It’s hard to know which is good foundation epoxy. There are alot of foundation epoxy reviews on internet. In this article we suggest top 10 the best foundation epoxy for you. Please read carefully and choose what is the best foundation epoxy for you.
Best foundation epoxy
1. Sika Anchorfix-2, super strength anchoring adhesive, Two component anchor system for threaded bars in uncracked concrete, 10.1 fl. Oz
Feature
Sika AnchorFix-2 is a two-Component, Solvent- and Styrene-Free, Modified-Acrylic Anchoring Adhesive.SUPPORTS: It can be used on concrete solid, masonry, steel, hard natural stone, solid rock.
USES: Fast curing anchoring adhesive for rebars / reinforcing steel, threaded rods, bolts and special fastening systems.
PERFORMANCE: High load capacity. Drinkable water certified. Anchoring without expansion forces.
APPLICATION: Applied with standard guns and by experienced professionals
2. Damtite 04072 Concrete Super Patch Repair, 7 lb. Pail
Feature
High strength, permanent, waterproof finishResurfaces Concrete sidewalks, Driveways & walls
Repairs cracks & holes in Concrete, masonry, brick & stone
7 lb
3. PC Products 72561 PC-Concrete Two-Part Epoxy Adhesive Paste for Anchoring and Crack Repair, 8.6 oz Cartridge, Gray
Feature
Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonryHigh-tack paste resists moisture for application in damp environments and can be used in vertical applications
Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to +115 degrees F
Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F)
Meets ASTM C881-99
Formulated for anchoring threaded rods, bolts, rebar dowels and smooth dowels into concrete, grout filled block and unreinforced masonry.
PC-Concrete is excellent for filling and repairing cracks in concrete, and out-performs all caulks and hydraulic cements.
PC-Concrete will not come loose from any cleaned concrete surface and will hold during expansion and contraction of concrete.
PC-Concrete is the best solution for permanent concrete repair.
4. PC Products PC-Masonry Epoxy Adhesive Paste, Two-Part Repair, 8 oz in Two Cans, Gray 70079
Feature
Two-part masonry repair epoxy adhesive paste replaces missing concrete or fills cracks on deteriorating masonryResists moisture and can be applied to both wet and dry surfaces
Can be used in indoor and outdoor applications, with an application temperature range of 35 to 115 degrees F, and a service temperature range of -20 to +200 degrees F
Non-sagging paste can be used on horizontal and overhead surfaces
Can be painted, stained, and machined after fully cured
5. PC Products PC-Masonry Epoxy Adhesive Paste, Two-Part Repair, 32 oz in Two Jars, Gray 73209
Feature
Two-part masonry repair epoxy adhesive paste replaces missing concrete or fills cracks on deteriorating masonryResists moisture and can be applied to both wet and dry surfaces
Can be used in indoor and outdoor applications, with an application temperature range of 35 to 115 degrees F, and a service temperature range of -20 to +200 degrees F
Non-sagging paste can be used on horizontal and overhead surfaces
Can be painted, stained, and machined after fully cured
6. 10 oz. Dewalt AC100+ Gold Quik-Shot Acrylic Epoxy Adhesive (Case of 12)
Feature
ICC-ES ESR 2582 - Category 1, Cracked and Uncracked ConcreteBonding threaded rod and reinforcing bar into hardened concrete and masonry
Can be installed in a wide range of base material temperatures
Consistent performance in low and high strength concrete (2,500 to 8,500 psi)
7. Polygem Liquid Concrete Repair (LCR) Kit Penetrating Injection Epoxy for Foundation & Concrete Crack Repair & Leak Prevention DIY Complete Kit Repairs Average Concrete Foundation Crack of 8 feet
Feature
Applications include - Basement foundation crack repair, industrial warehouse and residential floors, patios and sidewalks, balcony, pool and parking decks, reservoir, tank and pool leak repairExcellent adhesion to concrete, wood, fiberglass, and metal surface; restores structural strength
Made in the USA - Ideal for homeowners, contractors, remodelers, D.I.Y. users, and maintenance professionals alike
Meets ASTM C881, Types I, II, IV and V, Grades 1 and 2, contains no VOCs or Solvents; 100% solids, and is chemical and solvent resistant
Kit contains enough material to repair an average 1/16 inch wide, 8-foot crack in a concrete wall
8. RadonSeal Easy-Peel DIY Concrete Foundation Crack Repair Kit (10 ft) - Easy to Remove Surface Sealer Makes Clean-Up a Breeze
Feature
Easy Peel Surface Seal / Port Adhesive - Simply peel-off the surface seal and injection ports when the repair is complete.Professional Grade Materials - The same materials used by waterproofing professionals. 2-Component urethane means better expansion, adhesion, and durability.
No Drilling or Excavating Required - Fix cracks without drilling into the wall.
Complete Kit - Each kit contains all the materials needed for crack repair. No special tool required. Use your own caulking gun.
Permanent Results - Our injection foam will not become brittle, crack or peel. Closed-cell foam is impervious to water and radon gas.
9. Simpson Strong-Tie ETIPAC10KT CRACK-PAC Injection Epoxy Crack Repair Kit
Feature
low viscosity crack injection epoxy designed to repair cracks in concreteThe low surface tension allows the product to penetrate fine to medium width cracks
10. Concrete Foundation Crack Repair Kit - Ultra-Low Viscosity Polyurethane - FLEXKIT-1150-10
Feature
Permanently Stops and Prevents Water Leaks in Concrete Cracks.Can Be Used For Wet or Dry Cracks.
Compression Seal That Remains Flexible.
Formulated To Repair Hairline Width Concrete Cracks.
Dual-Component Injection Gun is required (Included in this kit)
