When you want to find boat seat swivel mount, you may need to consider between many choices. Finding the best boat seat swivel mount is not an easy task. In this post, we create a very short list about top 10 the best boat seat swivel mount for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 boat seat swivel mount:

Best boat seat swivel mount

Product	Features	Editor's score	Go to site
	attwood Corporation Seat Mount Clamp-On With Swivel		Go to amazon.com
	attwood 17720 Boat Seat Swivel		Go to amazon.com
	Etermal Boat Seat Swivel Base360 Degree Rotating Flat Heavy Duty Seat Swivel Base 6.3" x 6.3" for Bar Stool, Chair, Boat or Van Pilot Seat		Go to amazon.com
	BroCraft Boat Seat Swivel Mount Removable Bracket Seat With Quick Disconnect		Go to amazon.com
	Leader Accessories Marine Boat Seat Swivel		Go to amazon.com
	attwood SP-67749 Swivl-Eze Lock'N-Pin Aluminum 7-Inch x 7-Inch Marine Boat 3/4-Inch Pedestal Base		Go to amazon.com
	SeaLux Universal Heavy Duty 360 degree 7" to 8-3/4" Seat Swivel Base Mount Plate for Bar Stool, Chair, boat or van pilot seat (Large)		Go to amazon.com
	Wise Boat Seat Pedestal, Black, 7-Inch		Go to amazon.com
	SeaLux Universal Heavy Duty 360 degree Seat Swivel Base Mount Plate for Bar Stool, Chair, boat or van pilot seat		Go to amazon.com
	Wise Locking Seat Slide with Seat Mount, Metal, 2 7/8-Inch		Go to amazon.com

Related posts:

1. attwood Corporation Seat Mount Clamp-On With Swivel

Feature

Adjusts from 7-1/2" - 18"
Black powder coated swivel
Fits most seat-bolt patterns
Adjusts from 7.5" to 18"

Description

Attwood Seat Clamp- - Clamp SeatM w/Swivel-Clamp-On Boat Seat Swivel-F E A T U R E S- Adjusts from 7-1/2" - 18" Black powder coated swivel Fits most seat hold patterns

2. attwood 17720 Boat Seat Swivel

Feature

Boat seat swivel
Zero degree tilt
Black powder coated

Description

360 degree ball-bearing seats swivels with 5-1/4 inches universal mounting hole pattern. Zinc-coated for corrosion resistance.

3. Etermal Boat Seat Swivel Base360 Degree Rotating Flat Heavy Duty Seat Swivel Base 6.3" x 6.3" for Bar Stool, Chair, Boat or Van Pilot Seat

Feature

Material: Electrostatic Discharge Coating steel.
6.3" Square top & bottom Swivel plates, 22mm high. Full ball bearings.
Mounting Hole distance 5.1" (Minimum 120x120mm; Maximum 130x130mm), Hole Size: 7*21mm; (Mounting screws not included).
360 Degree Ball bearing swivel mount non-tilting design.
High quality, strong & reliable boat seat & bar stool swivel plate.

Description

Main Features
1.360 Degree rotating boat seat ball bearing attaches to an existing stationary boat chair or floorboard to rotate free with zero tilt.
2. Each boat seat swivel features mount plates on each end of the center bearing measuring 6.3" x 6.3" with 4 mounting holes.
3.Mounting holes (0. 8125"L each) are positioned square from 5" to 5.625" apart.
4.Designed for universal fitting with most single person boat chairs.
5.Boat seat swivel only, Mounting screws is not included.
6.Heavy duty steel with durable paint finish.

Package Included: 1 x Boat Seat Swivel(Mounting screws is not included)

4. BroCraft Boat Seat Swivel Mount Removable Bracket Seat With Quick Disconnect

Go to amazon.com

Feature

Two piece removable boat seat swivel.
Feature a Quick release design allowing you to remove and store the seat.
Seat swivel and base 7" diagonal.
Slides on easily - Corrosion Resistant - UV Protection plastic.
Slides on easily , New Locking device keep better hold

Description

locking bases to aluminium boat bench seats. Engineered for superior holding power in aluminium sheet. Seats can now be securely and safely fitted to aluminium boats.

5. Leader Accessories Marine Boat Seat Swivel

Go to amazon.com

Feature

Black power-coated steel ball bearing swivel
Ball-bearing with Nylon Slide Runners
Swivels 360 degree
6.3"x6.3" square swivel,standard 5" x 5" pattern
Hole pattern fits most boat seats & bar stools

Description

About Products
Black power coated steel ball bearing swivel. Swivels 360 degree.Hole pattern fits most seats.size: 6"x 6"

6. attwood SP-67749 Swivl-Eze Lock'N-Pin Aluminum 7-Inch x 7-Inch Marine Boat 3/4-Inch Pedestal Base

Go to amazon.com

Feature

7" x 7" lock'n-pin 3/4" pin base is aluminum. It works with non-threaded 3/4" pedestal pins and features an acetal bushing for secure fit and durability
Brushed aluminum finish for appealing look and corrosion resistance
Six bolt or screw attachment (hardware not included)
7" by 7" aluminum base
Non-threaded
Nylon bushing
Cleat Coat
3.5" diameter Mounting hole

Description

7" x 7" lock'n-pin 3/4" pin base sp-67739-t is aluminum. It features an Acetal Bushing for secure fit and durability. Easy to install with six screws or bolts through the deck. Add more seating to your pontoon, fishing or cruising boat with Attwood seating products. Attwood develops high value, engineered marine products to make life on the water easier to enjoy. Made to meet the demands of boat builders and distribution partners, our products are extensively tested on-site in our lab to provide worry-free boating under all conditions.

7. SeaLux Universal Heavy Duty 360 degree 7" to 8-3/4" Seat Swivel Base Mount Plate for Bar Stool, Chair, boat or van pilot seat (Large)

Go to amazon.com

Feature

This is a replacement flat swivel zero tilt that goes between the seat and the frame of bar stools.
SeaLux Universal Heavy Duty Seat Base Swivel Mount Overall Dimensions: Plate 7"x 7"; Diagonally Measurement: Plate Corner to Corner: 9-5/8"; Hole Far Reach: 8-3/4" ;Hole Center to Center: 8"; Hole Near Reach: 7" Maximum Capacity: 500 lbs.. Mounting Adjustable from 7" to 8-3/4" Perfect for passenger seating and front bow fishing seats on marine boat.
the 52 ball bearings inside allow for 360 degrees of movement.
opening slotted holes for univeral fit, mounting directly to most standard seats and pedestalsthe
Black EDC (Electrostatic Discharge Coating) finish for corrosion resistance.

Description

SeaLux Universal Heavy Duty Seat Base Swivel Mount Overall Dimensions: Plate 7"x 7"; Diagonally Measurement: Plate Corner to Corner: 9-5/8"; Hole Far Reach: 8-3/4" ;Hole Center to Center: 8"; Hole Near Reach: 7" Maximum Capacity: 500 lbs.

8. Wise Boat Seat Pedestal, Black, 7-Inch

Go to amazon.com

Feature

Strong Steel Construction
Mounts to most boat seats
Pre-Drilled hole pattern to mount seat or hardware
Corrosion and Rust Treated

Description

Black powered coated steel construction. Fits all seat brands or swivels with oblong mounting holes. 3 year warranty.

9. SeaLux Universal Heavy Duty 360 degree Seat Swivel Base Mount Plate for Bar Stool, Chair, boat or van pilot seat

Go to amazon.com

Feature

This is a replacement flat swivel zero tilt that goes between the seat and the frame of bar stools.
Mounting Adjustable from 6" to 7-3/8" Perfect for passenger seating and front bow fishing seats on marine boat.
The 52 ball bearings inside allow for 360 degrees of movement.
The opening slotted holes for univeral fit, mounting directly to most standard seats and pedestalsthe
Black EDC (Electrostatic Discharge Coating) finish for corrosion resistance.

Description

SeaLux Universal Heavy Duty Seat Base Swivel Mount Overall Dimensions: Plate 5-7/8" "x 5-7/8"; Diagonally Measurement: Plate Corner to Corner: 8"; Hole Far Reach: 7-3/8" ;Hole Center to Center: 6-3/4""; Hole Near Reach: 6" Maximum Capacity: 500 lbs. This is a smaller Model, we also has large size available.

10. Wise Locking Seat Slide with Seat Mount, Metal, 2 7/8-Inch

Go to amazon.com

Feature

Strong Aluminum Construction
Mounts to most boat seats and Helm seats
Pre-Drilled hole pattern to mount seat or hardware
Locking mechanism
Swivels 360 Degrees

Description

Wise 8WD374 2-7/8" Diameter Seat Slide with Seat Mount Fits on Most 2 7/8" Diameter Posts, Slide Portion is Constructed with Extruded Aluminum and Allows 5" of Fore and Aft Travel. Easy to Use Adjustment Handle. Seat Mount Constructed of Cast Aluminum with Injection Molded Plastic Handles. Allows Seat to Lock Down or Swivel with Turn of Adjustment Knob. Locking Paddle Handle Features Protruding Lock Mechanism to Lock into Post with Pre-Tapped Adjustment Holes. Fits Wise and Springfield Brand 2 7/8" Posts. BIA Standard Hole Pattern fit Virtually All Seat Brands.

Conclusion

By our suggestions above, we hope that you can found the best boat seat swivel mount for you. Please don't forget to share your experience by comment in this post. Thank you!