Top 8 bearing housing 17mm bore

If you looking for bearing housing 17mm bore then you are right place. We are searching for the best bearing housing 17mm bore on the market and analyze these products to provide you the best choice.

Best bearing housing 17mm bore

Product Features Editor's score Go to site
uxcell 2pcs KP003 17mm Bore Zinc Alloy Inner Ball Mounted Pillow Block Insert Bearing uxcell 2pcs KP003 17mm Bore Zinc Alloy Inner Ball Mounted Pillow Block Insert Bearing
Go to amazon.com
uxcell UCP203 Pillow Block Bearing, 17mm Bore Diameter, Cast Iron/Chrome Steel, Set Screw Lock (Psck of 1) uxcell UCP203 Pillow Block Bearing, 17mm Bore Diameter, Cast Iron/Chrome Steel, Set Screw Lock (Psck of 1)
Go to amazon.com
uxcell KFL003 Flanged Pillow Block Bearing, 17mm Bore Diameter, Zinc Alloy/Chrome Steel, Set Screw Lock (Pack of 2) uxcell KFL003 Flanged Pillow Block Bearing, 17mm Bore Diameter, Zinc Alloy/Chrome Steel, Set Screw Lock (Pack of 2)
Go to amazon.com
uxcell KP003 Pillow Block Bearing, 17mm Bore Diameter, Zinc Alloy/Chrome Steel, Set Screw Lock (Pack of 2) uxcell KP003 Pillow Block Bearing, 17mm Bore Diameter, Zinc Alloy/Chrome Steel, Set Screw Lock (Pack of 2)
Go to amazon.com
Ball pillow block bearing SSUCP 203 bore 17mm housing and bearing stainless steel Ball pillow block bearing SSUCP 203 bore 17mm housing and bearing stainless steel
Go to amazon.com
uxcell UCF203 Square Flanged Pillow Block Bearing, 17mm Bore Diameter, Cast Iron/Chrome Steel, Set Screw Lock (Pack of 2) uxcell UCF203 Square Flanged Pillow Block Bearing, 17mm Bore Diameter, Cast Iron/Chrome Steel, Set Screw Lock (Pack of 2)
Go to amazon.com
Sydien 17mm ID Bore Micro Vertical Pillow Block Bearing Zinc Alloy 4 Pcs (17mm) Sydien 17mm ID Bore Micro Vertical Pillow Block Bearing Zinc Alloy 4 Pcs (17mm)
Go to amazon.com
Ball flange bearing SSUCFL 203 bore 17mm housing and bearing stainless steel Ball flange bearing SSUCFL 203 bore 17mm housing and bearing stainless steel
Go to amazon.com
Related posts:

1. uxcell 2pcs KP003 17mm Bore Zinc Alloy Inner Ball Mounted Pillow Block Insert Bearing

Feature

SIZE:KP003 17mm Bore Diameter,Pillow Block Bearing Flange
FEATURES:This Bearing is a self-aligning, pillow block bearing
MATERIAL:Zinc Alloy Rhombic Flanged Base, rust-proof, durable, have long Life
APPLICATION:Pillow Block Bearing Flange Block Bearing is widely used in various of machinery
NOTE:Can be used into conveyering systems, film processing machinery

Description

1.17mm Bore Diameter KP003 Pillow Block Bearing Flange.
2.Zinc AlloyFlanged Base, rust-proof, durable, havelong Life.
3.This Bearing is a self-aligning, pillow block bearing, you can adjust or replace the bearing easily.
4.This one-piece pillow block housing allows for a stationary outer ring and rotating inner ring.
5.Pillow Block Bearing Flange Block Bearing is widely used in various of machinery, especially in food machine.
6.They also can be used into conveyering systems, film processing machinery, spin machine, printing machiner.

Specifications
Product Name: Pillow Block Bearing
Package Content: 2pcs x Pillow Block Bearing
Material: Zinc Alloy, Bearing Steel
Color: Gray
Weight:262g
Model: KP003
Overall Size:85(+/-1)x 18(+/-1) x 45(+/-1)mm/3.3-inch x 0.7-inch x 1.8-inch(L*W*H)
Bearing Inner Dia.: 17mm/0.67-inch
Mounting Hole Diameter: 7mm/0.28-inch
Mounting Hole Distance: 67mm/2.6-inch

2. uxcell UCP203 Pillow Block Bearing, 17mm Bore Diameter, Cast Iron/Chrome Steel, Set Screw Lock (Psck of 1)

Feature

Beaging Unit No.: UCP203 (Bearing No.: UC203, Housing No.: P203, Bore Dia.: 17mm)
Chromium Steel insert bearing, long-life, smooth and low noise
Two-bolt Mounted Pillow Block Bearing. Cast Iron housing, rust-proof and durable
Self-alignment bearing can correct its own alignment once it begins to rotate
Designed for mounting onto surfaces parallel to the shaft axis

Description

1.A pillow block contains a housing and an double sealed insert self-alignment bearing that avoid any misalignment.
2.Bearing housings are made of Cast Iron while bearings are made of Chromium Steel (GCr15), giving them low friction, vibration and noise.
3.Pillow block Bearings have two bolt holes for installation. It is easy to replace.
4.The set screws enable the shaft to be fixed to the inner ring of the bearing and preventing slippage. The size of inner hex wrench is recommended below.


Specification:
Bearing Unit No.: UCP203
Bearing No.: UC203
Housing No.: P203
Housing Meterial: Cast Iron
Bearing Meterial: Chromium Steel (GCr15)
Bore Diameter: 12mm
Bolt Hole Size: 17 x 12mm / 0.67 Inch x 0.47 Inch (L*W)
Holes Centre Distance: 96mm / 3.78 Inch
Recommend Mounting Bolt Size: M10
Recommend Wrench Size: 2.5mm
Number of Pack: 1 Pcs

3. uxcell KFL003 Flanged Pillow Block Bearing, 17mm Bore Diameter, Zinc Alloy/Chrome Steel, Set Screw Lock (Pack of 2)

Feature

Beaging Unit No.: KFL003 (Bearing No.: K003 , Housing No.: FL003 , Bore Dia.: 17mm)
Chromium Steel insert bearing, long-life, smooth and low noise
Two-bolt Mounted Pillow Block Bearing. Zinc Alloy housing, rust-proof and durable
Self-alignment bearing can correct its own alignment once it begins to rotate
Designed for mounting onto surfaces vertical to the shaft axis

Description

1.A pillow block contains a housing and an double sealed insert self-alignment bearing that avoid any misalignment.
2.Bearing housings are made of Zinc Alloy while bearings are made of Chromium Steel (GCr15), giving them low friction, vibration and noise.
3.Pillow block Bearings have two bolt holes for installation. It is easy to replace.
4.The set screws enable the shaft to be fixed to the inner ring of the bearing and preventing slippage. The size of inner hex wrench is recommended below.


Specification:
Bearing Unit No.: KFL003
Bearing No.: K003
Housing No.: FL003
Housing Meterial: Zinc Alloy
Bearing Meterial: Chromium Steel (GCr15)
Bore Diameter: 17mm
Bolt Hole Size: 7mm / 0.28 Inch (D)
Holes Centre Distance: 56mm / 2.2 Inch
Recommend Mounting Bolt Size: M6
Recommend Wrench Size: 1.5mm
Number of Pack: 2 Pcs

4. uxcell KP003 Pillow Block Bearing, 17mm Bore Diameter, Zinc Alloy/Chrome Steel, Set Screw Lock (Pack of 2)

Feature

Beaging Unit No.: KP003 (Bearing No.: K003, Housing No.: P003, Bore Dia.: 17mm)
Chromium Steel insert bearing, long-life, smooth and low noise
Two-bolt Mounted Pillow Block Bearing. Zinc Alloy housing, rust-proof and durable
Self-alignment bearing can correct its own alignment once it begins to rotate
Designed for mounting onto surfaces parallel to the shaft axis

Description

1.A pillow block contains a housing and an double sealed insert self-alignment bearing that avoid any misalignment.
2.Bearing housings are made of Zinc Alloy while Bearings are made of Chromium Steel (GCr15), giving them low friction, vibration and noise.
3.Pillow block Bearings have two bolt holes for installation. It is easy to replace.
4.The set screws enable the shaft to be fixed to the inner ring of the bearing and preventing slippage. The size of inner hex wrench is recommended below.


Specification:
Bearing Unit No.: KP003
Bearing No.: K003
Housing No.: P003
Housing Meterial: Zinc Alloy
Bearing Meterial: Chromium Steel (GCr15)
Bore Diameter: 17mm
Bolt Hole Diameter: 7mm / 0.28 Inch
Holes Centre Distance: 67mm / 2.64 Inch
Recommend Mounting Bolt Size: M6
Recommend Wrench Size: 2mm
Number of Pack: 2 Pcs

5. Ball pillow block bearing SSUCP 203 bore 17mm housing and bearing stainless steel

Feature

Material: Housing: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainles

Description

Material: Housing: Stainless
steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel
1.4125 (X105CrMo17, AISI 440 C).

The rolling bearing can be
swiveled when mounting to compensate shaft misalignement.
The shaft will get fastened with 2 setscrews.
Lubricated for life at normal operating
conditions. Re-lubricating is possible.

Delivery with stainless steel grease nipple.
Type203
Bore [mm]17
h [mm]30,2
a [mm]127
e [mm]95
b [mm]38
s1 [mm]13
s2 [mm]19
g [mm]15
w [mm]62
L uc [mm]31
n uc [mm]12,7
Bearing Load Rating dyn. C [kp]12,8
Bearing Load Rating stat. Co [kp]6,7
Weight [kg]0,81

6. uxcell UCF203 Square Flanged Pillow Block Bearing, 17mm Bore Diameter, Cast Iron/Chrome Steel, Set Screw Lock (Pack of 2)

Feature

Beaging Unit No.: UCF203 (Bearing No.: UC203, Housing No.: F203, Bore Dia.: 17mm)
Chromium Steel insert bearing, long-life, smooth and low noise
Four-bolt Mounted Pillow Block Bearing. Cast Iron housing, rust-proof and durable
Self-alignment bearing can correct its own alignment once it begins to rotate
Designed for mounting onto surfaces vertical to the shaft axis

Description

1.A pillow block contains a housing and an double sealed insert self-alignment bearing that avoid any misalignment.
2.Bearing housings are made of Cast Iron while bearings are made of Chromium Steel (GCr15), giving them low friction, vibration and noise.
3.Pillow block Bearings have two bolt holes for installation. It is easy to replace.
4.The set screws enable the shaft to be fixed to the inner ring of the bearing and preventing slippage. The size of inner hex wrench is recommended below.


Specification:
Bearing Unit No.: UCF203
Bearing No.: UC203
Housing No.: F203
Housing Meterial: Cast Iron
Bearing Meterial: Chromium Steel (GCr15)
Bore Diameter: 17mm
Bolt Hole Size: 12mm / 0.47 Inch (D)
Holes Centre Diagonal Distance: 75.5mm / 2.97 Inch
Recommend Mounting Bolt Size: M10
Recommend Wrench Size: 2.5mm
Number of Pack: 2 Pcs

7. Sydien 17mm ID Bore Micro Vertical Pillow Block Bearing Zinc Alloy 4 Pcs (17mm)

Feature

Overall size of pillow block bearing : 85 x 18 x48mm /3.35"x 0.7"x 1.89"(L*W*H);Mounting Hole Diameter:17mm/0.67"
Setscrew locking collar for secure attachment to guided shaft.
Two-bolt housing with ball bearing insert for ready-to-mount installation.
This Bearing is a self-aligning, pillow block bearing, you can adjust or replace the bearing easily.
Pillow Block Flange Bearing is widely used in various of machinery, such as machinery and equipment, conveyors, machine manufacturing, ect.

Description

Pillow Block Bearing Flange Block Bearing is widely used in various of machinery, especially in food machine.
They also can be used into conveyering systems, film processing machinery, spin machine, printing machiner.

8. Ball flange bearing SSUCFL 203 bore 17mm housing and bearing stainless steel

Feature

Material: Housing: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainle

Description


Material: Housing: Stainless steel 1.4305 (X5CrNi18-10, AISI
304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C).
With
2 mounting holes.
The rolling bearing can be swiveled when mounting
to compensate shaft misalignement.
The shaft will get fastened with 2
setscrews. Lubricated for life at normal operating conditions.
Re-lubricating is possible.
Delivery with stainless steel grease
nipple.

Type203
Bore [mm]17
a [mm]113
b [mm]60
e [mm]90
i [mm]15
g [mm]12
l [mm]25,5
s [mm]12
Z uc [mm]33,3
n uc [mm]12,7
Bearing Load Rating dyn. C [kp]12,8
Bearing Load Rating stat. Co [kp]6,7
Weight [kg]0,67

Conclusion

All above are our suggestions for bearing housing 17mm bore. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using bearing housing 17mm bore with us by comment in this post. Thank you!

You Might Also Like