Finding the best loaded jl box suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best loaded jl box
1. JL Audio CP212-W0V3 Dual 12" 12W0v3 Ported Subwoofer Enclosure Box
Feature
CP212-W0V3 - JL Audio 12" 12W0V3-4 Loaded Ported Enclosure with Gray Carpet FinishPower Handling: Peak: 600 watts | RMS: 300 watts
Mineral-filled, polypropylene cone woofer for excellent durability
Large roll surround for generous amounts of excursion
Enclosure Dimensions: 15-3/4"TD x 20-5/16"BD x 31-3/8"W x 15-3/16"H
Description
These potent slot-ported MDF-enclosed subwoofer systems fit a wide variety of vehicles and feature JL Audio's new 12" W0v3 subwoofer drivers. Designed for forward, read or down-firing installation. Loaded, wired, ready to install. Finished in dark gray carpet, five-way binding post connectors. Embroidered JL Audio logo above woofer(s), embroidered "Slot-Ported BassWedge" logo on port mouth. 2 ohm final impedance2. Pioneer TS-SWX2502 10 inch Shallow-Mount Pre-Loaded Enclosure
Feature
Music Power (Nominal): 1,200 W (400 W) Frequency Response: 20 Hz to 125 Hz, Sensitivity (1 W/1 m): 93 dB, Impedance: Single 4 Tight bass from a shallow compact design, Reinforced MICA injection-molded resin preloaded subwoofer coneDescription
Pioneer TS-SWX2502 10 inch Shallow-Mount Pre-Loaded Enclosure. Music Power (Nominal): 1,200 W (300 W) Frequency Response: 20 Hz to 200 Hz.Avoid installing in areas that are unstable or subject to frequent vibration.3. Rockford Fosgate P300-12 Punch 300 Watt Powered Loaded 12-Inch Subwoofer Enclosure
Feature
Constructed with 5/8-Inch MDF12 AWG input terminals
Class D amplifier (300 watts RMS).Frequency Response 35Hz to 150Hz
Remote bass-level control included. Crossover Controls : Variable 50Hz to 200Hz at 12dB/Octave Butterworth
Sealed enclosure, for tight, accurate bass. Dimensions: 15 H x 19.8 W x D1 11 - D2 7 (inches)
Frequency Response is 35Hz to 150Hz
Description
The P300-12 powered subwoofer is an "all-in-one" solution when adding bass to a factory system or just to save space. This model features a 12-Inch subwoofer in a sealed enclosure powered by an internal 300 watt amplifier.4. CLS110RG-W7AE - JL Audio 10" Single 10W7AE Loaded Subwoofer Enclosure
Feature
10" Single 3 Ohm W7 Series Subwoofer10th Anniversary Edition
Power Handling: Peak: 1500 watts /RMS: 750 watts
High grade black carpet finish
Dimensions: 11-1/2"TD x 16-5/8"BD x 17-3/4"W x 14-5/8"H
Description
CLS110RG-W7AE JL Audio 10" Single 10W7AE Loaded Subwoofer Enclosure5. Jl Audio CP110-W0v3
Feature
CP110-W0v3 - Jl Audio 10" Single 10W0v3-4 Loaded Ported Enclosure with Gray Carpet FinishMineral-filled, polypropylene cone woofer for excellent durability
Large roll surround for generous amounts of excursion
Elevated frame cooling brings air directly to the voice coil
Mounting Depth: 4-15/16"
Description
JL AUDIO CP110-W0V3 10" SUB 10W0V3-4 PORTED ENCLOSURE SUBWOOFER SPEAKER BASS BOX6. HO112-W6V3 - JL Audio Single 12" 600W RMS Loaded Subwoofer Enclosure
Feature
12" subwoofer in ported enclosure12" 12W6v3 speaker with dual 4-ohm voice coils
5/8" medium density fiberboard sealed enclosure with carpet covering
2-ohm total impedance
Dimensions: 14-3/8"W x 16-1/4" H x 23-7/8"D
Description
JL AUDIO HO112-W6V3 12" SUB LOADED SUBWOOFER ENCLOSURE BASS SPEAKER & BOX NEW7. JL Audio H.O. Wedge Mobile Box Subwoofer
Feature
Slot Ported Subwoofer Enclosure Loaded with Single 12" W3V3 Subwoofers at 4-Ohm Final ImpedanceDescription
Slot Ported Subwoofer Enclosure Loaded with Single 12" W3V3 Subwoofers at 4-Ohm Final Impedance8. JL Audio ACP208LG-W3v3 500W MicroSub+ Amplified Subwoofer Ported-Enclosure System with Dual 8" 8W3v3 Subwoofer
Feature
Active Dual 8W3v3-0.40 Subwoofer Drivers | Power Output: RMS: 500 watts | Built-in Proprietary Class-D amplifier | High quality Black vehicle carpet wrap | Mineral-filled polypropylene cone wooferRubber surround | DMA optimized motor system | Elevated frame cooling | Vented reinforcement collar | Floating Cone Attach Method (FCAM)
Insert molded suspension, coil, and terminal-sub assembly | Surround stress relief design | Black Steel Mesh Grille Included | Slot-ported, Low-profile Enclosure | Extensive interior bracing
8 gauge OFC power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this enclosure. | Dimensions: 36.625" W x 11.125" H x 5.125" D
Built-in amplifier 500 W @ 0.20 | Input Voltage Range @ RCA Inputs: 70 mV - 1.40 V RMS | Input Voltage Range @ High-Level Inputs: 280 mV - 5.4 V RMS | Fuse Rating: 30 A (ATO or ATC) | Filter Modes: Low-Pass only | Filter Slope (dB/Octave): 12 dB | Filter Frequency Range: 50 - 200 Hz | Selectable Output Polarity Switch | Optional Remote Subwoofer Level Control: RBC-1
Description
JL AUDIO ACP208LG-W3V3 8" LOADED SUBWOOFERS SPEAKERS & ENCLOSURE BOX & AMPLIFIER9. JL Audio ACP112LG-TW1 400W MicroSub+ Amplified Subwoofer Ported-Enclosure System with Single 12" 12TW1 Subwoofer
Feature
Single 12" Vented Subwoofer Enclosure with Built-In Amplifier | Power Output: RMS: 400 Watts Total | Preloaded with single 12" TW1 Series Subwoofer Driver - 12TW1-0.25 | Built-in DCDTM Class D amplifier | Vented enclosure with carpet finishSubwoofer Features: Injection molded, mica-filled polypropylene cone | Rubber surround | Cast alloy frame | Long linear excursion capability (0.40 in / 10 mm, one-way) | DMA-optimized motor design | Patented "concentric tube" architecture | Patented "floating cone attach method" technology | Steel mesh grille included
Amplifier Features: Input Voltage Range @ RCA Inputs: 70 mV - 1.40 V RMS | Input Voltage Range @ High-Level Inputs: 280 mV - 5.4 V RMS | 12 dB per octave filter slope | Low-pass filter: 50 - 200 Hz
Selectable output polarity (i.e. Phase): 0 / 180 | Selectable turn-on modes: Sig / DC / REM | Automatic turn-on (via signal sensing or DC offset sensing) | High level speaker input, w/ molex connection harness | Optional bass remote available, sold separately: JL Audio RBC-1 | Fuse Rating: 30A x 1
Enclosure Features: V-Groove MDF Construction | Flared port entry and exit | Automotive-grade vehicle carpet | CNC-Cut High-Grade MDF | Silver "JL AUDIO Built In USA" embroidery on front baffle | Steel mesh grille mounted with driver | Enclosure Dimensions: 9.25" D x 23.75" W x 15.75" H
Description
JL AUDIO ACP112LG-TW1 12" 12TW1 400W SUBWOOFER ENCLOSURE SPEAKER BOX AMPLIFIER10. Rockford Fosgate P3D4-12 Punch P3 DVC 4-Ohm 12-Inch 600-Watt RMS 1200-Watt Peak Subwoofer
Feature
Features 2.50 Inch Copper Clad Aluminum Voice CoilVAST Vertical Attached Surround For Increased Cone Area; Voice Coil Type : Dual Voice Coil
Features Flex Fit Basket Design. Dual linear spider with embedded 16 AWG tinsel leads
Thermal Anodized Aluminum Cone
600 Watts RMS 1200 Watts Peak Power Rating
12-inch, dual 4-ohm subwoofer with 1200 watts maximum power handling (600 watts RMS)
Anodized aluminum cone and dustcap with Rockford "VAST" (Vertical Attach Surround Technique) surround
High-temp voice coils with spun-laced Nomex re-inforcement collar
Flex fit basket for slight adjustments when mounted;Cutout Diameter: 11.25 inches. (285 mm) ; Mounting Depth: 6.66 inches. (169.3 mm)
One-year limited manufacturer's warranty