When you want to find 2005 jeep liberty tail light cover, you may need to consider between many choices. Finding the best 2005 jeep liberty tail light cover is not an easy task. In this post, we create a very short list about top 10 the best 2005 jeep liberty tail light cover for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 2005 jeep liberty tail light cover:
Best 2005 jeep liberty tail light cover
1. Partsam 2x Red/White 39 LED Stop Turn Tail Stud Lights Replacement for Jeep CJ YJ JK Truck Trailer Boat RV, Hardwired
Feature
Each one is equiped with 39 Super bright LEDs: 12 Red LED as Stop Turn Tail Lights, 21 White LED as Reverse Lights, 6 White LED as License Plate illuminator.Universal for 12V vehicles like Truck, Trailer, Boat, bus, Lorry, Van, etc. Also suitable for Jeep YJ JK Wrangler, Jeep CJ CJ-7 ( NOT factory Jeep light )
Partsam Lights are impact resistant and less susceptible to shock damage; Each LED is directly wired and water-tight sealed.
Size: 170mm x 145mm x 60mm (6.7'' x 5.7'' x 2.4''); Wire Length: 150mm (6'')
Wire Connection Tips: Black Wire is the Ground; White Wire,Red 12 LED works with low brightness as Tail Light and bottom white 6 LED works as License Plate Light; Yellow Wire,White 21 LED on the upside Works as Reverse Light; Red Wire,Red 12 LED works with high brightness as Brake/Turn Light;Please note this one is NOT plug and play, we need make the wire connect,because this one never come with the plug, just come with the wires
Description
Partsam offers an extensive line of high quality marker lights for car, truck, trailer, boat, bus, lorry, van, caravan, camper, RV, etc. You can find all the marker lights you need in Partsam!Partsam (2) Red LED Stud Mount Combination Lights with Stop/Turn/Tail Lights, White LED Reverse and License Plate Lights for Truck Trailer Boat Jeep TJ CJ YJ JK.
Features and Specs:
LED 5.5inch Universal Stud Mount Combination Tail Light.
LED Quantity: 39 LED (12 Red LED as Stop Turn Tail Lights, 21 White LED as Reverse Lights,6 White LED as License Plate Lights)
Stud Mount Installation.
DOT approved.
12 Volt or 24 Volt Input.
Size: 170mm x 145mm x 60mm (6.7'' x 5.7'' x 2.4'')
Wire Length: 150mm (6'')
These Lights are impact resistant and less susceptible to shock damage. Each LED is directly wired and water-tight sealed.
These LEDs draw less current, generate less heat and are brighter and light faster than an incandescent bulb.
Wire Connection Tips:
1. Black Wire is the Ground
2. White Wire, Red 12 LED works with low brightness as Tail Light and bottom white 6 LED works as License Plate Light.
3. Yellow Wire, White 21 LED on the upside Works as Reverse Light.
4. Red Wire, Red 12 LED works with high brightness as Brake/Turn Light.
2. Nilight - TL-10 2PCS 16 11 LED Red Trailer Light Bar for Park Stop Turn signals Tail Brake Light DOT Compliant IP65 Waterproof Truck Trailer Marker ID Bar, 2 Years Warranty
Feature
Multi-functions Each light has 11 high quality LED outputs high brightness and low brightness Can functions perfectly as parking light stop light turn signal light tail light and brake lightHighly Sealed & durable The front Polycarbonate lens is sonically welded to the housing and the back wire lead is add on glue to make sure the light is completely sealed Waterproof enough to withstand all weather abuse!
Light Bar Mounting To flush-mounting the light one option is to drill a center hole or use the existing hole to go through the back wire lead and then fix the two ends by drilling in the two screws provided The other option is to add some washer when fixing the two ends or use a bracket to mount the light to avoid drilling holes for the back wire lead
Wide Application Can be perfectly used on most 12V heavy duty trucks semi trailers cargo trailers boat trailers travel trailers horse trailers RV camper work vehicles etc Package Include 2PCS trailer marker ID bar with 2 hardware pack
Easy Wire Connection For wire connection white wire for ground black wire for low brightness tail light and red wire for high brightness brake light
3. Nilight TL-11 1PC Red 9 LED ID Bar Marker Tail Black Stainless Steel Bracket for Truck Trailer Boat Identification Light, 2 Years Warranty
Feature
Enhanced Visibility & Safety: For your trailer 80 or wider that requires identification light, the ID bar marker light mounted on the top or between the taillights draws extra visibility for the wide range, makes the light more eye-catching to warn the upcoming car. Enhance your on-road safety!Top LED Quality: 9 upgraded Piranha LED, which feature wider lighting angle, higher intensity light, and better heat dissipation, are used on the trailer light to make it very durable and output bright light without glare.
Ready For All Weather Abuse: IP67 waterproof sonically welded light housing, durable ABS cover and the anti-corrosion black base bracket, make the light well protected to withstand all weather abuse.
Considerate Design for You: Comes with 2 wire lead for straight forward electrical connection, red wire for positive, black wire for negative. Mounting bracket also features notches and carefully added glue at the back for easy wire routing and perfect surface mounting.
Universal for any 12V vehicles more than 80 wide like trucks, pickups, travel trailer, boat trailer, horse trailer, camper trailer, cargo trailer, RV, SUV motorhome etc. Package Include: 1x trailer light bar, 1x hardware pack
4. GOOACC 425 Pcs Car Body Retainer Clips Set Tailgate Handle Rod Clip & Fastener Remover - 19 Most Popular Sizes Auto Push Pin Rivets Set -Door Trim Panel Clips for GM Ford Toyota Honda Chrysler
Feature
WORKS FOR ALMOST ALL SITUATIONS- The kit contains 19 types of most common sizes of fastener clips, cover 6mm to 10mm hole sizes replacement for Ford, GM, Chrysler, Toyota, Nissan, Mazda, Jeep, 2001 MR2 Spyder, 06 350z1996 Ford F-250, motorcycles, Honda , Chevy Silverado. But NOT ONLY for these cars, if the sizes and shape meet your needs well, it's also a useful kit.IMPACT RESISTANT PUSH RIVETS - Well made of durable Nylon plastic, not easy to break or crack like other brands, it is super sturdy!
PREFECT FOR WHAT YOU NEED - Up to 425 pieces of retainer clips in a plastic box, allows to freely DIY your vehicle accessories at anytime you wanted.
BONUS FASTENER REMOVER - Allow you to quickly and easily remove car door panel and upholstery clips without causing damage to them. Easy access into confined areas.
WIDELY APPLICATION- Theses push clips are widely used for trim panel clips, door trim clips, door panel clips, bumper clips, Fender clips, engine cover and splash shield retainers replacement. It always covers some applications include telecom equipment, motor vehicles, domestic appliances, furniture and electrical equipment.
5. 2 Pieces 10 Inch 15 LED Trailer Tail Light Bar Stop Turn Tail Lights Assembly Third Brake Strip 9 to 30-volt Trailer Identification Light for Marine Boats Trucks Pickups (Red Cover)
Feature
Package includes:two LED lights, four screws and four screw caps. You don't need to prepare other accessories for installing this lightGood quality:using IP67 waterproof material, can ensure the normal use in rainy and humid environment, at the same time, it has quality shockproof and dustproof function, can protect LED lamp from sand and rain, even in bad weather and environment, they can also provide you with reliable lighting
Easy to install: white wire - ground; Red Wire - high brightness; Brown Wire - low brightness. Package Included: 2x LED Tail Light,4x Screws,4x Screws Caps
Wide applied: It can be widely applied in most types of heavy trucks, semi trailers, cargo trailers, marine trailers, working vehicles and other land vehicles requiring rated lighting
ApplicationIt is suitable for marker, nice replacement light, stop brake light, side marker light, indicator light, turn light, clearance light, real light, roof light, grill light, identification light, real bumper lights, auxiliary driving lights, etc
6. Yorkim 3157 LED Bulb 2880 lumens 3156 LED Reverse Lights 3057 LED Tail Light Brake Light 4114 LED Day Running Light 3057 3056 3457 led Replacement bulb for Turn Signal Reverse Lights, 6000K White
Feature
Bright 3157 LedYorkim 3157 led bulb is built with 24 pcs high power 2835 led chips on multiple sides with HD glass projector to deliver a 2880 Lumens Per Set, provides a stronger light penetration for better lighting experienceGreat Heat DissipationYorkim 3157 led bulb is assembled with aluminum circuit board, grade aviation aluminum body & uneven surface for faster heat dissipation, built-in upgraded smart IC driver ensure the led bulb to work under a safe temperature range, lifespan can be up to 50,000 hours
SpecificationEach package contains 2pcs 3157 led bulb. Voltage: 12V, Color: 6000K Xenon White, Power: 4W per bulb, Lumen: 1440 Lumens/bulb, Dimensions: 2.20*0.78inch. Canbus error free for more than 95% vehicles, but a 50w 6ohm load resistor or flasher relay may be needed to prevent the hyper flash or the bulb does not blink for vehicles with built-in canbus system
Quick installationNo polar design, fit in standard 3157 or 3156 socket, just remove the original bulb and insert this 3157 LED bulb, plug and play in 10 minutes, no different than installing a normal bulb
FitmentYorkim 3157 led bulb fits for 3157, 3056, 3156, 3047, 3057, 3457, 4057, 4114, 3156NA, 3156A, 3057A, 3157A, 3157NA, 3457A, 3457K, 3457NA, 5702 ect, replacement for Brake Lights, Turn Signal Lights, Reverse Back Up Lights, Tail Lights, Parking Lights, Side Marker Lights, Daytime Running Lights etc
7. Nilight - TL-08 6 Inch Oval Amber LED Trailer Tail Lights 2PCS 10 LED W/Flush Mount Grommets Plugs IP67 Waterproof Turn Signals Trailer Lights for RV Truck Jeep, 2 Years Warranty
Feature
Awesome Brightness: Each light has 10 PCS high-quality SMD LEDs to output super bright amber light, high brightness of turn signal light, low brightness for Taillight, improving visibility and ensuring you a safer night.Easy Installation: Comes with grommets for surface mount, also added a 3-prong watertight plug with attached wire. For installation, you just need to surface mount the grommets & light setup, and then connect the 3 wires to the corresponding wires on vehicles. Hole size for surface mount is: 6. 6 x2. 5 x 1. 75
Upgraded Unique Design: Light has unique ears on its two sides, upgrade notches on the inside of the grommet, and a tighter attaching ability between the 3-prong plug and it. These help the light fit perfectly and firmly on the grommet, and the 3-prong plug attaches tightly to the light. Shake proof, there will be no worries of loosing light or wires.
Ready For The Weather: Be highly silicon sealed, IP67 waterproof rating, always be ready for different kinds of weather attack.
Universal Application: Work on a 12 V DC system, function as left turn signals right turn signals light, tail light for all kinds of trucks, trailers, tractors, semi-trailer, horse trailer, travel trailer, dump Truck, special vehicle, etc. Just make sure the hole size before you purchase.
8. Nilight 10PCS 3.8 Inch 6 LED Red Side Marker Light Indicator Light Rear side Marker Light for Truck Trailer RV Cab Boat Bus Lorry LED Marker Light Clearance Light, 2 Years Warranty (TL-15)
Feature
Excellent Brightness: Each light comes with 6PCS high intensity 2835 SMD LED, outputs excellent bright 120LM light for perfect marker lightAwesome Seal: Decently sealed at both front lens and back wire lead. Compared with other brands, Our back wire lead is added proper glue to make it completely seal without affecting the surface mount
3 steps of light mounting: Mark and drill holes according to the foam tape base provided; Peel and stick the foam tape to the light; Run through the wire lead to the center hole and use bolts and nuts to fix 2 sides. Center hole might not be necessary if used some washer under the foam tape base when fixing the two sides
Widely Used: Ideal for most 12V trailer, buses, trucks, trailers, lorries, RV, boat as LED marker light clearance light indicator Light
Package Includes: 10 Pack of red side marker light, include a hardware pack and foam tape base
Fit type: Universal Fit
9. ZEEZ Vinyl - 50% Dark Smoke Black-Out Vinyl Headlight Taillight Tints
Feature
Color: 50% Dark Smoke Black-OutSelf-adhesive, peel and stick
Stretchable with heat
Water resistant
Easy removal with no residual
10. Nilight - TL-01 6" Oval Red LED Tail 2PCS w/Surface Mount Grommets Plugs IP65 Waterproof Stop Brake Turn Trailer Lights for RV Truck Jeep, 2 Years Warranty
Feature
Awesome Brightness: Each tail light has 10 PCS high-quality SMD LEDs to output super bright red light, high brightness of Turn/Brake light, low brightness for Taillight, improving visibility and ensuring you a safer night.Easy Installation: The taillight comes with grommets for surface mount, also added a 3-prong watertight plug with attached wire. For installation, you just need to surface mount the grommets & light setup, and then connect the 3 wires to the corresponding wires on vehicles. Hole size for surface mount is: 6. 6 x2. 5 x 1. 75
Upgraded Unique Design: Niligh's tail light has unique ears on its two sides, upgrade notches on the inside of grommet, and a tighter attaching ability between 3-prong plug and it. These help the light fit perfectly and firmly on the grommet, and the 3-prong plug attaches tightly on the light. Shake proof, there will be no worries of loosing light or wires
Ready For The Weather: Be highly silicon sealed, IP67 waterproof rating, always be ready for different kinds of weather attack
Universal Application: Work on a 12 V DC system, function as turn/Brake light, tail light for all kinds of trucks, trailers, tractors, semi-trailer, horse trailer, travel trailer, dump Truck, special vehicle, etc. Just make sure the hole size before you purchase.
Fit Type: Universal Fit
