It’s not that easy to choose the right arduino rfid sensor since there’s a ton of things you need to consider first. Some of the factors we paid attention to in our evaluation when reviewing the top arduino rfid sensor on the market. Through our research, weve looked through catalogues to pick out the very best for you. Through our comparison table, in-detail reviews of each product, were going to reveal the name of our best arduino rfid sensor on the marketbut dont skip to the end!
Best arduino rfid sensor
1. HiLetgo RFID Kit - Mifare RC522 RF IC Card Sensor Module + S50 Blank Card + Key Ring for Arduino Raspberry Pi
Feature
The MF522-AN module design the circuit of card read by using the original Philips MFRC522 chip.Easy to use, low cost, and applicable to equipment development and card reader development etc.
Applicable for the user who need to design or manufacture the RF card terminal.
The module can be directly loaded into the various reader molds.
The module use a voltage of 3.3V, it can connected communication with user's any CPU mainboard through several lines of SPI interface, it can ensure stable and reliable work, and reader distance.
2. SparkFun Simultaneous RFID Reader - M6E Nano Long distance UHF sensor shield Write tags at 80msec standard Read up to 150 tags/sec to 96-bit EPC
Feature
The SparkFun Simultaneous RFID Reader is an Arduino-compatible board to get you started with the M6E Nano UHF RFID ReaderRadio Frequency Identification (RFID) is becoming popular everywhere for tracking practically everything
Whether you want to get started by adding an RFID reader on your toolbox with tags on all your tools or allowing access to the tree house for your secret society meetings, this board may be for you!
You can also connect directly to your computer using the FTDI header on the board and read data using the Universal Reader Assistant, or a different microcontroller
With the correct antenna you can read up to 16 feet (4.9m), or 1 to 2 feet with the onboard antenna
3. IZOKEE Card Reader Module for RFID RC522 with S50 13.56MHz Smart Card Chip Key Ring for Arduino for Raspberry Pi (1 Set)
Feature
This Card Reader module is based on the MF522-AN board and is delivered together with an S50 card, 6 blue key Ring and two matching pin strips.It is applicable for the users who need to design or manufacture the RF card terminal, for example, the development of access controls, electronic door locks or terminals for the time recording.
It is compatible with Mifare1 S50, Mifare1 S70, MIFARE Ultralight, Mifare Pro, and MIFARE DESFire.
This module can be directly loaded into the various reader molds. It is compatible with Arduino, Raspberry Pi and micro-controller.
The module uses a voltage of 3.3V. It can be connected communication with user's any CPU main-board through several lines of SPI interface; it can ensure stable and reliable work, and reader distance.
4. FTCBlock RFID Kit - Mifare RC522 RF IC Card Sensor Module + S50 Blank Card + Key Ring for Arduino Raspberry Pi
Feature
The MF522-AN module design the circuit of card read by using the original Philips MFRC522 chip.Easy to use, low cost, and applicable to equipment development and card reader development etc.
Applicable for the user who need to design or manufacture the RF card terminal.
The module can be directly loaded into the various reader molds.The module use a voltage of 3.3V, it can connected communication with user's any CPU mainboard through several lines of SPI interface, it can ensure stable and reliable work, and reader distance.
If there are any issues with the product ,please contact us without hesitation.We will take care of the issues in time.
5. WMYCONGCONG 3 PCS RC522 RFID Kit Including RF IC Card Sensor Module S50 White Card Key Ring for Arduino Raspberry Pi
Feature
Supported Card Types: used for Mifare1 S50, Mifare1 S70, Mifare Pro, and MIFARE DESFire.Easy to use, low cost, and applicable to equipment development and card reader development etc.
The module adopts a voltage of 3.3V, can directly connect with any CPU motherboard of the user through several simple lines of the SPI interface, which can ensure stable and reliable operation of the module and long reading distance.
It is applicable for the users who need to design or manufacture the RF card terminal, for example, the development of access controls, electronic door locks or terminals for the time recording.
This module can be directly loaded into the various reader molds. It can be used for Arduino, Raspberry Pi and micro-controller.
6. Qunqi 5Pcs RC522 RFID RF IC Card Sensor Module with S50 White Card and Key Ring for Arduino Raspberry Pi
Feature
Current :13-26mA / DC 3.3V,Idle Current :10-13mA / DC 3.3VSleep current: 80uA,Peak current: 30mA,Data Transfer Rate: Max. 10Mbit / s
Power Voltage : 3.3V,Operating frequency: 13.56MHz
Supported card types: mifare1 S50, mifare1 S70, mifare UltraLight, mifare Pro, mifare Desfire
Read Range: 0 ~ 60mm (mifare1 card),Module Interface SPI Parameters
7. KINCREA RFID Master Starter Kit for Arduino, RC522 Sensor Module LCD Servo DC Motor, Update Projects with Tutorials
Feature
Free PDF tutorial(more than 22 lessons) and clear listing in a nice packageThe most economical kit based with Arduino IDE platform to starting programming for those beginners who are interested.
Lcd1602 module with pin header (not need to be soldered by yourself)
100% compatible with MEGA 2560 R3, NANO.
Update version: The kit has 44pcs components With tutorial in a CD including project introduction and source code, add More modules: LED Thermistor Touch sensor module than old version. High quality feedback from our customers makes it more reliable
8. Organizer 3pcs RFID Kit Mifare RC522 RFID Reader Module with S50 White Card and Key Ring for Arduino Raspberry Pi
Feature
The RF IC Card module design the circuit of card read by using the original Philips MFRC522 chipApplicable for the user who need to design or manufacture the RF card terminal.
Module Interface: SPI Data transfer rate: Maximum 10Mbit/s.
Power Voltage : 3.3V,Operating frequency: 13.56MHz.
Organizer RFID Kit, MFRC RC522 RFID-RC522 RF IC Card Reader Sensor Module S50 13.56MHz RFID Smart Card RFID Chip Key Ring Mifare Arduino Raspberry Pi
9. HiLetgo 3pcs RFID Kit - Mifare RC522 RF IC Card Sensor Module + S50 Blank Card + Key Ring for Arduino Raspberry Pi
Feature
The MF522-AN module design the circuit of card read by using the original Philips MFRC522 chip.Easy to use, low cost, and applicable to equipment development and card reader development etc.
Applicable for the user who need to design or manufacture the RF card terminal.
The module can be directly loaded into the various reader molds.
The module use a voltage of 3.3V, it can connected communication with user's any CPU mainboard through several lines of SPI interface, it can ensure stable and reliable work, and reader distance.
10. DaFuRui 5Pack RC522 RFID RF IC Card Sensor Module with S50 White Card and Key Ring Compatible for Arduino
Feature
100% brand new and high quality RC522 RFID RF IC Card Sensor Module.This RFID-RC522 module is based on the Philips MF522-AN board and is delivered together with an S50 card, key Ring and two matching pin strips.
This module can be directly loaded into the various reader molds.
Applicable for the users who need to design or manufacture the RF card terminal.The development of access controls, electronic door locks or terminals for the time recording.
It is supported card types: Mifare1 S50, Mifare1 S70, MIFARE Ultralight, Mifare Pro, and MIFARE DESFire.
