We spent many hours on research and managed to find top 10 ender 3d printer pro parts that is best suitable for you. This review is based on reliable sources, product specs, and hundreds of customer reviews. In this article, were going to highlight the main features of the best ender 3d printer pro parts and why they are important when it comes to choosing the right one.
Best ender 3d printer pro parts
1. Creality Official Ender 3 Extruder Upgrade Metal MK8 Bowden Extruder Drive Feeder 3D Printer Parts for Ender-3 V2/Ender-3 Pro/Ender-3 Max CR-10/10S Gray Aluminum 1.75mm Filament Extruder
Feature
Quality AssuranceCreality 100% official MK8 all-metal extruder. High quality aluminum alloy material and sandblast to surface oxidization, ensuring this gray extruder is last for long term use. Works better than original plastic stock extruder. Original Creality 3D printers accessories for Ender-3/Ender-3 Pro/Ender-3S/Ender-3 V2/Ender-3 Max/CR-10/CR-10S.Work BetterOur extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed. The extruder drive has better stronger pressure pushing the filament into the printer nozzle and so will improve the printer's performance.
Improved PerformanceThe optimized extruder with metal extrusion and original hotend kit pushes the filament into the printer nozzle, greatly making the extruder retain power in filament feed-in. And the beveled filament intake can prevent scraping the filament as it is pulled into the feeder.
Easy To InstallDIY kit and you need to assemble by yourself. The full necessary screws & parts kit for the extruder is included. Referring to instructions or our 5th picture to install, it is very easy and straightforward to switch to this upgraded part on your machine.
Official Creality 3D StoreMore than 20 engineers provide 24/7 customer service with 12-months limited and lifetime technical assistance. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what question.
2. Creality Original Ultra Removable Magnetic 3D Printer Build Surface Heated Bed Cover Ender 3/Ender 3 Pro/Ender 3 V2/Ender 5 Pro/Ender 5 3D Printer 235X235MM
Feature
ATTENTION BEFORE USEFirstly, please make sure the bottom of the soft magnetic sticker and the top layer are firmly adsorbed before installation. If it cannot be adsorbed, please rotate it 90 degrees and try again until they are completely adsorbed and will not separate. Secondly, after finding the correct magnetic direction, then you can stick the bottom part on the hot bed. Please pay attention to the direction before installation.ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal.It is recommended to heat the hot bed for 2-3 minutes before removing the model with the removal tools.
EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
SIMPLE INSTALLATION & UNIVERSAL: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.Works with all FDM printer models, and all heated and non-heated 3D printer beds.
3. 3D Printer Parts Ender 3 Hotend Assembled Ender 3 Pro Extruder Kit 24V 40W for Creality Ender 3 / Ender 3 Pro/Ender 3 V2 with Silicon Cover and 0.4mm Nozzles
Feature
ENDER 3 EXTRUDER is 100% ORIGINAL CREALITY 3D PRINTINGE PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY, WE JUST CONFIRM IT WORKS WITH CREALITY ENDER 3 3D PRINTERS. OTHERS BRANDS WE DO NOT TEST IT.5 PIECES 0.4MM 3D PRINTERS NOZZLES AS GIFT.
ENDER 3 EXTRUDER HOT END CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE
MK8 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 24V 40W
TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON)
4. Creality Ender 3 Original 4010 Fans 40x40x10MM DC 24V Extruder Hot End Fan and DC 24V Turbo Fan for Ender 3 / Ender 3 Pro 3D Printer
Feature
Fit for: Creality Ender 3, Ender 3X, Ender 3 ProMaterials: Plastic
Operation Voltage: DC 24V
Weight: 0.078KG
Package included: DC 24V Extruder Hot End Fan and DC 24V Turbo fan
5. Aokin 2 Pcs Bowden PTFE Tubing (1.5m/Pcs Blue) for 1.75mm Filament with 4 Pcs PC4-M6 Fittings and 4 Pcs PC4-M10 Pneumatic Fittings for Creality Ender 3/3 Pro, Ender 5/5 Pro, CR-10/10S 3D Printer, etc
Feature
Compatibility: fit for 3D Printer 1.75mm Filament and other devices.Blue PTFE Tubing: durable PTFE material, safe and odor-free, self-lubricating, high-temperature resistance; Inside diameter 2mm, outside diameter 4mm.
PC4-M6 fittings: copper and plastic material, durable and sturdy; Thread: 6 mm, inner diameter(blue end): 4mm, fit for the tube whose outer diameter is 4mm.
PC4-M10 fittings: stainless steel and plastic material, anti-oxidation, anti-corrosion, and high hardness; Thread: 10 mm, inner diameter(black end): 4mm, fit for the tube whose outer diameter is 4mm.
Easy to Install: the extruder fittings are PC4-M6 and the hotend fittings are PC4-M10, the upper part can be inserted outer diameter 4mm PTFE tube and self-locking.
6. Creality 4Pcs Metal Leveling Nuts and Springs Upgraded Set for Ender 3/3 Pro/3 V2/3 Max, Ender 5/5 Plus/ 5 Pro, CR 10 Series 3D Printer Bed Staying Level
Feature
NOTE - The length of springs are about 25mm, which is slightly longer than the ender 3 series printers(Including ender 3/ender 3 pro/ender 3 v2). The springs need to cut them shorter than the original ones in order to adapt them to the printer or adjust the hot bed to be higher to fit the springs.Suitable for - Upgraded aluminum hand twist level nut are original upgraded replacement part for Ender 3/3 Pro/3 V2/3 Max, Ender 5/5 Plus/ 5 Pro, CR-10, CR-10 V2, CR-10 V3,CR-10 Max, CR 10, CR-10 Mini, CR-10S, CR 10S Pro,CR 10S Pro V2, CR-10 Plus, CR-X, CR 20.
Metal Material - Metal material is stronger, it will twist more tightly than plastic nuts.
Easy to use - The torque of these nuts is large, making it easier to fine tune the hot bed.
Quality - Made by high quality aluminum, last much longer your stock plastic nuts.
7. Creality 4PCS Upgraded Aluminum Hand Twist Leveling Nut and 4PCS Hot Bed Die Springs for Ender 3/3 Pro, Ender 5/5 Plus/Pro, CR-10, CR10S/10S Pro, CR 20 3D Printer
Feature
Upgraded Aluminum Hand Twist Level Nut. These red aluminum nuts are original upgraded replacement part for Ender 3/3 Pro/3 X, Ender 5/5 Plus/ 5 Pro, CR-10, CR-10 V2, CR-10 Max, CR 10, CR-10 Mini, CR-10S, CR 10S Pro,CR-10 Plus, CR-X, CR 20.Last Over Years. Made by high quality aluminum, last much longer your stock plastic nuts.
Metal nut is more powerful and will twist more tightly than plastic nuts.The torque of these nuts is large, making it easier to fine tune the hot bed.
Upgraded bed-level springs for more stiff and accurate bed leveling.
Notice:The Aluminum Hand Twist Level Nut doesn't fit for Creality CR-10 S4 and CR-10 S5
8. Ender 3 Hotend, Authentic Creality Assembled Hotend Kit 3D Printer Parts with 5X 0.4mm Nozzles for Ender 3 Ender 3 V2 and Ender 3 Pro
Feature
Compatibility: 100% Creality Original. This assembled hotend kit from Creality is a plug and play replacement for Ender 3/ Ender 3 V2 /Ender 3 Pro/ Ender 3S.Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit.
MK8 extruder hot end kit, white wire was temperature thermistor, braided wire was heating tube 24V 40W. Tip of the nozzle, aluminum heating block, throat pipe (built-in teflon).
Five 0.4mm brass nozzle are included in this hotend kit. This kit can work with different sizes of MK8 nozzle: 0.2mm/0.3mm/0.4mm/0.5mm /0.6mm/0.8mm/1.0mm.
Silicone Cover is provided to help keep temperatures on the hotend much more stable and this will result in higher print quality and consistency.
9. Creality Upgrade 3D Printer Parts MK8 Extruder Aluminum Alloy Block Bowden Extruder 1.75mm Filament for Creality 3D Ender 3,Ender 3 Pro,Ender 5/5 Pro,CR-7,CR-8, CR-10, CR-10S, S4, and S5
Feature
Original Aluminum Drive Feed for Creality 3D CR-7, CR-8, CR-10, CR-10 S4, CR-10 S5, it is stable and durable.MK8 extruder drive feed kit, can replace acrylic parts of CR-10, CR-10 S4, CR-10 S5.
Full Metal Aluminum Alloy
Used for 1.75mm filament
DIY aluminum block, need to assembly by yourself
10. Creality 3D Printer Parts 5PCS Brass Extruder Wheel 40 Teeth Drive Gear for CR-10.CR-10S,S4,S5,Ender 3,Ender 3 Pro,Ender 3 V2
Feature
Model Number:40 Teeth Mk7 / Mk 8 Brass Planetary Gear WheelMaterial:Brass
The number of teeth:40 teeth
Use For :3D printer
Specification:5mm*11mm*11mm