What are criterias of the best circular saw track? It is not easy to find the answer. We spent many hours to analyst top 10 circular saw track and find the best one for you. Let’s find more detail below.
Best circular saw track
1. Kreg KMA2685 Rip-Cut Circular Saw Guide, Blue
Feature
Make rip cuts and crosscuts up to 24" wideCut multiple pieces to the same size with just one setup
Use the oversize edge guide for precise control throughout the cut
Eliminate need for marking, measuring, and layout lines
Take your saw to the material instead of having to take your material to the saw
Description
TURN AN ORDINARY CIRCULAR SAW INTO A PRECISION EDGE-GUIDED CUTTING TOOLGreat projects start with high-quality cuts, and you can make those cutsmore easily than you ever imaginedusing your circular saw plus the Rip-Cut Circular Saw Edge Guide.
The Kreg Rip-Cut turns your circular saw into a precision edge-guided cutting tool that makes straight, accurate, repeatable cuts in plywood, MDF, and other large sheets. With the Rip-Cut, you can cut with the confidence you want and the precision you need.
The Rip-Cut easily makes straight, accurate, repeatable cuts without measuring, marking, or having to keep the saw on the cut line. The Rip-Cut does this with a long edge guide that follows the straight edge of the sheet you are cutting. So, all you have to do is lock the saw in at the measurement you wantup to 24"using the built-in measuring scale, and then make your cut.
With a built-in measuring scale, you dont have to measure and mark each cut, either. Just lock the saw sled at your desired cut width, and you're all set, whether you need to cut one piece or make multiple pieces of the exact same size. Plus, the Rip-Cut makes it easier to cut down large sheets by yourself.
The Rip-Cut is very easy to use. Simply mount your saw to the universal sledit accepts most left-blade or right-blade sawsand then slide the sled onto the aluminum rail. After a simple one-time calibration, you can lock in your cut width (up to 24") using the measuring scale and precision cursor. Then, just hold the edge guide against the edge of your sheet as you guide the saw. Youll get straight, accurate, repeatable cuts easily every time.
2. Circular Saw Track (Circular Saw Track)
Feature
Rip, crosscut, and make angled cuts up to 48" long in plywood, MDF, and panelsSimply align the guide track with your marks to make accurate cuts
Hold track in place without Clamps thanks to Anti-slip guide strips
Prevent splintering with anti-chip strips that support material during the cut
Begin cuts easily with a starting block that the supports saw and allows normal blade guard operation,
Description
Kreg KMA2700 Circular Saw Track3. CDIYTOOL Parallel Rail Guide System, Aluminium Alloy Circular Saw Track Set Fixed Guide Rail Bracket Auxiliary Tools T-Slot T-Track Miter Track Jig Fixture Slot Router for Woodworking Workbench
Feature
The fixed guide rail of the circular saw is made of aluminum alloy material, which is wear-resistant and durable, and can be used for many years.Thanks to the laser-engraved markings, you'll be able to read the measurements clearly for years on end. They won't smudge, fade, or disappear.The total length of the track is 1200mm,It is composed of 4 sections respectively,197-497mm/497-797mm/797-1097mm/1097-1397mm.
No embossing track: The screw contact area is large, and the wrench can pass through the predicted position of the screw, and the track will not be embossed during operation.
The limit block of the parallel track can be adjusted. Loosen the big screw then small screw, so the limit block can be adjusted left or right.
The backplane is smooth and does not jam, and slices smoothly during operation, which improves efficiency,With lock design, you can fix the slicing distance with one button, reducing operation errors.
4. Kreg KMA2700 Accu-Cut 48-Inch Guide Track System With KMA2685 Rip-Cut 24-Inch Precision Edge Guide
Feature
CUTS: Make rip cuts and crosscuts up to 24" wide / Cut multiple pieces to the same size with just one setup / Prevent splintering with anti-chip strips that support material during the cutGUIDE: Use the oversize edge guide for precise control throughout the cut / Eliminate need for marking, measuring, and layout lines / Hold track in place without clamps thanks to anti-slip guide strips
EASY SAWING: Take your saw to the material instead of having to take your material to the saw
VERSATILE: Rip, cross cut, and make angled cuts up to 48" long in plywood, MDF, and panels / Simply align the Guide Track with your marks to make accurate cuts
BUNDLE INCLUDES: Kreg KMA2700 Accu-Cut 48-Inch Circular Saw Guide Track System
5. Bora 100 WTX Ruled Clamp Edge Saw Guide for Woodworking, Contractors, Carpenters and DIY, Guide for Circular Saws, 100 Inch Cutting Length, 545100
Feature
Get It Straight Every Time: This rigid aluminum guide rail is a must-have accessory for keeping your cutting on track. Its long 100-inch length allows you to saw with precision and skillLocked In: The adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood. The locking handle grabs surfaces for a secure edge that won't budge while you cut
Make Measuring Easy: The WTX Clamp Edge has a ruled edge with both metric and imperial measurements to make your job of getting perfect cuts quick and easy
Suited For Your Needs: The modular design allows for additional extensions to be added to expand your cutting length up to 100 inches. With the WTX clamping edge, youll save time and eliminate waste due to crooked, uneven cuts
Additional Accessories: The BORA WTX Saw Guide System has additional accessories including the Saw Plate, Track Clamps for cutting any angle, and the Router Guide
100 Inches Of Cutting: With your purchase you will receive a 50" WTX Clamp Edge and WTX 50" Extension, connect the pieces together for 100 inches of straight cuts
6. BORA 50 NGX Clamp Edge, Straight Cut Guide for Circular Saws, Easy to Use, Great for Cross-Cutting Plywood Sheets and Routing Dados, 544050
Feature
Circular Saw Guide For Large Sheets: The Bora Clamp Edge is an ideal accessory for accurately cutting wide boards and pieces of plywood that are too big for a table sawClamps Firmly: This straight edge guide has a wide rubberized clamp face to ensure a tight non-slip grip that wont leave indentations and is easily adjustable to meet the length of your project
Extreme Durability: Made of heavy-gauge, extruded aluminum, it is rigid enough to resist bowing and hold a straight edge, and durable enough to withstand repeated use
Use With Any Circular Saw: This guide is compatible with any brand of circular saw, not just Bora Tools. Use it with circular saws, routers, and jigsaws. For big projects, easily increase the length up to 100 in. by adding the Bora NGX 50-inch aluminum extension
7. Bora NGX 6-Piece Premier Set, Straight Cutting Saw Guide Accessories for Circular Saw, 544600K
Feature
Includes: 50-inch NGX clamp edge, 50-inch NGX Extension with connectors, Saw Plate, 2 rolls of non-chip strip, 2 Track Clamps, T-Square AccessoryClamping end on straight edge moves with handle for easy adjustability from one side
Locking handle grabs work surfaces for secure grip that wont budge
Includes 50 Clamp Edge and 50 extension for 100 cutting capacity
Made of heavy-gauge, rigid aluminum for extreme durability
8. BORA 100" NGX Clamp Edge, Straight Cut Guide for Circular Saws, Includes 50-Inch Clamp Edge & 50-Inch Extension for 100-Inch Cutting Length, 544100
Feature
Clamping end moves with handle for easy adjustability from one sideLocking handle grabs work surfaces for a secure grip that wont budge
Made of heavy-gauge, rigid aluminum for extreme durability
Use with circular saws, routers, Jig saws, and other portable power tools
Includes Bora NGX 50-inch clamp edge and Bora NGX 50-inch extension piece with connectors
9. Evolution - 027-0004C Power Tools R185CCSX 7-1/4" Multi-Material Circular Track Saw Kit w/ 40" Track
Feature
Designed To Cut A Wide Range Of Materials Without Changing BladesPowerful 15 Amp, Hi-Torque Motor Accurately Cuts With An Adjustable 2 - 1/2 Inch Depth
Includes 40 Inch Track, Ergonomic Soft Grip Handles, Dust Extraction Port & Adaptor, And Premium 7-1/4 Inch Blade
0-45 Bevel Tilt With Pivot For Compatible And Precise Cutting Capabilities
10. WEN CT1065 10-Amp 6.5-Inch Plunge Cut Sidewinder Circular Track Saw
Feature
Ditch the table saw: rip boards up to 2-1/3 inches thick with clean, splinter-free cutsCreate 45-degree bevel cuts in boards up to 1-5/8 inches thick
Perfect for ripping boards or for performing internal plunge cuts
Includes a 6.5-inch 24-tooth carbide-tipped blade (165 mm) with a 20 mm arbor
Compatible with the WEN CT9502 100-Inch Track and the WEN CT992F Track Saw Clamps
