It’s not that easy to choose the right fluke meter remote since there’s a ton of things you need to consider first. Some of the factors we paid attention to in our evaluation when reviewing the top fluke meter remote on the market. Through our research, weve looked through catalogues to pick out the very best for you. Through our comparison table, in-detail reviews of each product, were going to reveal the name of our best fluke meter remote on the marketbut dont skip to the end!
Best fluke meter remote
1. Fluke 323 Clamp Meter For Commercial/Residential Electricians, Measures AC Current To 400 A,Measures AC/DC Voltage To 600 V, Resistance And Continuity, Includes 2 Year Warranty And Soft Carrying Case
Feature
Digital clamp meter measures AC current to 400 amp, AC and DC voltage to 600V, and resistance to 4 kilohms. Does not measure DC currentTrue RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform
Jaw opening measures current in a conductor up to 30mm without touching or interrupting the circuit
Audible continuity sensor confirms that the circuit conducts electricity
Meets IEC safety standard 61010-1, and is rated for CAT IV installations to 300V and CAT III installations to 600V
Description
The Fluke true-rms clamp meter is a great clamp meter for general, grab-and-go troubleshooting needs. The Fluke 323 323-AMZN is ideally suited for current measurements up to 400 a in tight cable compartments.2. Fluke 324 True RMS Clamp Meter
Feature
Digital clamp meter measures AC current to 400 amp, AC and DC voltage to 600V, and resistance to 4 kilohmsTrue RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform
Jaw opening measures current in a conductor up to 30mm without touching or interrupting the circuit
Audible continuity sensor confirms that the circuit conducts electricity
Meets IEC safety standard 61010-1, and is rated for CAT IV installations to 300V and CAT III installations to 600V.Maximum Operating Temperature:+50C
Slim, ergonomic design
Large, easy to read backlight display
CAT IV 300V/CAT III 600 Volt safety rating
Hold button
Temperature and capacitance measurement
Description
The Fluke true-rms clamp meter is a great clamp meter for general, grab-and-go troubleshooting needs. The Fluke 323 323-AMZN is ideally suited for current measurements up to 400 a in tight cable compartments.3. Fluke 116/323 Multimeter and Clamp Meter HVAC Combo Kit, AC/DC Voltage, AC Current 400 A, Microamps To Test Flame Sensors, Includes Temp Probe, Test Leads, TPAK And Carrying Case
Feature
Fluke 116 Digital Multimeter features built-in thermometer for HVAC applicationsFluke 116 Digital Multimeter features microamps to test flame sensors
Fluke 116 Digital Multimeter low input impedance helps prevent false readings due to ghost voltage
Fluke 323 True-rms Clamp Meter measures 400 A AC current and 600 VAC and DC voltage
Fluke 323 True-rms Clamp Meter features True RMS AC voltage and current for accurate measurements on non-linear signals
Description
For the complete solution to HVAC troubleshooting the extra value-packed HVAC Technician's Combo Kit, provides the ability to troubleshoot and solve problems more efficiently by providing all the needed accessories an HVAC professional would need in a compact carry case.4. Fluke 381 Remote Display True-RMS AC/DC Clamp Meter with iFlex
Feature
Large, easy to read backlight display automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurementSoft carrying case
True-rms ac/dc voltage and current for accurate measurements on non-linear signals
State of the art signal processing allows for use in noisy electrical environments while providing stable readings
Wireless technology allows the display to be carried up to 30 ft. away from the point of measurement for added flexibility without interference with measurement accuracy
The removable magnetic display can be conveniently mounted where it is easily seen
iFlex flexible current probe expands the measurement range to 2500 A ac
CAT IV 600 V, CAT III 1000 V
Integrated low pass filter and state of the art signal processing allows for use in noisy electrical environments
Description
The Fluke 381 Remote Display True-RMS AC/DC Clamp Meter with iFlex is the first clamp meter with a detachable, remote display and iFlex flexible current probe for easier, faster, safer measurements. The meter allows you to remove the display for even more flexibility. Clamp the meter around a conductor, remove the display and walk across the room to operate controls or remove protective equipment, all while watching real-time readings. The new iFlex flexible current probe (included) expands the measurement range to 2500 A ac while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access. An ergonomic design fits in your hand and can be used while wearing protective equipment. Wireless technology allows the display to be carried up to 30 ft. away from the point of measurement for added flexibility without interference with measurement accuracy. Included accessories: 18-inch iFlex flexible current probe, Coated instruction card Safety information sheet Soft carrying case TL75 test leads Five AA Alkaline batteries5. Fluke 233 Remote Display Multimeter
Feature
Removable magnetic display can be conveniently mounted where it is easily seenBuilt in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
Battery life: 400 hours
True-rms AC voltage and current for accurate measurements on non-linear signals
Low power wireless technology allows the display to be carried up to 10 meters (33 feet) away from the point of measurement for added flexibility
Removable magnetic display can be conveniently mounted where it is easily seen
Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
Battery life: 400 hours
Description
Now you can work in two places at once. With the new Fluke 233 wireless remote display Multimeter you dontmt need the help of another person when reading the display. Standing on ladders, tangling long Test leads, or calling on a second person while testing are all now a thing of the past. Measure safely while placing the meter in hazardous areas, in clean rooms or near moving machinery. The Fluke 233 is a tool that will make your job easier.6. Fluke 302+ Digital Clamp Meter AC/DC Multimeter
7. Fluke 365 Detachable Jaw True-RMS AC/DC Clamp Meter
Feature
200 A ac and dc current measurement with detachable jaw600 V ac and dc voltage measurement
Detachable jaw makes accessing wires and viewing the display easier
Compact design fits in your hand and can be used while wearing protective equipment. State of the art signal processing allows for use in noisy electrical environments while providing stable readings
Built in flashlight/torch allows for easy illumination and identification of wires
8. Fluke 902 FC HVAC True-RMS Clamp Meter
Feature
200 dc current measurements to measure flame rodExtended resistance range to measure thermistors up to 60k
Capture flue gas temperature
Fluke connects your meter to your phone through Bluetooth to help you get more done faster and safer
True-rms voltage and current for accurate measurements on non-linear signals
9. FLUKE 362 True-rms AC DC Clamp Meter
Feature
The lead time is about 2-3 days. FedEx/DHL shipping time is about 5-7 days.If any questions, please do not open any claims, please contact us first.
10. Fluke TP165X Remote Control Probe with Test Button
Feature
Remote control probe with test buttonSlim probe with test button keeps your eyes on the panel while probing hard to reach points
