Top 10 best pex fittings tee 1 for 2019

Finding the best pex fittings tee 1 suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.

Best pex fittings tee 1

Product Features Editor's score Go to site
Pexflow PXRT1112-5 X PEX Barb Reducing Tee Pipe Fittings, 1 Pexflow PXRT1112-5 X PEX Barb Reducing Tee Pipe Fittings, 1" X 1" X 1/2", Brass (Pack of 5}
Go to amazon.com
LTWFITTING Lead Free Brass PEX Crimp Fitting 1 LTWFITTING Lead Free Brass PEX Crimp Fitting 1" x 1" x 1" PEX Tee (Pack of 5)
Go to amazon.com
10 PIECES XFITTING 1 10 PIECES XFITTING 1" X 1" X 1" PEX TEE - BRASS CRIMP FITTINGS (LEAD-FREE BRASS) NSF, FULL PORT
Go to amazon.com
SharkBite U374LFA Plumbing Fitting, 1-Inch, Brass SharkBite U374LFA Plumbing Fitting, 1-Inch, Brass
Go to amazon.com
Everflow Pushlock UPET1134 1 Inch x 1 Inch x 3/4 Inch Long Push Tees for Push-Fit Fittings, Made W/ Lead Free DZR Forged Brass, Connect PEX, CPVC and Copper, Pre-Lubricated Quick Installation Everflow Pushlock UPET1134 1 Inch x 1 Inch x 3/4 Inch Long Push Tees for Push-Fit Fittings, Made W/ Lead Free DZR Forged Brass, Connect PEX, CPVC and Copper, Pre-Lubricated Quick Installation
Go to amazon.com
SharkBite UC412LFA10 3/4 SharkBite UC412LFA10 3/4" x 1/2" Reducing Tee PEX Barb Fitting (10-Pack), Brass
Go to amazon.com
SharkBite UC362LFA10 1/2 SharkBite UC362LFA10 1/2" Tee PEX Barb Fitting (10-Pack), Brass
Go to amazon.com
3 pack- 1 X 1 X 3/4  Pex Brass Tee-With 3/4 on Branch- Crimp No Lead 3 pack- 1 X 1 X 3/4 Pex Brass Tee-With 3/4 on Branch- Crimp No Lead
Go to amazon.com
Watts PEX LFP-1142 Tee 1-Inch x 1-Inch x 1/2-Inch Barb Low-Lead, Brass by Watts Watts PEX LFP-1142 Tee 1-Inch x 1-Inch x 1/2-Inch Barb Low-Lead, Brass by Watts
Go to amazon.com
SharkBite UC370LFA10 3/4 SharkBite UC370LFA10 3/4" Tee PEX Barb Fitting (10-Pack), Brass
Go to amazon.com
Related posts:

1. Pexflow PXRT1112-5 X PEX Barb Reducing Tee Pipe Fittings, 1" X 1" X 1/2", Brass (Pack of 5}

Feature

HIGH QUALITY: Constructed of lead free (DZR) brass for superior reliability and strength
EASY TO USE: Fittings Work with Crimp Ring or Clamp Connection Methods
STYLE: Barb x barb x barb connection for PEX plumbing systems, Rated to 200F and 200 PSI
SIZE: Reducing Tees for sizes 1" X 1" X 90 Dedree 1/2" of Pex Pipes (pack of 5)
NSF, UPC and CSA approved, Manufactured to ASTM standard F1807

Description

The Pexflow PEX Barb Tee (5-Pack) is an easy to install, low cost solution to connect PEX Pipe. Pexflow PEX Barb fittings are compatible for potable water distribution and hydronic heating applications. These PEX fittings may be used with the stainless steel clamp system or the copper crimp ring system (both sold separately). The Pexflow PEX Barb fitting range offers a wide variety of Fittings, Manifolds, Valves, clamp rings, crimp rings and tools in various sizes to help complete your next plumbing project.

2. LTWFITTING Lead Free Brass PEX Crimp Fitting 1" x 1" x 1" PEX Tee (Pack of 5)

Feature

Package Include: 5pcs
Materies: lead free brass C69300(Import from Japan)
Net Weight: 85g/pc
Type: (Side x Side x Middle) PEX TEE
Thread : 1" x 1" x 1" PEX Tee

Description


Product Description
Durable and high standard brass crimp pex fitting. Commonly used to connect lines for air, water, fuel, oil and inert gases in a quick and simple way.
Click "honest-fly" to choose the product you want in our shop.


Features
- Package Include: 5pcs.
- Materies: lead free brass C69300(Import from Japan).
- Net Weight: 85g/pc.
- Type: (Side x Side x Middle) PEX TEE.
- Thread : 1" x 1" x 1" PEX Tee.


Important Note
Pay attention to the column of size and color, you could find a variety of product types and quantities for your choice.
The more your purchase the best price you get.


About Shipping
Great stock availability and fast dispatch are our core business. We would make effort to process each order within 24 hours no matter big or small.
We are international seller,China Post Air Mail and DHL Global Mail are our main carriers.
If you do not receive the item during this period or have any problems, kindly contact us firstly.


About Us
We are honest seller, any problems please contact us before leaving your feedback. We will try our best to work out the issue with you.
These products come from our joint factory, its annual output is about 100,000,000 pcs. It is one of the main copperware maker in China with a 25 years'experience in producing copperware and has already passed ISO 9001 quality guarantee system attestation, to ensure the long-term and stable quality of products.

3. 10 PIECES XFITTING 1" X 1" X 1" PEX TEE - BRASS CRIMP FITTINGS (LEAD-FREE BRASS) NSF, FULL PORT

Feature

XFITTING PEX Compatible with all types and brands of PEX Tubing - Watts, Everhot, Viega, Zurn, Nibco, Bow, etc.
Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.
Work with Crimp Connection System (PEX Crimp tool + Copper Crimp Rings) or Clamp Connection System (PEX Clamp tool + Stainless Steel PEX Clamps)
400 PSI, Approved to be used underground and behind walls without access panels
SAME/1 DAY HANDLING TIME, USING 2-3 DAYS FIRST CLASS MAIL W.TRACKING # AND INSURED

Description

XFITTING will give our customers 30 days to try out ours confident products, if some how you don't like it you can mail it back to us we will refund your money back with no question to ask, NO RESTOCKING FEES and even pay for your return shipping fees.

4. SharkBite U374LFA Plumbing Fitting, 1-Inch, Brass

Feature

INSTALLS IN SECONDS: 1 inch tee pipe connector requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal
COPPER, PEX, CPVC: SharkBite tee pipe connector plumbing fittings fits copper tubing, and CTS CPVC and PEX and connects all three types in any combination
COMPATIBLE PRODUCT: Same as part number U374LFZ and U374LF
QUALITY: Only SharkBite's quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection
CERTIFIED: SharkBite fittings are certified to 200 PSI and 200F and can be reused up to four times

Description

"

SharkBite 1 Inch Tee Pipe Connector
Connect pipe in seconds with relative ease using the SharkBite Push-To-Connect 1-Inch Tee Pipe Connector. The SharkBite plumbing fitting is the easiest way to join copper, CPVC, HDPE, or PEX pipe in any combination. With no soldering, clamps, glue required, its as simple as inserting the pipe into the fitting deep enough to be sealed by our specially-formulated O-ring. Once inserted, the stainless steel teeth bite down and grip the pipe. The SharkBite Straight Coupling Plumbing Fitting is designed for potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required.

CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal. No soldering, no clamps, no glue.
Our product works with your existing plumbing, is easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. Perfect for joining Copper, PEX, CPVC or PE-RT pipe, SharkBite is the no-fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.

"

5. Everflow Pushlock UPET1134 1 Inch x 1 Inch x 3/4 Inch Long Push Tees for Push-Fit Fittings, Made W/ Lead Free DZR Forged Brass, Connect PEX, CPVC and Copper, Pre-Lubricated Quick Installation

Feature

Connects PEX, CPVC, and COPPER Pipe in any Combination
Certified for Potable Water and Hydronic Applications
Instant Push-Fit Connection for Increased Ease-of-Use
1 Inch x 1 Inch x 3/4 Inch Long Push Tees, Made with Lead Free DZR Forged Brass
No Tools, No Heat, No Glue, No Flux and No Solder Required, EPDM O-Ring for Leak free Seals

Description

Everflow Pushlock 1 Inch x 1 inch x 3/4 inch push tees is the easiest plumbing fitting to join any combination of Copper, PEX, CPVC, pipe together. It features easy to disconnect and reconfigure the system with no soldering, clamps, unions or glue required, Its as simple as inserting the pipe into the fitting deep enough to be sealed by our specially-formulated O-ring, Coupling is removable and reusable installation. Once inserted, the stainless steel teeth bite down and grip the pipe. This push-to-connect fitting is designed for potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. It is rated up to 200 psi and 200°Fahrenheit.

SPECIFICATIONS & APPROVALS:

Certified to 200 PSI WOG and 200°F
Certified by UPC / IAPMO, To meet Lead-Free Potable Water Laws.
ANSI/NSF-14/G Compliant & AWWA C800 Compliant
Meets ASME B1.20.1, ASSE 1061
Manufactured in an ISO Accredited Facility

6. SharkBite UC412LFA10 3/4" x 1/2" Reducing Tee PEX Barb Fitting (10-Pack), Brass

Feature

Compatible with stainless steel clamp & Copper Crimp ring systems
Certified lead-free
Compatible with pex tubing
Resistant to corrosion due to dzr brass
Astm F1807 Nsf/Ansi 61 Nsf 372

Description

The SharkBite PEX barb reducing tee is made of a lead-free dzr brass and is an easy to install solution to connect to PEX tubing. SharkBite barbed fittings are compatible for potable water distribution and hydronic heating applications.

7. SharkBite UC362LFA10 1/2" Tee PEX Barb Fitting (10-Pack), Brass

Feature

Compatible with stainless steel clamp & Copper Crimp ring systems
Certified lead-free
Compatible with pex tubing
Resistant to corrosion due to dzr brass
Astm F1807 Nsf/Ansi 61 Nsf 372

Description

The SharkBite PEX barb tee is made of a lead-free dzr brass and is an easy to install solution to connect to PEX tubing. SharkBite barbed fittings are compatible for potable water distribution and hydronic heating applications.

8. 3 pack- 1 X 1 X 3/4 Pex Brass Tee-With 3/4 on Branch- Crimp No Lead

Feature

Compatible with all types and brands of PEX Type B or C Tubing: Watts; Everhot; Viega; Zurn; Nibco; Sharkbite; Bow; etc.
Compatible with the following connection systems: Crimp Connection System (PEX Crimp Tool + Copper Crimp Rings); Clamp (Cinch) Connection System (PEX Clamp Tool + Stainless Steel PEX Clamps)
Standards & Certifications: Manufactured to ASTM standard F1807

Description

Pex Crimp Style Brass Tee

9. Watts PEX LFP-1142 Tee 1-Inch x 1-Inch x 1/2-Inch Barb Low-Lead, Brass by Watts

Feature

Watts PEX LFP-1142 Tee 1-Inch x 1-Inch x 1/2-Inch Barb Low-Lead, Brass
1-inch by 1/2-inch

Description

Low Lead 1-Inch X 1-Inch X 1/2-Inch Brass Pex Tee;No soldering, no threading, and no waiting;Solid, leak-proof connection completed in a matter of seconds;Listed by the NSF International to NSF Standards 14 and 61 for use in potable water systems;Low lead brass is not more than a weighted average of 0.25% lead when used with respect to the wetted surfaces of pipes and pipe and plumbing fittings and fixtures

10. SharkBite UC370LFA10 3/4" Tee PEX Barb Fitting (10-Pack), Brass

Feature

Compatible with stainless steel clamp & Copper Crimp ring systems
Certified lead-free
Compatible with pex tubing
Resistant to corrosion due to dzr brass
Astm F1807 Nsf/Ansi 61 Nsf 372

Description

The SharkBite PEX barb tee is made of a lead-free dzr brass and is an easy to install solution to connect to PEX tubing. SharkBite barbed fittings are compatible for potable water distribution and hydronic heating applications.

Conclusion

By our suggestions above, we hope that you can found the best pex fittings tee 1 for you. Please don't forget to share your experience by comment in this post. Thank you!

You Might Also Like