When it comes to choosing your bottled water system 5000 series, there are hundreds of different choices. In our review, weve considered all the various features youll need to know before buying the best bottled water system 5000 series. We hope that through this article, with our comparison table, in-detail review of each product can help you decide which one is your best bottled water system 5000 series.
Best bottled water system 5000 series
1. Flojet BW5000-000A Bottled Water System with Single Inlet 115V US Plug
Feature
Designed for convenience and portability, pump recipe-quality water from commercial bottlesIlluminated on/off switch, provides clear visibility in dark or hard-to-reach places
Quick connect port, speeds installation and replacement of suction and discharge tubing
Quiet operation minimizes noise pollution with noise-dampening rubber feet
Unit shuts off when bottle is depleted, restarts automatically when bottle is replaced
Description
The 5000 Series bottle water system is designed for convenience and portability. When the unit is plugged into an AC power source and a water bottle is connected to the system, fresh water is available for use with coffee/tea machines, water dispensers, refrigerators, ice makers or any application where potable watered is needed. The unit shuts off when water in bottle is depleted and restarts automatically when the empty bottle is replaced with a full bottle.2. Flojet 03526-144A Triplex Diaphragm Automatic Water System Pump, 2.9 GPM 50 PSI, 12 volt DC
Feature
A genuine Flojet product, don't settle for anything lessSelf-priming up to 9 feet suction lift , dry running, three chambers
Soft noise absorbing mounts. Pressure switch setting: 3.4 bar
Snap-in port fittings, built-in bypass for less pulsation
Reduces need for accumulator tank
Corrosion resistant materials
Description
Self-priming up to 9 feet suction lift; Pump able to run dry without damage. Permanent magnet motor, ball bearing totally enclosed. Meets ISO 8846 (Ignition protection).3. Flojet 1202.1050 04406-143A Quad II Water Pump 'Quiet Quad' - 12V DC, 3.2 GPM,Black
Feature
Self-primes up to 2.4M vertical liftFlow rates up to 12.5 liters/min (3.3 US Gallons/min), pressure switch control, capable of pressures up to 2.4Bar (35psi)
Intermittent duty, ressure-switch control to run the pump only as needed
Four-piston design delivers higher flow rates
Quick-connect plug-in ports for easy installation
Description
Established since 1975 as a manufacturer of special application pumps, xylem Flojet is a leading global supplier of small pumps, motors and dispensing pumps for a variety of Industries.4. VEVOR Bottled Water Dispensing System 20 ft Water Dispensing Pump System with US Plug 115V AC Perfect for 5 Gallon Bottle (Single Inlet)
Feature
WATER GALLON PUMP DISPENSER--Water pump dispenser works with a commercial five gallon jug of water.Designed for convenience and portability, pump recipe-quality water from commercial bottles.BOTTLED WATER PUMP WITH NOISE DAMPENING RUBBER FEET--Quiet operation equipped with noise dampening rubber feet to minimize noise pollution, recommend using 4 screws and securing it to a wall to make it even more quiet and cuts down on vibration.
PUMP WATER DISPENSERS--Pump with Illuminated on/off switch, provides clear visibility in dark or hard-to-reach places.This dispensing pump system with 40 PSI (2.8 bar) maximum pressure, and pump will shut off when bottle is empty.
EASY TO INSTALL--The bottled water system comes with easy to read instructions that will make the install a breeze.
MORE CONVENIENCE--The water dispensing pump system will deliver the water under pressure to an individual drinking water faucet, let you have portable hot or chilled water anytime! Convenient for water inlet of a refrigerator, coffee & Tea machine the coffee and tea taste more mellow by using fresh and filtered water.
5. Flojet 5000 Series Bottled Water System with Single Inlet 115V US Plug
6. BW5000-010A Flojet HIGH Flow Bottled Water Dispensing System
Feature
HIGH FLOW model BW5000-010A7. TDRFORCE Bottled Water Dispenser Pump System for Coffee Brewer Ice-Maker Refrigerator (Double Tube)
Feature
Illuminated on/off switch, provides clear visibility in dark or hard-to-reach placesEasy for Installation,quick connect port, speeds installation and replacement of suction and discharge tubing
Quiet operation minimizes noise pollution with noise-dampening rubber feet
Suitable for Cold & Hot Water,unit shuts off when bottle is depleted, restarts automatically when bottle is replaced.Build-in Check Valve to prevent back flow
CE Certificate.
8. FloJet Replacement BW5000 SINGLE WAND Kit # 21000738A
Feature
FloJet Single Wand Replacement Kit For the BW5000 ModelsFrom Original Manufacturer - Part# 21000738A
This is a "Replacement" kit for the BW5000 series FloJet Bottled Water pumps. Kit does not include a motor.
This wand kit DOES NOT fit the BW1000, BW1020, BW2000, BW3000 or BW4000 FloJet Models
9. FloJet BW5000 Bottled Water System PLUS Chrome Long Reach FAUCET KIT
Feature
Model BW5000 with Chrome Long Neck Faucet - All you need for installation is includedDesigned for convenience and portability, pump recipe-quality water from commercial bottles
Illuminated on/off switch, provides clear visibility in dark or hard-to-reach places
Quick connect port, speeds installation and replacement of suction and discharge tubing
Quick connect adapter for the faucet connection.
10. VEVOR Bottled Water System 20 ft Water Dispensing System Single Inlet US Plug New Style with AC/DC Adapter Suitable for Refrigerator Ice Maker Coffee Makers and Water Dispensers
Feature
BOTTLED WATER SYSTEM WITH 40 PSI WATER PUMP- Flow Capacity: 1 Gallon/min; Rated Power: 35W; Maximum Pressure: 40psi2.8bar);Pump Size: 14x19x7.6cm; Weight: 3kg/6lbs.QUICK ADAPTER FOR FAUCET CONNECTION AND THREE CURRENT AVAILABLEThis type of water pump is suitable for alternating current 110V, 230V and direct current 12V. The red button on it controls the power switch which can provide power for 3-6 gallon plastic bottles.
EASY FOR INSTALLATION AND - Quick connect port speeds installation and replacement of suction and discharge tubing. Compact size for easy mounting. Four mounting holes help to install as you need.
USER-FRIENDLY AND GOOD PROTECTION DESIGN- Equipped with noise dampening rubber feet to minimize noise pollution. Full automatic, operate when there is water, stop automatically when there is no water. Thermal protection prevents overheating, protecting the pump and control box from damage. Provides dependable run dry capabilities, extending the life of the pump.
WIDE APPLICATION TO MEET YOUR DIFFERENT NEEDS- It can be widely used in refrigerator water and ice maker coffee makers, espresso makers, water dispensers, sinks and anywhere else on-demand water supply is needed.
