We spent many hours on research to finding voltage upconverter, reading product features, product specifications for this guide. For those of you who wish to the best voltage upconverter, you should not miss this article. voltage upconverter coming in a variety of types but also different price range. The following is the top 7 voltage upconverter by our suggestions:
Best voltage upconverter
1. NooElec Ham It Up v1.3 - NooElec RF Upconverter For Software Defined Radio. Works With Most SDRs Like HackRF & RTL-SDR (RTL2832U with E4000, FC0013 or R820T Tuners); MF/HF Converter With SMA Jacks
Feature
Listen to ALL HF, down to 100kHz and below, with nearly any software defined radio!Open-hardware design! Full documentation available: http://opendous.org/Upconverter
Proudly made in the USA and Canada with high-quality components!
Antenna protection on the RF input, in-circuit in both enable and passthrough mode
Full 1-year warranty
Description
Ham/amateur radio enthusiasts, rejoice! Our MF/HF converter for software defined radio will allow you to listen to MF and HF through your existing software defined radio (SDR). If you do not currently have an SDR we have plenty of low-cost solutions available in our store. Proudly designed, fabricated and assembled in the USA and Canada!
Brand new & improved v1.3 version of our popular upconverter is now available for immediate shipment!
Improvements include increased sensitivity, ultra-low voltage noise floor, optional battery-powered operation, side-mounted LED indicators, fully-assembled broadband RF noise-source circuit, u.fl socket for optional external clock injection, surface-mount high-accuracy oscillator and much, much more!
These improvements are in addition to the standard features of the Ham It Up line, including female SMA input and output jacks, ESD protection on the input to product your Ham It Up and SDR, ultra-high-Q & low ESR components used for all filters, PTC protection fuse on power input, enable/disable passthrough toggle switch, and open-hardware design with full published circuitry and specifications.
FREE BONUS: We had space left on the PCB, so rather than waste it we have added a noise source circuit at no additional cost. We have even populated most of the components for you. We have the SMA connector required to complete this bonus noise source circuit available for a small additional fee. Details of the noise source circuit are available with the project documentation.
Full operating instructions, specifications and features list are available on our website, nooelec.com
IMPORTANT NOTE:Ham It Up enclosures designed for versions prior to v1.3 will NOT work 100% with Ham It Up v1.3. A new enclosure, or enclosure upgrade kit, is required. Both items can be found in our store. If you have questions please our support team any time!
2. 1 pcs 1.6W 5V 150K-30MHZ HF Upconverter for RTL2383U SDR Receiver Mixing Chip Adapter Direct Sample with Aluminum Case
Feature
Facilitate: All of the board's input and output terminals using a 5.08mm facilitate external connection.High Efficiency &Application: the digital amp efficiency can be up to 90%.
Safe Protection: The power amplifier module is with short-circuit protection, over voltage protection and over temperature protection.
Quiet Design: audio power amplifier, BTL mode without noisy and interference current sound.
Excellenct Sound: Sound quality is very good by using this audio power amplifier module.
Description
Feature:
Facilitate: All of the board's input and output terminals using a 5.08mm facilitate external connection.
High Efficiency &Application: the digital amp efficiency can be up to 90%.
Safe Protection: The power amplifier module is with short-circuit protection, over voltage protection and over temperature protection.
Quiet Design: audio power amplifier, BTL mode without noisy and interference current sound.
Excellenct Sound: Sound quality is very good by using this audio power amplifier module.
Description:
This product is four-channel amplifier module, the most common of the circuit pattern design concept is also very consistent with the overall effect of the IC.
It can be widely used in home theaters and active speaker and DIY audio.
Kit material is also very particular about Weimaraner dedicated audio capacitors CBB capacitance Matsushita, Japan's ruby filter capacitor.
Specification:
Color: Blue &Red
Material: Compound Material
Input voltage: DC12-14.5 V
Output power: 4 * 41 w
Size: 80 * 50 * 40 mm
Maximum Power Per Channel: 40W
Channels: 4
Packing List:
1 x Amplifier Board
Notes:
1.Due to the difference between different monitors,the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
2.Due to the manual measurement and different measurement methods, please allow 1-3 mm deviation. Thanks!
3. SODIAL 150K-30MHZ HF Upconverter for RTL2383U R Receiver with Aluminum Ca
Feature
Receiving frequency: 150K-30MHZ;working voltage: 5V;
Power: 1.6W
LO: 125MHZ, this is very important, need to set in the software or frequency + 125M, such as 7.05M, is 123.05M (7.05 +125);
Mixing chip: NE602
Description
* SODIAL is a registered trademark. ONLY Authorized ller of SODIAL can ll under SODIAL listings.Our products will enhance your experience to unparalleled inspiration.According to the online radio ta in the circuit design and modification.
As long as ud to receive shortwave broadcast, if a professional antenna can receive HAM communication.
Provide R # software and technical support.
colour:black
Material:ABS
size:5* 2*1cm
Package Contents
1 * Frequency converter
1 * USU data cable
2 * cable
Only the above package content, other products are not included.
Note: Light shooting and different displays may cau the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
4. 1 pcs 1.6W 5V 150K-30MHZ HF Upconverter for RTL2383U SDR Receiver Mixing Chip Adapter Direct Sample with Aluminum Case
Feature
Facilitate: All of the board's input and output terminals using a 5.08mm facilitate external connection.High Efficiency & Application: the digital amp efficiency can be up to 90%.
Safe Protection: The power amplifier module is with short-circuit protection, over voltage protection and over temperature protection.
Quiet Design: audio power amplifier, BTL mode without noisy and interference current sound.
Excellenct Sound: Sound quality is very good by using this audio power amplifier module.
Description
Feature:
Facilitate: All of the board's input and output terminals using a 5.08mm facilitate external connection.
High Efficiency & Application: the digital amp efficiency can be up to 90%.
Safe Protection: The power amplifier module is with short-circuit protection, over voltage protection and over temperature protection.
Quiet Design: audio power amplifier, BTL mode without noisy and interference current sound.
Excellenct Sound: Sound quality is very good by using this audio power amplifier module.
Description:
This product is four-channel amplifier module, the most common of the circuit pattern design concept is also very consistent with the overall effect of the IC.
It can be widely used in home theaters and active speaker and DIY audio.
Kit material is also very particular about Weimaraner dedicated audio capacitors CBB capacitance Matsushita, Japan's ruby filter capacitor.
Specification:
Color: Blue & Red
Material: Compound Material
Input voltage: DC12-14.5 V
Output power: 4 * 41 w
Size: 80 * 50 * 40 mm
Maximum Power Per Channel: 40W
Channels: 4
Packing List:
1 x Amplifier Board
Notes:
1.Due to the difference between different monitors,the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
2.Due to the manual measurement and different measurement methods, please allow 1-3 mm deviation.
5. NooElec NESDR Smart XTR SDR - Premium RTL-SDR w/Extended Tuning Range, Aluminum Enclosure, 0.5PPM TCXO, SMA Input. RTL2832U & E4000-Based Software Defined Radio
Feature
Premium software defined radio NESDR SMArt XTR in a beautiful silver brushed aluminum enclosureA wide variety of improvements on other designs, including ultra-low phase noise 0.5PPM TCXO, 2 RF-suitable voltage regulators, custom heatsink, 2 silicone pads and SMA female connector
Designed from the ground up to reduce USB port occlusion. Run multiple NESDR SMArt series devices side-by-side with any USB-compliant device, including tightly-spaced embedded devices like the Raspberry Pi
SDR frequency capability approximately 65MHz-2300MHz. Frequency range can be extended down to 100kHz or lower with the Ham It Up, also available on Amazon (B009LQT3G6)
Proudly built by NooElec in the USA and Canada! Full 2-year product warranty.
Description
You spoke, we listened! This premium RTL-SDR was designed, developed and fabricated by NooElec in the USA and Canada in order to implement a wide array of feature requests. Compared to R820T-based devices, this E4000-based SDR excels at sensitivity at <500MHz and >1500MHz, and is capable of far higher frequencies, up to approximately 2350MHz. There is a small gap in frequency capability near 1100MHz. As such, we do NOT recommend this device for ADS-B usage. For ADS-B, consider NESDR SMArt, also available on Amazon.
For full product specifications, please visit our website at nooelec.com
Included:
NESDR SMArt XTR SDR in silver brushed aluminum enclosure
SDR Specifications:
RTL2832U Demodulator/USB interface IC
E4000 tuner IC
0.5PPM, ultra-low phase noise TCXO
2 RF-suitable voltage regulators
Shielded primary inductor
Integrated custom heatsink
2 silicone pads
Female SMA antenna input
High-quality silver brushed aluminum enclosure
Frequency capability approximately 65MHz-2300MHz, with small frequency gap near 1100MHz
TCXO Specifications:
Frequency stability: 0.5PPM (max)
Phase noise @1kHz offset: -138dBc/Hz (or better)
Phase noise @10kHz: -150dBc/Hz (or better)
Phase noise @100kHz: -152dBc/Hz (or better)
6. AnalogComponent Upconverter
7. 12-36V Battery Charging Controller Protection Board Low Voltage Cut Off Disconnect Automatic Switch Recovery Protection Module
Feature
According to the online radio talk in the circuit design and modification.As long as used to receive shortwave broadcast, if a professional antenna can receive HAM communication.
Provide SDR software and technical support.
Fully assembled and ready to use.
A separate noise source circuit is included for testing and calibration of various RF devices.
Description
Feature:
According to the online radio talk in the circuit design and modification.
As long as used to receive shortwave broadcast, if a professional antenna can receive HAM communication.
Provide SDR software and technical support.
Fully assembled and ready to use.
A separate noise source circuit is included for testing and calibration of various RF devices.
The case helps to protect PCB from stray EMI, improving sensitivity.
Description:
Vibration: 125MHZ, this is very important, you need to set in the software, or +125M on the frequency, such as 7.05M, that is, 123.05M (7.05+125).
Specification:
Material: Compound Material
Color: Black
Voltage: 5V
Mixer Chip: NE602
Power: 1.6W
Receive frequency: 150K-30MHZ
Packing List:
1 * Up-conversion Receiver ( not including the blue SDR )
1 * USB data cable (1 m)
1 * MCX Male to SMA Female cable
1 * SMA Male to SMA Male cable
Notes:
1.Due to the difference between different monitors,the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
2.Due to the manual measurement and different measurement methods, please allow 1-3 mm deviation.
