When it comes to choosing your pc fan hub powered, there are hundreds of different choices. In our review, weve considered all the various features youll need to know before buying the best pc fan hub powered. We hope that through this article, with our comparison table, in-detail review of each product can help you decide which one is your best pc fan hub powered.
Best pc fan hub powered
1. Thermaltake Commander FP SATA Powered 10 Port 4-Pin PWM Fan Hub AC-023-AN1NAN-A1
Feature
Supports 10 (4-pin) Independent Fans :Capable of connecting 10 PWM fans, the Commander FP enables users to optimally expand cooling capability within the chassisDirect SATA Power Input: Powers up to 9 PWM fans simultaneously from PSU to prevent stray current when the fan hub is in use
Included Ties/Velcro for Easy Placement: 5 reusable beaded cable ties, 2 velcro tabs, and one PWM signal cable that let users keep the cables neat and tidy and hold the fan hub steadily in place
Blue LED Power Indicator
1 Year Warranty
2. Electop PC Chassis Fan Hub CPU Cooling HUB 10 Port 12V 4 Pin Fan PWM Hub Molex Controller
Feature
Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces. Designed for 12V 4-Pin 3-Pin fans, support simultaneous starting at most 10 channel fans.In the hub interfaces, the RED CPU interface is the CPU fan dedicated interface (with speed detection function). Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal.
For both 4-Pin and 3-Pin fans. Please note 4Pin fan speed can be adjusted by temperature control. 3Pin fan can also be used, but because 3Pin has no PWM function, it is at fixed speed after inserting.
There is EVA double-sided adhesive at the back of the hub, which can be easily affixed to a flat place. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.
RED is expected to be a pass through for the CPU fan. So, the hub has a power source fed from the computer power supply, then the speed is regulated by the speed for the "source" fan. You can connect to the CPU fan lead on the system board or the chassis fan lead. The ten fans will spin at the same speed, that designated by the system for that fan. If the chassis fan is configured in BIOS to run at 50%, you will have 10 fans at 50%.
3. NOYITO 10-Channel PC FAN PWM HUB DC12V SATA Port Power Supply Maximum Support 10-Channel PWM Fan Temperature Control Suitable for Motherboard 3Pin 4Pin fan
Feature
Product Name: PC FAN PWM HUB. The main function: to expand the 10-way 4-pin fan interface to solve the problem of insufficient number of motherboard fan interface, and centralized handling fan cable messy problem.PWM interface to connect the motherboard CPU_FAN interface, Orange interface for the CPU fan dedicated interface (with speed function). Black interface for the PWM conventional fan interface (no speed signal, but does not affect the PWM function). Note: to avoid the speed of chaos and computer crashes, an interface to expand out of the multi-channel interface, only show one of the fan speed!
Use: For 12V motherboard 3Pin / 4Pin fan. [3Pin fan can also be used, but after the connection is full-speed run, because 3Pin fan without PWM speed control function].
Hub PCB board behind with a 3M adhesive, easy to paste in the flat place. Also with a fixed screw hole. The product package also contains a 60CM PWM temperature control cable.
SATA Port Power Supply Maximum Support 10-Channel PWM Fan.
4. DEEPCOOL FH-10 Integrated Fan Hub, Powering up to 10 Fans (3-pin Non-PWM or 4-pin PWM), Occupying only One 4-pin Motherboard Header
Feature
If 3-pin non-PWM fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED.If 4-pin PWM fans are connected to this fan hub, DUTY RATIO of all PWM fans can be adjusted at the same time. That is, all PWM fans will run at the same DUTY RATIO. Only speed of Fan 1 can be identified by the system.
Capable of connecting to 10 PC fans simultaneously for cooling the computer system.
Powered by a stable SATA connection to the system PSU for up to 10 fans.
Velcro and screw mountings applicable for the tower interiors.
5. DeepCool FH-10 Fan Cooling
Feature
Capable of connecting to 10 PC fans simultaneously for cooling the computer systemModular design that allows aesthetic cable organization
Powered by a stable SATA connection to the system PSU for up to 10 fans
Each port has its own PWM function and the fan speed can be adjusted at the same time (only the speed of Fan 1 can be identified by the system.)
Velcro and screw mountings applicable for the tower interiors
6. ThreeBulls PWM Fan Hub, PC CPU Cooling 4 PIN/3PIN Fan Power Cable Hub Splitter Adapter Sleeved PWM Case Fan Splitter for 12V Desktop Computer Cooler Case Fans 1 to 5 Way (15.7 Inch)
Feature
Excellent 4-pin PWM 1 to 5 splitter fan power supply extension cable for PC computer motherboard fans, make you easier diy PC computer case.Widely Compatible: The cable is one 4-pin female connector to 4-pin male connector, support 4-pin and 3-pin fans cable, the fan power cable compatible with 4 pin and 3 pin PC case fans.
Easy to plug, the fan extension cable offers greater flexibility between Motherboard and CPU cooling fans.
Black sleeved nylon braided cable, more durable and make the inside of pc case looks more clean & tidy.
Package contents: 1 black 15.7 inch 1-to-5 splitter fan power supply extension cables, male to female connector plug.
7. SilverStone Technology Silverstone 8-Port PWM Fan Hub/Splitter for 4-Pin & 3-Pin Fans in Black SST-CPF04-USA (Newest Version)
Feature
1-to-8 PWM connectors2200F capacitor provides stable voltage
Support speed detection for accurately controlling fans
PWM 4pin header x 8, compatible with 3pin cable (Speed control function is unavailable for 3 pin fans. Attached 3 pin fans will run at maximum RPM).
Compact size at only 54mm (W) x 19mm (H) x 40mm (D). Included 3M adhesive to apply anywhere within your case.
8. Chassis Fan Hub CPU Cooling 10 Port 12 V SATA to Fan-Header with 4 Pin PWM Controller Efficient Chassis Adhesive Computer Cooling System Dedicated Supply from PSU to Link Multiple Points
Feature
MANAGES MULTIPLE FANS - If your motherboard lacks fan interfaces, our pwm fan hub is the neat and tidy way to expand. The 12V fan controller accurately controls 4-pin fan speed from a single case inputCOOLING WHEN YOU NEED IT - Quiet when you don't. The red port on our pwm fan controller allows the operating system to adjust fan speed based on temps. The pwm fan hub then matches the power level for the other ports
EASY TO INSTALL - Just plug the SATA fan controller into the motherboard and connect to the PSU. Double-sided adhesive mounts the pc fan hub to any flat surface and the screw hole allows it to be fixed to the chassis
NO FRILLS, ALL FUNCTION - Strong wire connections and clean sleeving are part of our simple, cost effective design. Take care during installation to avoid bending the pins and capacitor
MONEY BACK WARRANTY - All of our products are backed by a manufacturer's warranty, and we will go the extra mile to make things right. If you are unhappy for any reason, contact us for a full refund
9. YELLOW SAND SHELL Chassis Fan Hub CPU Cooling | 10 Port 12 V SATA to Fan-Header with 4 Pin PWM Controller | Dedicated Supply from PSU to Link Multiple Points
Feature
MOST EFFICIENT SATA TO FAN ADAPTER IN 2019 Managing multiple fans from a single case input has become easier for you now. If your motherboard lacks fan interfaces, use this neat & tidy way to add fans & expand fan interfaces designed for 12 V 4-pin fan. This PWM hub SATA accurately controls fan speed, you can slow down & speed up the fans up to the maximum speed. You need to connect the SATA & the 4 pin at the same time to run multiple fans.PWM FAN CONTROLLER TEMPERATURE CONTROL The CPU Port (red port), would be the only port that can be controlled by the operating system. The other 9 black fan ports CAN NOT be adjusted in speed and will copy the power level of what the red port is at. Please note 4 Pin fan speed can be adjusted by temperature control as well. 3 Pin fans may also be used but have no PWM function and will stay at it's fixed speed after inserting.
INSTALLATION & CONFIGURATION Simple installation & easy configuration, this fan splitter will work even if only connected to the PSU with SATA connector. You just plug the board into the CPU fan motherboard connection & then SATA for power. It has EVA double-sided adhesive tape at the back of the hub to mount to the case or any flat place. You can fix the screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.
STEP BY STEP SET-UP You will receive 1 hub & 1 PWM connector in your package. The PWM interface is connected to CPU fan interface on motherboard by PWM cable & the red interface is dedicated for CPU fan. Connect 1 fan to the red port on fan hub then connect remaining fans. You then need to connect the fan hubs PWM cable to the motherboard. Connect the power supply SATA cable to fan hub before you attach/stick it on the chassis.
MONEY BACK PRODUCT WARRANTY Our product is backed up by manufacturers warranty so feel free to contact us for any query or information. We have a track record of ensuring happiness of clients and are absolutely confident that our product will exceed your expectations. Just in case the product falls short of your expectations in any manner, you can return it for a 100% refund. We will go an extra mile to redress the situation at hand.
10. Fancasee 4-Pin PWM Fan Power Supply Cable 1 to 10 Splitter 10 Way Hub 15 Pin SATA Powered PC Case Internal Motherboard Fan Power Extension Cable Cord for ATX Computer Case 4-Pin and 3-Pin Cooling Fans
Feature
Excellent 1 to 10 splitter 10 way 4-pin PWM fan power supply extension hub, it provide a better power supply solution for atx PC computer case internal motherboard cooling fans & cpu fans.Widely Compatible: support 4-pin and 3-pin pc case fans cable; this 1 to 10 splitter 10 way fan power extension hub compatible with 4-pin and 3-pin pc case fans.
Plug-n-Play, easy to use; 10 splitter 10 way 4 pin PWM pc case fan hub.
The 10 splitter 10 way extension hub offers greater flexibility between motherboard and cooling fans in the atx pc case.
Please be kindly noted that this 10 splitter pc case fan hub need to be connected with the 15-pin SATA power supply cable; And the PWM interface should be connected to CPU_FAN port on the motherboard with the dedicated cable in the package.
