Finding the best cb antenna tube mount suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best cb antenna tube mount
1. GS Power Tube Clamp Brackets (Choices 1/1.25/1.75/2 inch). Mount LED Light Bar Radio Whip Antenna Safety Flag on Bar Rack Roll Cage Bumper on Can-Am RZR Rhino Teryx Boat ATV UTV Bike (2 pc)
Feature
Full aluminum alloy construction that will never rustMount hole diameter: 10.5 mm. Can be easily enlarged by drilling. Drilled location will also never rust
Fits 1" Tubes, Bull bars or Roll Cages on Rhino, RZR, Teryx, CAN-AM, Jeep etc
Bracket Sold as a Pair (2 per Purchase)
2. Rugged Ridge 11031.01 Black X-Clamp for 1.25-2" Tube Bumper Roll Bar and Cage Accessory Mount
Feature
Award winning versatile mounting system allows accessories to be mounted on 1.25-2" sport bars, roll cages, tubular bumpers and side stepsPatented Pivotal Fit Technology provides perfect fit with no gaps or gaskets
Mount auxillary off road lights, GoPro or Contour type POV cameras, cb radio antennas, and much more on a tab base that is 2" x 1.67" with a hole that is .5" (12mm)
Rugged die cast aluminum construction finished with durable powder coating includes marine grade 316 stainless steel hardware
Includes all the tools needed and thorough installation guide for a quick and easy install
Description
The new X-Clamp system from Rugged Ridge is an innovative way to mount lights, cameras, antennas and more on any 1.25 to 2-inch diameter tubing. This X-Clamp is constructed from high-quality die-cast aluminum and is available in a black powder coated finish. Simple to install regardless of the application, each clamp can be installed by rotating it to fit the tube diameter, pivoting the mounting bracket to the desired position, and adding the preferred accessory.3. Rugged Ridge 11503.88 CB Antenna Mounting Bracket for All Tube Bumpers
Feature
Black Powder CoatedUse on any 3 inch tube
Mount any size antenna
Rubber insert to protect bumper finish
Limited 5 Year Warranty
Description
CB antenna mounting bracket, for use on 3 inch tubes4. Rugged Ridge 11030.01 Black X-Clamp for 2.25-3" Tube Bumper Roll Bar and Cage Accessory Mount
Feature
Award winning versatile mounting system allows accessories to be mounted on 2.25-3" sport bars, roll cages, tubular bumpers and side stepsPatented Pivotal Fit Technology provides perfect fit with no gaps or gaskets
Mount auxillary off road lights, GoPro or Contour type POV cameras, cb radio antennas, and much more on a tab base that is 2" x 1.67" with a hole that is .5" (12mm)
Rugged die cast aluminum construction finished with durable powder coating includes marine grade 316 stainless steel hardware
Includes all the tools needed and thorough installation guide for a quick and easy install
Description
Looking to add some versatility to your ride? The patent pending Rugged Ridge X-Clamp Mounting System features three stunning finishes of black, textured black and sleek silver and offers unparalleled mounting versatility for your convenience. Designed to be extremely adaptable, the new X-Clamp system is an innovative way to mount lights, cameras, antennas and more on any 2.25-3 inch diameter tubing, regardless of the vehicle they are being mounted to. Simple to install regardless of the application, each clamp uses state-of-the-art Pivotal Fit Technology and can be installed by rotating it to fit the tube diameter, pivoting the mounting bracket to the desired position, and adding the preferred accessory. No other clamp on the market will give you a perfect fit on such a range of tube sizes!5. Hy-Gain ATB-75 Universal Tilt Vert. Base Mount
Feature
Pre-punched hole makes it easy to mount many different type of verticals.Fits Hygain's AV-18VS, AV-14VS, AV-18AVQII, AV-620, AV-640, AV-6160, MFJ-1796, MFJ-1798, MFJ-2990 and others with tube bases or mast pipes up to 2 " OD.
Mount one side of the tilt base to the mast and the other to the antenna base.
No climbing a ladder - raise your antenna up/down easily before severe weather by yourself - just walk it up or walk it down.
Ground radial holes also provided. " thick aluminum. Includes (2) 2 " U-bolts, mast saddles and stainless steel nuts/bolts.
Description
A unique design allows this tilt base to fit most vertical antennas with or without a base bracket. Pre-punched hole makes it easy to mount many different type of verticals. Fits Hygain's AV-18VS, AV-14VS, AV-18AVQII, AV-620, AV-640, AV-6160, MFJ-1796, MFJ-1798, MFJ-2990 and others with tube bases or mast pipes up to 2 " OD. Mount one side of the tilt base to the mast and the other to the antenna base. No climbing a ladder - raise your antenna up/down easily before severe weather by yourself - just walk it up or walk it down. Ground radial holes also provided. " thick aluminum. Includes (2) 2 " U-bolts, mast saddles and stainless steel nuts/bolts.6. RCS-4 RCS4 Original Ameritron 1-30 MHz 4 Position Antenna Switch
Feature
The weatherproof switching box uses three heavy-duty 10 ampere contact relays on a G-10 fiberglass circuit board. Quality components are used throughout the entire unit to ensure maximum life for the sometimes difficult-to-reach switching box.RCS-4 antenna switches operate from any 120 V AC power source that allows for safe operation with 14 V control voltage. Frequencies from 1.8 to through 30 MHz are covered by these convenient station accessories that handle 1,500 watts continuous. RCS-4L switches ("L" for lightning) incorporate a gas-tube surge suppressor for protection from lightning induced voltages.
The RCS-4 operates from 120 VAC, while the RCS-4X operates at 220/240 VAC. It allows safe operation with 14 volts control voltage. Frequencies from 1.5 to through 100 MHz are covered by this excellent station accessory. It also handles over 2500 watts.
Description
Ameritron RCS-4 Remote Coax Switches are remote-controlled coax switches that select one of four outputs by supplying all control voltages through the coax. The elimination of control cables gives you a fast, neat, and inexpensive installation with only one coaxial line for four antennas. Included are two units, the switching box that can be tower, mast, or wall mounted, and the control console that is located at your operating station. The indoor consoles have bright LED antenna selector indicators. A steel enclosure provides 100 percent shielding to prevent RFI and TVI. Switching time is 50ms. SO-239 connectors provide reliable connections.7. MFJ-270N Lighting Protector, N-Type, 400W PEP
Feature
Safeguards radio equipment from damaging static electricity and lightning induced surge arrest traveling on coax.Ultra-fast gas discharge tube safely shunts up to 5000 amps of peak impulse current harmlessly to an independent ground.
50 Ohm Impedance
Handles up to 400 Watts PEP
N-Type connectors
Description
The MFJ-270N lightning surge protector safeguards your ham radio equipment from damaging static electricity and lightning induced surge arrest traveling on coax feedlines. Countless hams have watched their precious radio equipment destroyed by lightning induced surges traveling on their coax feedlines. Dont be next! MFJs ultra-fast gas discharge tube safely shunts up to 5000 amps of peak impulse current harmlessly to an independent ground. The MFJ-270N presents a constant 50 Ohm impedance to your transmission line. It has an SWR less than 1.1:1 and an insertion loss of less than 0.1dB. It can be used up to 1000MHz. The MFJ-270N handles up to 400 Watts PEP. Has N-type connectors and works with all types of coax fed antennas. The MFJ-270N is made of heavy duty steel with quality connectors and components.8. MFJ-906 MFJ906 Original MFJ Enterprises Manual tuner + SWR, 200W, 50MHz
Feature
MFJ-906 ~Manual tuner + SWR, 200W, 50MHzDescription
6 Meter Antenna Tuner with WattmeterThe MFJ-906 6 Meter antenna tuner for the Magic Band gives you low SWR with practically any coax-fed antenna: mobile whips, dipoles, verticals, vees, random wires, beams.
With low SWR, your rig will be more efficient; you'll get more power out of your 6 meter transceiver and into your antenna for more DX, it will run cooler and last longer, and your expensive transceiver will be protected from overheating due to high SWR.
A lighted Cross-Needle SWR/Wattmeter shows SWR, forward and reflected power simultaneously in 300/60 forward and 30/6 reflected Watt ranges and has an ON/OFF lamp switch. With a built-in bypass switch, you can bypass your tuner and connect your transceiver directly to your antenna.
The MFJ-906 handles 100 Watts FM and 200 Watts SSB PEP. It works with all solid state and tube rigs and is perfect for home and mobile use. The MFJ-906 measures 8" x 2 " x 3". The meter lamp uses 12 Vdc.
9. MFJ-407E Deluxe Electronic Keyer With Memory
Feature
Everything you need to send great CW from this MFJ Cutris Keyer TMEasy access front panel controls, all keyer modes, dot-dash memories, jam-proof spacing, weight control, sidetone, built-in speaker and more
Speed, weight, tone and volume controls, and tune, semi-auto and on/off switches are on the front panel
Use 9 volt battery or 110 VAC with MFJ-1312D.
Attractive black cabinet measures 5 3/4 x 1 3/4 x 4 3/4 inches.
Description
Everything you need to send great CW from this MFJ Cutris Keyer TM -- easy access front panel controls, all keyer modes, dot-dash memories, jam-proof spacing, weight control, sidetone, built-in speaker and more. Speed, weight, tone and volume controls, and tune, semi-auto and on/off switches are on the front panel. A dual paddle key such as the MFJ-564, lets you use the iambic mode. In this mode, you can insert a dot before a dash finishes or insert a dash before a dot finishes. Also, squeezing both paddles generates alternating dots and dashes. This lets you send characters such as C, K, and R with a single squeeze. It turns an inexperienced fist into a professional. You can use the automatic mode with a single or dual paddle. You automatically generate dots and dashes by pressing the paddle. You can switch into a semi-automatic "bug" mode to generate dots automatically and dashes manually. Or you can use a "straight key" and manually generate your own dots and dashes. You get dot-dash memory, self-completing dots and dashes, jam-proof spacing and instant start keying. Select Type A or Type B keying to match your sending style. Weight control lets you adjust your dot-dash space ratio to make your signal sound distinctive to bust through pile-ups. It also lets you compensate for the turn-on delay of your transmitter. Has tune switch for tuning your transmitter or antenna tuner. RF proof. Built-in speaker for sidetone. Keys solid state and tube transmitters. Use 9 volt battery or 110 VAC with MFJ-1312D. Attractive black cabinet measures 5 3/4 x 1 3/4 x 4 3/4 inches.10. Hustler IC-56 Stainless Steel 102" (8.5 feet) CB Band Antenna Whip, 27 MHz Frequency, Resists Bending and Kinking, Stainless Steel 17-7ph Whip, Dissipation Ball Tip Reduces Unwanted Static
Feature
102" LONG WITH 3/8" X 24 THREAD17-7 STAINLESS STEEL
NO SET SCREWS ON MOUNTING STUD
FREQUENCY RANGE IS 26-30Mhz
500 WATT POWER RATING
