out conditions. It uses 12V vehicle battery for power. It has 4 pulse modes, the continuous mode (mode 4) helps identify good or bad injector. The mode lock feature ensures test condition uniformity. It can work with any fuel pressure tester.9. kweiny Auto Fuel Injector Nozzle Flush Cleaner Adapter DIY Cleaning Tool Universal Car Kit Set
Feature
Main Usage: As an adapter for DIY cleaning the fuel injector nozzle, removed the injector from the engine, it can be cleaned separately. When the injector is clogged, you can use it to save expensive nozzles;Compatibility: It has two sets of adapters of different sizes, it can be used for almost all brands of cars and motorcycle fuel injectors;
Working principle: The electrical port of the Injector connect the 12V power by this cable. When the current is switched on, the solenoid valve in the nozzle is opened. Meanwhile cleaning liquid flush through white tube by liquid pressure in CARB cleaner bottles, then through injector to clean it;
Working requirements: It needs the combination of 12V DC power supply and aerosol of Injector or carburetor cleaner ( not included ). Please prepare these necessary tools;
Package include: In order to be able to apply to all types of fuel injector nozzle, we have two sets of tools of different sizes. Maybe you just need to use one of them.
Description
Compatible car brand:GM ( Chevrolet, Buick, Cadillac ), Ford, Chrysler, Toyota, Volkswagen, Benz, Audi, BMW, Mazda, Honda, Nissan, Hyundai;
Compatible fuel injector nozzle brand:
Bosch, Denso, Delphi, Siemens, Magneti Marell ( except Cylinder Direct-Injection Nozzle );
Package included:
1 x users manual;
2 x fuel cleaning injector nozzle adapter ( 2 different specifications );
2 x power cables ( 2 different specifications );
( Large size: Fit for European/USA vehicles; Small size: Fit for Japan/ Korea vehicles )
Features:
Material: Metal + Plastic;
Weight: 180g;
Cable length: 32in;
Please refer to the picture of the upper left corner for detail size and color;
Notice:
It needs the combination of 12V DC power supply and aerosol of fuel injection cleaner ( package not include ). Please prepare these necessary tools;
10. Mophorn Non-dismantle Cleaner Automotive Non-dismantle Fuel Injector Tester and Cleaner Fuel System Fuel Injector Cleaner Tool Set for Petrol EFI Throttle (non-dismantle)
Feature
Tank Capacity: 600ml; Pressure: 0-140PSI;Working Temperature: -10~+50 (14~122)Non-dismantle cleaner has special handling one-way valves to seal up gas and durable pressure regulating valves
Non-dismantle fuel injector has anti-corrosion, anti-friction connectors for fast-connection and anti-friction oil tubes for all cleaning fluid
Fuel injector cleaner tool not only features with high and low pressure cleaning function, but also with the whole fuel system including throttle valve, fuel nozzle and combustion chamber
This injector clean kit includes many different adapters, covering almost all the EU, Asia, USA cars and light trucks(petrol 12V)
Description
Automotive Non-dismantle cleaner Tool Set for Petrol EFI Throttle
The automotive fuel injector cleaner tool is a set of automotive non-dismantle fuel system. Including many different adapters, it covers almost all the EU, Asia, USA cars and light trucks
Features
Automotive non-dismantle fuel system cleaner injector clean set
Anti-corrosion, anti-friction connectors for fast-connection
Anti-friction oil tubes, suitable for all cleaning fluid
Special handling one-way valves, able to seal up gas
Durable pressure regulating valves
Multi-functional valves for fluid adding and gas releasing
Rotate to add fluid, gas releasing speed controlled with different force level
Various connectors to fit for almost all the EU, Asia, USA cars and light trucks
Item Specifications
Pressure: 0-140PSI
Package Dimensions: 42*37*13cm
Shipping Weight: 3.66kg
Fit For: USA EU Asia cars and light truck (petrol 12V)
Check Fuel Injection Model, Throttle or EFI:
EFI Model :
1. Find out the fuel return hose, disconnect and plug with suitable adaptor
2. Find out the fuel inlet hose, disconnect and connect with the outlet hose of the cleaner with proper adaptor
3. Connect the outlet and return hose of the fuel tank and open the tank cover; if there is no return hose, please move the fuse of fuel pump so that the pump will not work
4. Charge the cleaning fluid into cleaner tank
5. Connect air source power to the air port of the cleaner, adjust its pressure to 40-50PSI
6. Check all connect points to make sure there is no leakage
7. Start engine to clean fuel system
Throttle Model:
Same connection method with EFI model, except air source pressure should be adjusted to 1-5 PSI
Package Included
1 x Fuel Injector Cleaner
1 x Adapter Kits
1 x Suitcase
