Finding the best fume fan suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best fume fan
1. Kulannder Handy Carry Solder Smoker Absorber Remover Fume Extrator Smoke Prevention Absorber DIY Working Fan
Feature
The Powerful Remove Fume Extrator and handy carrySturdy Aluminium alloy material
Long-lasting working time for over 50,000 hours
Easy to replace filter
Great for electronics, arts and crafts, and stained glass work
Description
Kulannder DIY working Fan believed in handy carry and sturdy Solder Smoke Absorber, also can use a cooler fan on working table. It's easy to DIY operating by yourself, just soldering, drivepipe and lock the screw, then finish a best and useful DIY Remover Fume Extrator or a cooler working fan.
NOTES:
1, The best working position: the distance between Solder point and Fans no more than 20cm.
2, Don't constant working over 24hours.
Features:
1, Power consumption: 30W
2, Maximum air flow: 2000ml/min
3, Working temperature: -30 to 70 degree
4, Lifetime: 50,000 hours
5, Certification: ULCULCCCCE TUVtuvEMCROHS
6, Weight: 1.3lb
7, Size: 8.8'*6'*2.4'
2. 1000l Adjustable Solder Smoke Absorber Remover Fume Extractor Carbon Filter Quiet Fan for ESD Soldering Station
Feature
The filter consists of foam and activated carbon, Which is ideal for absorbing toxinsAdjustable absorbing angle
Low noise and high- efficient fan
Made of antistatic material
Easy to replace filter
Description
Features:- The filter consists of foam and activated carbon, Which is ideal for absorbing toxins.
- Adjustable absorbing angle.
- Low noise and high- efficient fan.
- Made of antistatic material.
- Easy to replace filter.
Specification:
- Power supply: AC120, 60Hz
- Power consumption: 30W
- Maximum air flow: 1000L/min
- Inlet concentration: 2(mg/L)
- Dimensions: 8.7 x 10.6 x 6.6 in
- Weight: 2.33lb
- Carbon filer Size: 5.1 x 5.1 x 0.4 inch
- Amount of activated carbon filter: 0.02lb
- Max. Absorbing weight of components per one filter: 0.004lb
Package contents:
- 1x soldering absorber
- 1x manual
3. 3-in-1 Solder Smoke Absorber Fume Extractor Fan with Carbon Filter LED Lamp 10 Brightness 3 Light Colors Adjustable Arms and Tabletop Clamp for ESD DIY Working Soldering Desoldering Rework Station
Feature
Lead smoke is toxic during soldering, even if it is lead-free solder, which contains a certain amount of lead, harmful to your health. Our 3in1 Soldering smoke absorber/fume remover/smoke extractor prevention absorber DIY working fan(with Carbon Filter LED Daylight)protect you away from poisonous smoke. Angle flexibility amply meets the various situations, can precisely cover the smoke diffusing area.Low Noise Fan with Smoke Filter: ESD safe smoke Extractor fan can extract away the solder, flux, chemicals, gases or other hazardous substances in the solder smoke, and purified by the activated carbon filter net. Extra 3 easily replaceable filters give you good and timely smoke prevention filter supplements. Recommended filter net replacement every 4 to 5 months depending on usage.
Multifunctional Lamp: At the time of smoke absorbed fan working, its 3 Light Colors and 10 Brightness Levels can help you work in various light conditions. Natural light illumination, soft and without ghost, glare, protect eyes. USB power ports allow you to plug into any USB outlets, such as cellphone wall adapter/power bank/laptops or another USB outlet. It's easily changed the light color or adjust the brightness by the controller. Widely used on a desk, workbench, table, or bedside table by a metal clamp, does a secure position, will not occupy your extra tabletop space.
Adjustable Arms: The lamp head can be put 220 degrees up and down, and 360 degrees swivel. 8.7 inches and 8.7 inches extendable long arm and expanded up to 14 inches. And equipped 3 fixed knobs and 2 pair fixed springs help you adjust the lamp position smoothly without swaying left or right, neither sharp falling nor shaking, NOTE: To guarantee the best smoke absorbing, please make the fan and solder joint within 6 inches(15cm).
Costumers Service: We have products 100 percent quality inspection, and all customers have 3 months of exchange or return policy and promise to provide a 3 years aftersales service. If for any reason you are not satisfied with your purchase, please contact us.
4. YaeTek Adjustable Solder Smoke Absorber Remover Bench Top Fume Extractor Carbon Filter Quiet Exhaust Fan for Soldering Station ESD-Safe 1000l/min
Feature
Power supply: AC120, 60HzMaterial: antistatic material,The filter consists of foam and activated carbon
Size of Carbon filer : 5.1 inch * 5.1 inch * 0.4 inch
Activated absorbing angle,
High- efficient absorb toxic gases Smoke, sodering fumes, flux smoke, odor to provides a safe working condition.
5. Valtcan Solder Smoke Absorber Fume Extractor Fan
Feature
Remove Smoke, soldering fumes, flux smoke, odor from soldering stations, workstations, nails, paint etc quick,safe and efficiently496 model equivalent to the 493 plus extra filters. Comes with 3 Active carbon filters, Easily replaceable by swamping out old for new one in filter slot. Pull filter guard out to remove filter and replace with new one. Then push back filter guard to hold filter in place.
Adjustable tilt for more direct smoke absorption from your workbench. Twist knobs at two ends to loosen and then adjust tilt of smoke absorber. Fasten knobs to secure fan front when desired tilt is obtained.
Made of ESD safe material, lightweight and durable material. Low noise and high- efficient fan operates at acceptable db levels in solder workstations.
On/off button located in back of smoke absorber fan. Plugs into AC socket for power. Comes in 493 model box with extra filters.
6. KOTTO Solder Smoke Absorber Remover Fume Extractor Smoke Prevention Absorber DIY Working Fan for Soldering Station
Feature
Solder Smoke Absorber/Fume Remover/Smoke Extractor Prevention Absorber DIY Working Fan for Soldering Station0.4 inch thick activated carbon filter absorbs and captures fumes from solder, flux, chemicals, gases and helps to prevent dissipation into the room.
Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. 4 non-slip heavy duty rubber feet anchors the unit to the ground. Handy carrying handle allows you to move the unit easily.
Easy to replace filter, Includes one replacement filter. Working temperature: -2060, Power consumption: 120V, 30W (50 / 60Hz).
US based customer support, 30 days full satisfaction no question asked return period.
7. KOTTO Soldering Smoke Absorber, Electric Iron Welding Fume Extractor Soldering Smoke Absorber Remover DIY Fume Extractor Filter with Strong Suction
Feature
Soldering Smoke Absorber, Electric Iron Welding Fume Extractor Soldering Smoke Absorber Remover DIY Fume Extractor Filter with Strong Suction.A 24-inch flexible tube, Fume hood can adjust direction according to actual needs.
Adjustable optimized 6000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. The fan speed is adjustable. Suction: 40W, 6000 RPM, 52CFM, Noise Level: 55dbm, Life Expectancy: 50,000 hours, Static pressure: 125mmH2O.
Easy to replace the filter, Includes one replacement filter. Working temperature: -2060, Power consumption: 120V-240V, 40W ( 12V, 4A Power supply).
US-based customer support, 30 days full satisfaction no question asked return period. Replacement filters: https://www.amazon.com/dp/B07WG24L8Z/ - Assembly Instructions: https://youtu.be/-EW8sMxegnw.
8. Solder Smoke Absorber Lamps, Flexible ESD-Safe Fume Extractor Remover Fan with 3 Colors Light, Fume Prevention Absorber DIY Working Fan for Soldering
Feature
High-efficient AbsorbThe powerful remove fume extractor absorber fan, Strong absorption, effectively absorb the toxic fumes, air purification.3 LED-Lluminable3 colors of light.It can be illuminated while smoking awayso meet various working environments.
ESD safe: Anti-static smoke Extractor, Low noise fan, great for electronics, arts and crafts, soldering station work.
Easy to use: Unique disassemble designed,and easy to replace filter. The filter consists of foam and activated carbon, Which is ideal for absorbing toxins to protect healthy.
2 fixed ways: Adjustable absorbing angle, flexible construction -- The durable metal clip can be fixed to any flat surface that is less than 2.56 ''/ 6.5 cm (max) thick.
9. Solder Smoke Absorber Remover Fume Extractor Smoke Prevention Absorber
Feature
High qualityLow Noise Fan with Smoke Filter: ESD safe smoke Extractor fan with 0.4 inch thick activated carbon filter can extract away the solder, flux, chemicals, gases or other hazardous substances in the solder smoke, and purified by the activated carbon filter net. Extra 2 easily replaceable filters give you good and timely smoke prevention filter supplements. Recommended filter net replacement every 4 to 5 months depending on usage.Prevent From Poisonous SmokeLead smoke is toxic during soldering, even if it is lead-free solder, which contains a certain amount of lead, harmful to your health. Our WEIJIANG Soldering smoke absorber/fume remover/smoke extractor prevention absorber DIY working fan can protect you away from poisonous smoke.
Upgraded DesignOptimized 3300 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. 4 non-slip heavy duty rubber feet anchors the unit to the ground. Handy carrying handle allows you to move the unit easily.
Working temperature -2060, Power consumption: 120V, 30W (50 / 60Hz). Optimized 3300 revolutions per minute Fan provide excellent smoke suction. WEIJIANG Ball bearing pure copper motor support 50000 hours lifetime.
Worry-Free WarrantyWEIJIANG smoke Extractor fan offer a replacement or full refund within 12 months. Please believe in quality and our service and feel free to contact us anytime and our dedicated customer support team would be happy to assist your issue.
10. Solder Smoker Absorber Remover Fume Extractor Smoke Prevention Absorber DIY Working Fan Soldering with spare Carbon filter
Feature
Solder Smoke Absorber/Fume Remover/Smoke Extractor Prevention Absorber DIY Working Fan for Soldering Station.It adopt the high performance fan with low noise, and the suction is strongThe structure is simple. The replacement of the activated carbon filter piece is convenient and quick.
Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. Long-lasting working time for over 50,000 hours.
Comes with 5 Active carbon filters. The filter is made of special foam with refined activated carbon, which has high suction and flux absorption properties.
It's a good helper for mobile phone maintenance, great for electronics, arts and crafts, stained glass work, soldering station work.
