What are criterias of the best snaptoggle stainless steel? It is not easy to find the answer. We spent many hours to analyst top 10 snaptoggle stainless steel and find the best one for you. Let’s find more detail below.
Best snaptoggle stainless steel
1. TOGGLER SNAPTOGGLE Drywall Anchor with Included Bolts for 1/4-20 Fastener Size; Holds 80 pounds Each in 1/2-in Drywall by TOGGLER (12 Pack)
Feature
Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting materialAnchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
Made in USA, and includes 1/4"-20 UNC-threaded bolts
Ultimate tensile strength is 265 lb. in 1/2" drywall and 1,080 lb. in concrete block with a 1/4"-20 UNC bolt (included)
Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
Description
Mount anything!The TOGGLER SNAPTOGGLE BB toggle anchor provides a secure hold from within various hollow materials 3/8" to 3-5/8" thick including gypsum board, drywall, and concrete block, includes 1/4"-20 UNC bolts, and is made in USA. The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. If using bolts other than those supplied, the anchor accepts 1/4"-20 UNC metal bolts with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.
The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1/2" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting one of the included bolts through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.
2. TOGGLER SNAPTOGGLE BC Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 2-1/2" Grip Range, For 3/8"-16 UNC Fastener Size (Pack of 25)
Feature
Toggle anchor installs behind 3/8"- to 2-1/2"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting materialAnchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
Made in USA, and works with 3/8"-16 UNC-threaded metal bolts (sold separately)
Ultimate tensile strength is 275 lb. in 1/2" drywall and 1,745 lb. in concrete block with a 3/8"-16 UNC bolt
Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
Description
The TOGGLER SNAPTOGGLE BC toggle anchor provides a secure hold from within various hollow materials 3/8" to 2-1/2" thick including gypsum board, drywall, and concrete block, and is made in USA. The anchor requires a 3/8"-16 UNC-threaded metal bolt with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.
The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 3/4" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting a bolt through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.
Specifications
Ultimate Tensile and Shear Strength Values
| Media | Drill Diameter | Bolt Description | Ultimate Tensile Strength | Ultimate Shear Strength |
| 1/2" Drywall | 3/4" | 3/8"-16 UNC zinc-plated steel | 275 lb. | 292 lb. |
| 5/8" Drywall | 3/4" | 3/8"-16 UNC zinc-plated steel | 576 lb. | 406 lb. |
| 1/2" Drywall with 25 Gauge Stud* | 3/4" | 3/8"-16 UNC zinc-plated steel | 466 lb. | Not available |
| 5/8" Drywall with 25 Gauge Stud* | 3/4" | 3/8"-16 UNC zinc-plated steel | 488 lb. | Not available |
| Concrete Block | 3/4" | 3/8"-16 UNC zinc-plated steel | 1,745 lb. | Not available |
*Failure measured as breakage of drywall portion.
Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.
Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.
TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.
3. Simpson Strong-Tie FT18250C10 3/16"-24 FlipToggle Anchor with 2-1/2" Screw Bolt (10/Box)
Feature
New one strap design for easier insertion and flipping operationIdeal for all type of hollow wall, up to 3" (75mm) thick
Requires an one half inch hole
Fast and easy installation
Eliminates the potential for sagging fixtures
4. Simpson Strong-Tie FT18250C25 3/16"FlipToggle Anchor with 2-1/2" Bolt, 25ct
5. Drywall Anchors(20pcs), Drywall Anchors Heavy Duty,Wall Anchors and Screws for Drywall, Concrete Anchors 270 lbs in 1/2" Drywall for 1/4"-20 UNC Fastener Size
Feature
Professionals AnchorOur anchor is with massive range of applications and fully tested.It is the ultimate answer to some of the most awkward and demanding tasks that professionals face when fixing to hollow materialsSave Money and Time ! Our anchor can be installed in less than 10 seconds thanks to its pivoting head and strap design.
Premium Quality and Durable:This anchors are engineered from impact and chemical resistant material,which are very durable.
Versatile UsesOur anchor is a versatile plasterboard drywall anchor fixing with unrivalled strength and is suitable for all types of plasterboard,hardboard, plywood, sheet metal, chipboard, mdf, lath
Buy Risk Free:All Our anchor are backed by Lifetime warranty.Simply email us back if our product ever fails you and we'll mail you a new original replacement free of charge.
6. TOGGLER SNAPTOGGLE BAS Toggle Anchor, 304 Stainless Steel Channel, Made in US, 3/8" to 3-5/8" Grip Range, For 3/16"-24 UNC Fastener Size (Pack of 100)
Feature
Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting materialAnchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
Made in USA, and works with 3/16"-24 UNC-threaded metal bolts (sold separately)
Ultimate tensile strength is 238 lb. in 1/2" drywall and 802 lb. in concrete block with a 3/16"-24 UNC bolt
Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
7. TOGGLER SNAPTOGGLE Drywall Anchor with Included Bolts for 1/4-20 Fastener Size; Holds up to 265 pounds Each in 1/2-in Drywall by TOGGLER (20 Pack)
Feature
HOLDS 2X MORE THAN WING TOGGLES - SNAPTOGGLES Holds up to 1,080 lbs in concrete block and up to 265 lbs in 1/2-in drywall (Industry standards recommend 1/4 of this ultimate load per anchor)REUSABLE - Metal channel will not fall behind wall - anchor is reusable and works in walls or ceilings 3/8-in to 3-5/8-in thick
Great for hanging flat screen TV's, grab bars, handrails, cabinets and much more. Can be used with Drywall, Tile, Concrete Blocks, Plaster, and More.
SMALLEST DRILL HOLE - Requires a 1/2-in drill bit. (not included)
Package contains 20 anchors and 20 bolts (Bolts are 2.5 inches) - Packaging may Vary
8. Simpson Strong-Tie FT25250R100 1/4" FlipToggle Anchor with 2-1/2" Bolt, 100ct
Feature
New one strap design for easier insertion and flipping operationIdeal for all type of hollow wall, up to 3" (75mm) thick
Requires an one half inch hole
Fast and easy to use and install
Eliminates the potential for sagging fixtures
9. Zinc Self-Drilling Drywall Anchors with Screws Kit, 25 Heavy Duty Metal Wall Anchors and 25#8 x 1-1/4'' Screws - 50 Pieces All Together
Feature
Anchors pre-drills precise hole in types of drywall ,no hole preparation required, made of durable zinc , easily removed.Deep thread design provides strong engagement , locks into many sizes of drywall 3/8, 1/2 or 5/8 gypsum wallboard.
Wide application - They are perfect for hall, bathroom and kitchen hanging accessories, artwork, shelving, light fixtures, mirrors, big picture frames, TV, bike, shelf straps, cabinet & decoration fixing, calligraphy, wall cabinets, curtain rods and small decorative shelves, and more.
Kit Includes 25 Zinc Anchors, 25 #8 x 1-1/4'' Phillips Screws
Hangs up to 50 lbs for Hanging and Mounting
10. Simpson Strong-Tie FT25250C10 1/4" FlipToggle Anchor with 2-1/2" Bolt, 10ct
Feature
New one strap design for easier insertion and flipping operationIdeal for all type of hollow wall, up to 3" (75mm) thick
Requires an one half inch hole
Fast and easy installation
Eliminates the potential for sagging fixtures
