When it comes to choosing your abrasive saw blade, there are hundreds of different choices. In our review, weve considered all the various features youll need to know before buying the best abrasive saw blade. We hope that through this article, with our comparison table, in-detail review of each product can help you decide which one is your best abrasive saw blade.

Best abrasive saw blade

Product	Features	Editor's score	Go to site
	IVY Classic 40088 Swift Cut 10-Inch x 3/32-Inch x 5/8-Inch Arbor, Metal Cut-Off Blade for Chop Saws, 1-Piece		Go to amazon.com
	IRWIN Tools Metal-Cutting Circular Saw Blade, 10-inch, 80T (4935561)		Go to amazon.com
	Oshlun SBF-100052 10-Inch 52 Tooth TCG Saw Blade with 1-Inch Arbor (5/8-Inch Bushing) for Mild Steel and Ferrous Metals		Go to amazon.com
	DeWalt DW8005 10 x 7/64 x 5/8 General Purpose Metal Chop Saw Wheel		Go to amazon.com
	DEWALT DW3521B5 7-Inch High Performance Masonry Cutting Abrasive Saw Blades, 5-Pack		Go to amazon.com
	DEWALT Cutting Wheel for Chop Saw, Metal Cutting, 14-Inch (DW8001B4)		Go to amazon.com
	DEWALT 7-Inch Metal Cutting Blade, 5-Pack (DW3511B5)		Go to amazon.com
	Freud-Diablo 10 X 50 X 1 Ferrous CERMET CSB, Multi, One Size (D1050CF)		Go to amazon.com
	10" 52 Tooth TCT Saw Blade for Thin Steel & Ferrous Metals		Go to amazon.com
	Mercer Industries 600040 Stationary Saw Cut-Off Wheels for Metal, 10" x 1/8" x 5/8" (10 Pack)		Go to amazon.com

Related posts:

1. IVY Classic 40088 Swift Cut 10-Inch x 3/32-Inch x 5/8-Inch Arbor, Metal Cut-Off Blade for Chop Saws, 1-Piece

Feature

Designed to cut steel, angle iron, sheet metal and other ferrous metal products, Do not use on High Speed Saws, Swift Cut (Registered Trademark)
Resin bonded Aluminum-Oxide grain for faster cutting, Type 1 blade - for cutting only
Blade double reinforced with fiberglass mesh for durability and safety
Arbor reinforced with metal for extra strength
Diameter: 10-inch, Width: 3/32-inch, Arbor: 5/8-inch, Max RPM: 6,100

Description

IVY Classic Industries is dedicated to producing a comprehensive, quality line of power tool accessories and hand tools. IVY Classic Swift Cut Metal Cut-Off Blades are constructed out of resin bonded aluminum-oxide grain which enables faster cutting of steel, angle iron, sheet metal and other ferrous metal products. The blades feature double reinforced fiberglass mesh for durability and safety and metal reinforced arbors for extra strength. IVY Classic products: 40088, 40106 and 40108 are designed for use with chop saws.

2. IRWIN Tools Metal-Cutting Circular Saw Blade, 10-inch, 80T (4935561)

Feature

Laser-cut blades and anti-vibration vents keep the blade cool for smooth and accurate cuts
Metal cutting-grade carbide teeth withstand impact, reduce wear, and deliver longer blade life
Cuts the metal instead of grinding it like abrasive wheels, so the finished product is smoother and cooler to the touch
The metal cutting blades also last significantly longer than abrasive wheels making the cost per cut lower

Description

Laser-cut blades and anti-vibration vents keep the blade cool for smooth and accurate cuts. Metal cutting-grade carbide teeth withstand impact, reduce wear, and deliver longer blade life. Cuts the metal instead of grinding it like abrasive wheels, so the finished product is smoother and cooler to the touch. The metal cutting blades also last significantly longer than abrasive wheels making the cost per cut lower. IRWIN Tools Metal-Cutting Circular Saw Blade, 10-inch, 80T (4935561)

3. Oshlun SBF-100052 10-Inch 52 Tooth TCG Saw Blade with 1-Inch Arbor (5/8-Inch Bushing) for Mild Steel and Ferrous Metals

Feature

Fits: Evolution Rage3 and miter saws
Max RPM: 5,200
Triple chip tooth grind
Professional grade C-6 carbide
Laser cut expansion slots

Description

Our ferrous metal blades have been designed with a durable carbide grade and triple chip tooth grind which ensures an extended cutting life of all types of ferrous metals (mild steel) such as steel studs, angle iron, pipe, rebar, channel, flat stock and more. They can also be used for cutting non ferrous metals such as aluminum, copper and brass. The specially formulated C-6 micro grain carbide with titanium lasts longer and leaves a burr free cut with little to no sparks or dust, which are common when using abrasives. They can cut 5 to 10 times faster and last up to 30 times longer than abrasives, allowing fewer blade changes and increased production. The higher tooth count blades are better suited for thinner materials, while the lower tooth count blades are better for thicker materials. WARNING: Not recommended for cutting hardened materials. Never use on saws that run above the rated Max RPM. Proper clamping devices should be employed.

4. DeWalt DW8005 10 x 7/64 x 5/8 General Purpose Metal Chop Saw Wheel

Feature

Dewalt Chop Saw Wheel 10 DW8005

Description

The construction features double reinforced wheel with two full sheets of fiberglass for safety and performance. Material composition of the wheel consists of a premium grain for added wheel life and speed. The chop saw wheel includes enhanced formulations which provide longer life and optimal performance. DEWALT inspects the high quality resin bonds for 100-percent quality before sale for product consistency and quality.

5. DEWALT DW3521B5 7-Inch High Performance Masonry Cutting Abrasive Saw Blades, 5-Pack

Feature

Premium silicon carbide grain for long life and fast cutting
Proprietary material mix ensures durable long life wheels
2 full sheets of fiberglass for durability and safety
Diamond knockout arbor for use with worm drive saws
Heavy duty cutting of concrete and other masonry materials

6. DEWALT Cutting Wheel for Chop Saw, Metal Cutting, 14-Inch (DW8001B4)

Feature

High performance aluminum oxide grain for long life and fast cutting
High grain concentration for agressive cutting action and smoother running wheels
Proprietary material mix ensures durable long life wheels
2 full sheets of fiberglass for durability and safety

7. DEWALT 7-Inch Metal Cutting Blade, 5-Pack (DW3511B5)

Feature

Aluminum oxide grain for long life and fast cutting
Proprietary material mix ensures durable long life wheels
2 full sheets of fiberglass for durability and safety
Diamond knockout arbor for use with worm drive saws
High performance cutting of carbon steel and other ferrous metals

8. Freud-Diablo 10 X 50 X 1 Ferrous CERMET CSB, Multi, One Size (D1050CF)

Feature

10 X 50 X 1 FERROUS CERMET CSB
10 X 50 X 1 FERROUS CERMET CSB
10 X 50 X 1 FERROUS CERMET CSB
10 X 50 X 1 FERROUS CERMET CSB
10 X 50 X 1 FERROUS CERMET CSB

9. 10" 52 Tooth TCT Saw Blade for Thin Steel & Ferrous Metals

Feature

Benchmark Abrasives blades have been designed to maximize performance on thin/mild steel and other ferrous metals.
Material applications include square tube, angle iron, thin steel plate, pipe, tube, rebar, flat stock and other ferrous metals.
Do not exceed an RPM of 5,200.
Arbor - 1" with 5/8" bushing
52 Carbide Teeth

10. Mercer Industries 600040 Stationary Saw Cut-Off Wheels for Metal, 10" x 1/8" x 5/8" (10 Pack)

Feature

Use on stationary saws. Max RPMs 6, 100
Used to cut ferrous metals including steel, structural steel, rebar, iron pipe, bar stock and metal tubing
Sharp aluminum oxide grain for quick cutting
Double reinforced for safety
Metal reinforced arbor

Conclusion

All above are our suggestions for abrasive saw blade. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using abrasive saw blade with us by comment in this post. Thank you!