We spent many hours on research to finding electrolysis tester, reading product features, product specifications for this guide. For those of you who wish to the best electrolysis tester, you should not miss this article. electrolysis tester coming in a variety of types but also different price range. The following is the top 10 electrolysis tester by our suggestions:
Best electrolysis tester
1. new Express$ TDS Water Electrolyzer test + TDS Meter Tester Filter Water Quality Purity
Feature
LCD display ph meter ATC + EC TDS tester backlight + TDS Water Electrolyzer Test Quality Purity Filter Hydroponic ToolDescription
Performance indication: Basic functions: * Switch / lock button (ON / OFF / HOLD) Function: Power on: in the shutdown state, press the button, you can boot. Automatic shutdown: 5 minutes after the use of automatic shutdown. Manual shutdown: press the button 3s to shut down continuously. * Press the function key to display the test water quality conductivity us / cm value, and then press once to display the Celsius temperature , then press once again to display the Fahrenheit. The function selection button (MODE): the default display test water quality total solid dissolved amount ppm; Temperature ; then repeat the cycle to display the above. * CLEAR key function: clear. Clear the lock read and re-test. * Automatic test and lock reading: clear after the insertion of water can be automatically read, according to the different water quality shows the corresponding TDS value or conductivity us / cm value. And then automatically locked. * Scale function: according to national standard scale. And with appropriate reference to international practice. Direct drinking water warning with reference to national standards using TDS = 40 for the dividing line. Less than 40 show green backlight, for qualified straight drinking water, more than 40 show red backlit, for non-direct drinking water. * Backlight function: the use of low-power backlight, easy to night and light dark place for testing use. At the same time as a direct drinking water to determine the show. * Large screen display: the use of high distortion STN thin liquid crystal, display 4-digit value and the corresponding physical unit. TDS read range: 0-9999, identifier; Supply voltage: CR2032 battery, DC3V; 230mAh. (Not included) Test range: TDS: 0 to 9999 ppm. Accuracy: 2% F.S 6. Temperature test range: 0 ~ 99 (Fahrenheit for 32 ~ 212 ), acc2. Whitelotous Electrolyzer Quick Water Quality Testing Electrolysis Iron Bars TDS Tester
Feature
Very Easy to operate , quick testing, obvious results. simplest and cheapest way to test the water quality. buy your self & see the condition of your drinking water.The electronic color tester is an effective sales tool that visually demonstrates the difference between high TDS water and low TDS water.
Voltage: 220 V
Power cord length: 80 cm
Iron bars Length: 7 cm
Description
Features: 1. Very Easy to operate , quick testing, obvious results. simplest and cheapest way to test the water quality. buy your self & see the condition of your drinking water. 2. The electronic color tester is an effective sales tool that visually demonstrates the difference between high TDS water and low TDS water.
Testing methods:
Prepare two transparent cups of water (100 to 150 ml ) one cup holds tap water, the other cup holds RO water.
Put metal pillar into two cups, turn ON and begin the test, After 30 to 60 seconds, turn it off and remove the water electrolyzer.
Caution: Avoid the electric shock while using the devise; Do not touch the rods once the precipitator is plugged into an electric outlet.
Testing Analysis Results:
Black: Heavy Metals
Yellow: Dissolved acids, fluoride and other organic matter
Green: Arsenic, mercury, lead, copper, sodium
Blue: Bacteria, viruses, carcinogens, chemical fertilizers, pesticides, etc.
Red: Iron, rust and bacteria
White: lead, zinc, mercury, inorganic dirt
Specifications:
Voltage: 220 V
Power cord length: 80 cm
Iron bars Length: 7 cm
Package list:
1 X Water Quality Testing
3. SONKIR Soil pH Meter, MS02 3-in-1 Soil Moisture/Light/pH Tester Gardening Tool Kits for Plant Care, Great for Garden, Lawn, Farm, Indoor & Outdoor Use (Green)
Feature
INDUSTRY-LEADING WARRANTY: We promise 12-Month Hassle Free Money Back or Free New Replacement guarantee if you receive the defective products or have any questions before you decide to leave a negative feedback or review !3-IN-1 FUNCTION: Test soil moisture, pH value and sunlight level of plant with our MS02 meter, quickly helps you specialize in grasping when you need to water your plant, control the pH value in the soil and know about whether it gets adequate sunlight. Kindly NOTE: The pH function of this soil tester can not be applied to test pH value of any other liquid.
ACCURATE AND RELIABLE: Premium Double-needle Detection Technology strongly enhances the speed and accuracy of detecting and analyzing soil moisture and pH acidity, refuse to be a killer of plants, promote plant growth in a healthy way.
EASY TO USE: No batteries needed, just insert the sensor probe into the soil about 2-4 inches, toggle switch to test moisture, pH, sunlight you would like to measure, then wait for a few minutes till the pointer stops swinging to get a stable reading on the scale dial. If the plant is very dry, the soil pointer will not swing, that means your plant needs water.
INDOOR & OUTDOOR USE: Design to be lightweight and portable, easy to carry around for outdoor use, ideal soil test tool kit for home plants, garden, lawn and farm.
Description
Let Sonkir MS02 Soil pH Tester Make You Become a Good Plant Carer !3-IN-1 Design
This 3-in-1 soil moisture meter is designed to better know the condition of your plant, detect soil moisture, help you know the pH value of the soil, determine if plants get enough sunlight to keep plants grow healthier !
Scientific Data Monitoring
Help you control every detail and track all changes about your plants. Keep your plants in a healthy condition through scientific data monitoring !
Specifications:
Model: MS02
Color: Green
pH Range: 3.5-8 pH (3.5-6.5 Acid, 7-8 Alkaline)
Moisture Range: 1-10 (1-3 Dry, 4-7 Nor, 8-10 Wet)
Relative Light: 0-2000 lux (0-200 Low, 200-500 Low+, 500-1000 Nor, 1000-2000 Hgh)
Product Size: 11.5 x 2.0 x 1.5 inches
Copper Probe Diameter: 0.2 inch
Aluminum Probe Diameter: 0.2 inch
Probe Length: 7.9 inches
Distance Between Probes: 0.5 inch
Product Weight: 2 oz/56 g
How to Use:
Step 1: Switch to moisture/pH/light position according to demand
Step 2: Insert the probe into the soil about 2-4 inches
Step 3: Adjust the position of the probe until the pointer on the dial swing slightly
Step 4: Check moisture/pH/light level in the dial after 10 minutes
Step 5: Remove probe from soil and wipe clean after each use
Kindly Note:
1. Do not force it into very hard soil or touch hard objects since it will be easy to damage the probe
2. Do not use it to test pure water or other liquids. It can only be used to measure soil
3. Do not leave the meter in the soil for a long time
4. Please wipe and clean the probe after each use
5. If the soil is too dry the indicator will not move, and water it before testing
Warranty Policy:
- Industry-leading 12-Month Money Back Warranty
- After-sale Support: [email protected]
4. TDS 220V Electrolysis Precipitator Quick Filtered Water Quality Tester - Nature Element Measurements pH/TDS/ORP/TEMP/PPM/EC Tester - 1 x Water Electrolysis
Feature
Nature Element Measurements pH/TDS/ORP/TEMP/PPM/EC Tester - -Using this item can help you test all kind of impurities in water by shows different color. There are 6 colors (yellow, green, blue, red, white, black) to indicate the different object in water, and the yellow color shows that water is health.Applicable industries: water laboratories, CDC, the aquaculture industry, hospitals, swimming pools, household tap water quality testing.
Color: Black
Size: about 9.8cm x 2.5cm x 4cm
TDS 220V Electrolysis Precipitator Quick Filtered Water Quality Tester - Nature Element Measurements pH/TDS/ORP/TEMP/PPM/EC Tester - 1 x Water Electrolysis
Description
TDS 220V Electrolysis Precipitator Quick Filtered Water Quality Tester - Nature Element Measurements pH/TDS/ORP/TEMP/PPM/EC Tester - , , , , , 1 x Water Electrolysis, , , , Detail Pictures:, ,Features: -The 4 electrolytic bars (2 iron bars, 2 aluminum rods) are 2 group positive and negative poles (each group has a positive pole and negative pole). It can test two different liquid at one time, convenient to use.
-Using this item can help you test all kind of impurities in water by shows different color. There are 6 colors (yellow, green, blue, red, white, black) to indicate the different object in water, and the yellow color shows that water is health.
Applicable industries: water laboratories, CDC, the aquaculture industry, hospitals, swimming pools, household tap water quality testing.
Specification:
Color: Black
Size: about 9.8cm x 2.5cm x 4cm
Cable Length: 85cm
Voltage: 220V
Plug Type: According to different countries, we will send the corresponding adapter.
Testing Analysis Results:
Black: Heavy Metals
White: lead, zinc, mercury, inorganic dirt
Yellow: Dissolved acids, fluoride and other organic matter
Green: Arsenic, mercury, lead, copper, sodium
Blue: Bacteria, viruses, carcinogens, chemical fertilizers, pesticides, etc.
Red: Iron, rust and bacteria
Testing Method:
(1) Preparing testing water--get two 100-150ml white glasses,one glass full of tap water,and the other full of R/O water.Then put them on the desk side by side.
(2) Preparing for testing--put the electrolyser lying on the glass,plug in 220V power.
(3) Testing--push the power switch of electrolyser into ON,start to test.
(4) Normally, the testing time is 30 seconds.When it's over,push the OFF button and take the electrolyser out.
Please Notice:
(1) After power on, please don&#
5. ttnight Water Quality Tester Electrolysis Iron Bars TDS Tester Electrolyzer Quick Water Quality Testing Ideal Water Test Meter All Kinds Water
Feature
Test drinking water purity to ensure it's healthy.Simple to operate with quick testing to get obvious results.
Visually demonstrates the difference between high TDS water and low TDS water.
Application: pure water production and drinking, tap water, well water, sea water, fish tank water.
It is a unique gift to keep your family from dirty water and keep healthy.
Description
Features:1. Very Easy to operate , quick testing, obvious results. simplest and cheapest way to test the water quality. buy your self & see the condition of your drinking water.
2. The electronic color tester is an effective sales tool that visually demonstrates the difference between high TDS water and low TDS water.
Testing methods:
Prepare two transparent cups of water (100 to 150 ml ) one cup holds tap water, the other cup holds RO water.
Put metal pillar into two cups, turn ON and begin the test, After 30 to 60 seconds, turn it off and remove the water electrolyzer.
Caution: Avoid the electric shock while using the devise; Do not touch the rods once the precipitator is plugged into an electric outlet.
Testing Analysis Results:
Black: Heavy Metals
Yellow: Dissolved acids, fluoride and other organic matter
Green: Arsenic, mercury, lead, copper, sodium
Blue: Bacteria, viruses, carcinogens, chemical fertilizers, pesticides, etc.
Red: Iron, rust and bacteria
White: lead, zinc, mercury, inorganic dirt
Specifications:
Voltage: 225 V
Power cord length: 80 cm
Iron bars Length: 7 cm
Package inckuded:
1 X Water Quality Testing
6. Eisco Labs Brownlee Water Electrolysis Apparatus
Feature
Demonstrate electrolysisRests on a battery jar and uses a 6V battery or 10V DC power supply
Note: Power supply and battery jar are not included. Two inverted test tubes are included
Description
Brownlee Water Electrolysis Apparatus(1) Apparatus, (2) Corks, (2) Inverted Test Tubes
Simple and economical type of electrolysis apparatus. Platinumelectrodes are attached to insulated connecting rods which are attached to binding posts mounted on a non-conducting support. The support rests across the top of a battery jar (not included) and has two clips that each hold an inverted test tube. Operates on 6V battery or 10V DC power supply.
7. Awakingdemi WaterTDS Tester,Electrolyzer Quick Water Quality Testing Electrolysis Iron Bars TDS Tester
Feature
The electronic color tester is an effective sales tool that visually demonstrates the difference between high TDS water and low TDS water.Very Easy to operate , quick testing, obvious results. simplest and cheapest way to test the water quality. buy your self & see the condition of your drinking water.
Prepare two transparent cups of water (100 to 150 ml ) one cup holds tap water, the other cup holds RO water.
Put metal pillar into two cups, turn ON and begin the test, After 30 to 60 seconds, turn it off and remove the water electrolyzer.
Caution: Avoid the electric shock while using the devise; Do not touch the rods once the precipitator is plugged into an electric outlet.
Description
Features:1. Very Easy to operate , quick testing, obvious results. simplest and cheapest way to test the water quality. buy your self & see the condition of your drinking water.
2. The electronic color tester is an effective sales tool that visually demonstrates the difference between high TDS water and low TDS water.
Testing methods:
Prepare two transparent cups of water (100 to 150 ml ) one cup holds tap water, the other cup holds RO water.
Put metal pillar into two cups, turn ON and begin the test, After 30 to 60 seconds, turn it off and remove the water electrolyzer.
Caution: Avoid the electric shock while using the devise; Do not touch the rods once the precipitator is plugged into an electric outlet.
Testing Analysis Results:
Black: Heavy Metals
Yellow: Dissolved acids, fluoride and other organic matter
Green: Arsenic, mercury, lead, copper, sodium
Blue: Bacteria, viruses, carcinogens, chemical fertilizers, pesticides, etc.
Red: Iron, rust and bacteria
White: lead, zinc, mercury, inorganic dirt
Specifications:
Voltage: 225 V
Power cord length: 80 cm
Iron bars Length: 7 cm
Package included:
1 X Water Quality Testing
8. Matefield Electrolyzer Quick Water Quality Testing Electrolysis Iron Bars TDS Tester
Feature
Very Easy to operate , quick testing, obvious results. simplest and cheapest way to test the water quality. buy your self & see the condition of your drinking water.The electronic color tester is an effective sales tool that visually demonstrates the difference between high TDS water and low TDS water.
Prepare two transparent cups of water (100 to 150 ml ) one cup holds tap water, the other cup holds RO water.
Put metal pillar into two cups, turn ON and begin the test, After 30 to 60 seconds, turn it off and remove the water electrolyzer.
Caution: Avoid the electric shock while using the devise; Do not touch the rods once the precipitator is plugged into an electric outlet.
Description
Testing Analysis Results:
Black: Heavy Metals
Yellow: Dissolved acids, fluoride and other organic matter
Green: Arsenic, mercury, lead, copper, sodium
Blue: Bacteria, viruses, carcinogens, chemical fertilizers, pesticides, etc.
Red: Iron, rust and bacteria
White: lead, zinc, mercury, inorganic dirt
Specifications:
Voltage: 225 V
Power cord length: 80 cm
Iron bars Length: 7 cm
Package included:
1 X Water Quality Testing
9. AMZVASO - Professional 225V Original Electrolysis Iron Bars TDS Water Tester Electrolyzer Quick Water Quality Testing Easy Operation
Feature
Very Easy to operate , quick testing, obvious results. simplest and cheapest way to test the water quality. buy your self & see the condition of your drinking water.
The electronic color tester is an effective sales tool that visually demonstrates the difference between high TDS water and low TDS water
Description
Voltage: 225 V
Power cord length: 80 cm
Iron bars Length: 7 cm
1 X Water Quality Testing
10. Studyset Electrolyzer Quick Water Quality Testing Electrolysis Equipment TDS Tester Meter
Feature
--Very Easy to operate , quick testing, obvious results. simplest and cheapest way to test the water quality. buy your self & see the condition of your drinking water.--The electronic color tester is an effective sales tool that visually demonstrates the difference between high TDS water and low TDS water.
--Use note: you need to have your own converter.
Description
Description:
Product Name: Water Quality Testing
Product specification: 9.9x2.8x11.5cm
Model: electrolyzer
Frequency: 50HZ
Efficacy: water quality testing
Packing: carton
Material: alloy
Type of water treatment machine: water purifier
Power line length: 80cm
Black: Heavy Metals
Yellow: Dissolved acids, fluoride and other organic matter
Green: Arsenic, mercury, lead, copper, sodium
Blue: Bacteria, viruses, carcinogens, chemical fertilizers, pesticides, etc.
Red: Iron, rust and bacteria
White: lead, zinc, mercury, inorganic dirt
Method of operation: prepare 2 glasses, one cup contains pure water or distilled water, one cup contains tap water, put 2 groups of iron and aluminum rods into the glass, plug in the power supply, open the switch, start the inspection, do not touch the electrolyte rod under the state of power, do not put your fingers into the detection water, do not use metal containers containing water detection.
Package Included:
1 * Water Quality Testing
Note:
Because manual measurement, there will be some error, which is normal.
Due to the light and screen setting difference, the color may be slightly different from the pictures.
Please tell us first when you have any problem, we will give you the best service and solve the problem ASAP. Thank you so much.
