If you looking for torque valve core tool then you are right place. We are searching for the best torque valve core tool on the market and analyze these products to provide you the best choice.
Best torque valve core tool
1. Dynamic DY-150-A TPMS Valve Core Torque Tool
Feature
Torque Range 3.5 inch pounds to 4 inch pounds (.45 nm)Meets industry recommended torque values
Can also be used to remove valve cores
Description
This Valve Core Torque Tool is designed to tighten TPMS valve cores to OE Specifications. Properly torqueing TPMS valve cores not only does the job right but also keeps customers safe by preventing air pressure loss due to over or under tightening. Valve core tool is made of durable professional grade materials and perfect for your service facility needs.2. Schrader 20141 Schrader Valve Core Torque Tool
Feature
Schrader is the global leader in TPMS innovation, design, quality, and technologyMore than 190 million Schrader sensors are in operation worldwide - more than 54% of the global vehicle market
Patented Schrader technology embedded in all OEM and Aftermarket-replacement sensors
Schrader offers direct-fit and programmable EZ-sensor replacement sensors
Defect-free sensors manufactured in highly-automated, secure Schrader manufacturing environments
Tighten valve cores to OE specifications
Helps guard against over or under torquing
Meets Tire and Rim Association (TRA) recommended torque values of 3 to 5 in/lbs. on TRC1 valve cores
Serves as both a core remover and installer
Professional grade tools for the installation, removal and maintenance of TPMS sensors
Description
Schrader part number #20141 is the Valve Core Torque Tool. The Valve Core Torque Tool is used to tighten valve cores to OE specifications. Helps guard against over or under-torquing. Meets Tire and Rim Association (TRA) recommended torque values of 3 to 5 lbs. on TRC1 valve cores. Serves as both a core remover and installer. Order individually.3. JB Industries A32008 Valve Core Torque Tool
Feature
Our valve core torque tool automatically sets proper torque to 5" poundsCalibrated to precise torqueing requirements for core valves
The tool will no longer tighten once proper torque is achieved
Eliminates guess work which results in under and over torqueing
Works with all Schrader valve cores
Description
JB machines all of the access valves at the factory in Aurora, Illinois using the highest level of brass consisting of 65% copper and 35% zinc. This gives our brass fittings and access valves high tensile strength while resisting corrosion. Many import fittings use lower quality brass with lower copper content, resulting in higher failure rates. JB machines all of our valves to the strict guidelines of the ARI to ensure proper sealing of the valve and core surfaces. Our access fittings have generous counter bores to allow for the removal of the core if the flare becomes damaged. All tees and crosses are tapped to receive an access core in all 1/4" SAE flare ends. All pipe connections have internal braze cups for dip tube applications. All valves are equipped with cap and one valve core (braze type, loosely assembled). Temperature range -40 degrees to +250 degrees Fahrenheit (-40 to 121.1 degrees Celsius). Valve core is stainless steel and brass for use with all refrigerants including R-410A. Resistant to oils, alkylates and diluted mineral acids.4. Slime 20178 Valve Core Tool
Feature
For TPMS valve core removal and installationTwist-til-click torque feature prevents over- or undertightening
Automatically adjusts valve core to the manufacturer's recommended specifications
Eliminate leaky valves and avoid false readings
Keeps your TPMS fully operational
Description
Slime's Valve Core Tool is a removal and installation tool for Tire Pressure Monitoring Systems (TPMS). Overtightening the valve core on a Tire Pressure Monitoring System can result in permanent system damage and costly repairs. Undertightening the core can cause valve leaks and false readings. Elimate error with this valve core tool. The unique twist-til-click feature automatically adjusts the valve core to the manufacturer's recommended specification, keeping your TPMS fully operational.5. Steelman 96229 TPMS Valve Core Torque Tool, 4 in-lbs
Feature
Durable torque tool safely removes and installs TR C1 valve cores into all TTV and TPMS tire valvesMeets manufacturers' requirements for proper specifications of 4 Inch-pounds
Bright yellow handle makes tool easy to find in automotive shop
OEM recommends replacing the valve stem components and EPDM rubber seals on TMPS-equipped vehicles every time a tire is dismounted
Colors may vary
Description
Be prepared to work on any car that comes into your shop with this TPMS Valve Core Torque Tool. This durable tool safely and easily removes and installs TR C1 valve cores into all TTV and TPMS tire valves to meet manufacturers' requirements for proper torque specifications of 4 Inch-pounds. The Original Equipment Manufacturers (OEM) requires that the valve stem components and EPDM rubber seals are replaced every time a tire is serviced on vehicles with TPMS, so be sure to stock up on this essential tool today! (Colors May Vary)STEELMAN is an industry leader in automotive and industrial specialty tools and equipment, manufacturing the highest quality, unique, and innovative tools and products, designed to meet the specific needs of mechanics, contractors, and other working professionals.
6. EWK 0.45Nm 4in-lbs Rubber Booted Tire Valve Stem Puller Installer Remover Repair Tool
Feature
Installs properly and removes valve cores.Audible click at achieved torque with automatic reset.
Helps prevent valve core leaks causing low tire pressure & TPMS alerts
Preset torque with two-value display for in-lb and N.m.
Description
*Installs properly and removes valve cores.*Persistent fastening for quality control.
*Audible click at achieved torque with automatic reset.
*Helps prevent valve core leaks causing low tire pressure & TPMS alerts.
*Preset torque with two-value display for in-lb and N.m.
*This tool is set to 4 in-lbs (0.45Nm).
*Soft Grip Handle.
*Length:150mm.
7. Schrader 6005 Dynamometric Valve Core for Screwdriver
Feature
6005 is a torque Ventildreher for all TPMS / RDKS sensors.Assembled bolt torque: 400 Nm
8. Steelman 75060-1 Valve Core Remover
Feature
INSTALL AND REMOVE - Safely remove or install TR C1 valve cores in Schrader valve stems located in tubed or tubeless tiresFITS STANDARD CORES - Fits all standard size bore valve cores on cars, trucks, motorcycles, bicycles, and more
REPLACE AND TIGHTEN VALVES - Prevent flat tires caused by leaking or loose valve cores by tightening or replacing faulty units
SCREWDRIVER STYLE HANDLE - Contoured, screwdriver style handle allows for a better grip during use
NOT TPMS RECOMMENDED - Not recommended for installation on TPMS aluminum valve stems that have specific torque requirements
Description
Easily install or remove TR C1 and similar valve cores in Schrader style valve stems with the STEELMAN 75060-1 Valve Core Remover. This handy, pocket screwdriver sized tool fits all standard bore sized valve cores on tubed and tubeless tire systems on cars, trucks, motorcycles, bicycles, and more. Save money lost to flat tires and poor gas mileage caused by underinflated tires due to leaky or loose valve cores. The contoured, screwdriver style handle fits comfortably into your hand but is small enough to fit into most pockets, mountain bike / road cycling kit, or automotive emergency tool kit. Please note, this tool is not recommended for use in the installation of TPMS aluminum valve stems where proper torque of 4 inch-pounds is required. The Original Equipment Manufacturers (OEM) requires that the valve stem components and EPDM rubber seals are replaced every time a tire is serviced on vehicles with TPMS, making this an essential tool for anyone who does their own tire servicing!STEELMAN is an industry leader in automotive and industrial specialty tools and equipment, manufacturing the highest quality, unique, and innovative tools and products, designed to meet the specific needs of mechanics, contractors, and other working professionals.
9. OTC 3833-17 Tire Pressure Monitoring System Valve Core Torque Driver
Feature
Valve core torque driverPreset with 2-5 inches-pounds
Meets TPMS sensor standard requirement
Tire Pressure Monitoring System accessory
Description
Valve Core Torque Driver. Preset with 25 inchpound Meets TPMS sensor standard requirement. Tire Pressure Monitoring System Accessory.10. Dynamic DY-002A-A TPMS Valve Core and Sensor Torque Tool
Feature
T10 Torx bit for clamp-in valves includedS7 socket for snap-in valves included
Torques to 12 inch pounds (1.4 nm)