If you looking for supply valve then you are right place. We are searching for the best supply valve on the market and analyze these products to provide you the best choice.

Best supply valve

Product	Features	Editor's score	Go to site
	(4-Pack) BrassCraft G2CR19L1X 1/2-in Nominal Comp x 3/8-in OD Outlet Chrome Plated Brass 1/4-Turn Angle Stop Valve Less Outlet Sleeve/Nut (4-Pack)		Go to amazon.com
	1/2-in Nominal Comp (5/8" OD Comp) x 3/8-in OD Comp 1/4-Turn Chrome Brass Angle Stop Valve Water Shut Off Ball Valve Lead Free (10-Packs)		Go to amazon.com
	[10-Pack] PROCURU Angle Stop Valve 1/2" Nominal (5/8" OD) Inlet x 3/8" OD Comp Outlet, 1/4-Turn Lead Free (10-Pack)		Go to amazon.com
	BrassCraft G2CR19X C1 1/2 in. NOM Comp Inlet x 3/8 in. OD Compression Outlet Chrome Plated Brass 1/4 Turn Angle Valve		Go to amazon.com
	Brasscraft Psb52X Multi Turn Angle Water Shut Off Valve, Chrome Plated		Go to amazon.com
	Royal H&H Modern Angle Stop Valve Shut Off Quarter Turn Water Bathroom Sink Toilet Kitchen Shower Plumbing Commercial 1/2 inch Male IPS G1/2 Round Handle Solid Brass Polished Chrome		Go to amazon.com
	Plumb Craft 7832700LF 1/2-Inch FIP by 3/8-Inch Low Lead Quarter Turn Angle Valve		Go to amazon.com
	Pushlock UPASC1238 1/4 Turn Angle Stop for Push-Fit Valve, 1/2 Inch Push x 3/8 Inch Compression, Chrome Finish w/ Metal Handle and Slim Fitting Design, Lead Free Construction & 1/4 Turn On/Off Handle		Go to amazon.com
	Eastman 10738LF Angle Stop Valve		Go to amazon.com
	LASCO 06-9201 Angle Stop Quarter Turn Ball Valves, 1/2-Inch Iron Pipe Inlet X 3/8-Inch Compression Outlet, Chrome		Go to amazon.com

Related posts:

1. (4-Pack) BrassCraft G2CR19L1X 1/2-in Nominal Comp x 3/8-in OD Outlet Chrome Plated Brass 1/4-Turn Angle Stop Valve Less Outlet Sleeve/Nut (4-Pack)

Feature

Angle Stop Valve: Shut-off Valve; 1-Piece Body Construction; 1/4-Turn ON/OFF
Inlet: 1/2" Copper Pipe (1/2" Nominal Compression); Outlet: 3/8" OD Compression (NO Nut/Sleeve)
Lead Free: Compliant with Low-Lead Legislation Act S3874 & AB1953
Exactly Same As G2CR19XC1 Less Nut/Sleeve on Outlet
Professional Value Buy: Pack of 4

Description

This genuine BrassCraft angle stop valve has 1/2-inch nominal (5/8" OD) inlet x 3/8-inch OD outlet and is chrome-plated lead free brass. For use in potable water distribution systems. Not intended for recirculating water systems that produce continuous temperatures above 115-degree F. Each pack includes 4 valves.

2. 1/2-in Nominal Comp (5/8" OD Comp) x 3/8-in OD Comp 1/4-Turn Chrome Brass Angle Stop Valve Water Shut Off Ball Valve Lead Free (10-Packs)

Feature

Pack of 10 Pcs Angle Stop Valve
Shut-Off Chrome Brass Angle Stop Valve for Faucets and Toilets
Lead Free Compliant with Low-Lead Legislation Act S3874 & AB1953
1/4-turn valve operation means only a quarter turn of the handle
Inlet: 5/8" OD (1/2" Nominal, Fits 1/2" Copper Pipe), Outlet: 3/8" OD Compression

Description

Plumbing Lot 1/4 Turn Brass Angle Stop Valve 3/8" OD COMP x 5/8" OD COMP 5/8" OD Compression For 1/2" Copper Tube, Lead-Free ,cUPC Approved,Solid Brass Ball, Easy-turn Metal Handle ,Soild Brass Body with Brass stem ,Maintenance free 1/2 in. Nominal Compression Inlet x 3/8 in. O.D. Compression Outlet 1/4-Turn Angle Valve controls water flow to household plumbing fixtures - faucets, toilets, dishwashers, icemakers, washing machines, etc. The angle valve is most often used where the water pipe enters the room from the wall. With a 90 Degree turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home. Compatible with copper or PEX (PEX installations require a stainless steel tube insert) Smooth, quarter-turn operation, on/off flow control with a 90 turn of the handle 1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use Easy-to-remove handle protects against accidental operation during rough-ins 1-piece body construction for strength, durability and long-lasting performance Chrome-plated brass Temperature rating: 40 to 140 Pressure rating: 125 psi maximum No-lead certifiedIAPMO and CSA listed to ASME A112.18.1/CSAB125.1

3. [10-Pack] PROCURU Angle Stop Valve 1/2" Nominal (5/8" OD) Inlet x 3/8" OD Comp Outlet, 1/4-Turn Lead Free (10-Pack)

Feature

Shut-Off Brass Angle Stop Valve for Faucets and Toilets
1/4-Turn ON/OFF Operation
Lead Free Compliant with Low-Lead Legislation Act S3874 & AB1953
Inlet: 1/2" Nominal (5/8" OD, Fits 1/2" Copper Pipe), Outlet: 3/8" OD Compression
Each pack contains 10 valves

Description

PROCURU is the brand of choice for plumbing professionals. Manufactured at the ISO approved facilities, each valve is rigorously tested and engineered for maximum durability and performance. This valve is made of heavy duty, durable, rust-resistant lead-free brass. Compliant to Low-Lead Laws including AB1953 and Legislation Act S3874. This item contains pack of 10 valves.

4. BrassCraft G2CR19X C1 1/2 in. NOM Comp Inlet x 3/8 in. OD Compression Outlet Chrome Plated Brass 1/4 Turn Angle Valve

Feature

Compliant with Low-Lead Legislation Act S3874
1-piece body construction for strength and durability
1/4-turn valve operation means only a quarter turn of the handle
For use with water temperatures of 40-140 Degrees Fahrenheit
Chrome-plated brass for durable high quality appearance
Made in US

Description

1/2-in NOM compression x 3/8-in OD compression, chrome plated, window tray. For use in potable water distribution systems. Not intended for recirculating water systems that produce continuous use temperatures above 115-Degree F.

5. Brasscraft Psb52X Multi Turn Angle Water Shut Off Valve, Chrome Plated

Feature

Machined, one-piece body construction for strength, durability and long-lasting performance
Removable handle helps protect against accidental operation during rough-ins
Multi-turn operation means water flow control with only a few turns of the handle
Temperature rating: 40 Degree to 140 Degree F. Pressure rating: 125 psi maximum
IAPMO and CSA listed to ASME A112.18.1/CSA B125.1

Description

Brass Craft 1/2 In. Nom Compression Inlet x 3/8 In. OD Compression Outlet Multi-Turn Angle Valve controls water flow to household plumbing fixtures - faucets, toilets, dishwashers, icemakers, washing machines, etc. The angle valve is most often used where the water pipe enters the room from the wall. With a few turns of the valve handle, you are able to stop or start the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home. Compatible with Copper and PEX water distribution systems. PEX installations require an insert for proper installation.

6. Royal H&H Modern Angle Stop Valve Shut Off Quarter Turn Water Bathroom Sink Toilet Kitchen Shower Plumbing Commercial 1/2 inch Male IPS G1/2 Round Handle Solid Brass Polished Chrome

Feature

SOLID BRASS: Stop valve is made of quality all solid metal and finished in electroplated polished chrome
DURABLE: Fast 1/2 brass cartridge: Ensures longevity and trouble free operation
G1/2" Inlet, G1/2" outlet (1/2" x 1/2")
QUARTER TURN: Quarter turn water shut off valve means easier shutoff open close and only need to turn 1/4 way
MODERN: Contemporary chrome finish this designer angle valve stop puts a premium touch to those old ugly pipe fittings.

Description

This designer quarter turn water angle shut off valve will put a modern touch to your home or commercial project. Royal Home & Hardware's products will instantly put a modern touch to your home and plumbing system whether its under the sink; for faucets; in the lavatory, bath, shower or kitchen.

Have an attention to detail? Just upgraded your house with the modern accessories and hardware, but still using those old industrial angle valves? Royal Home & Hardware's modern angle stop valves will instantly put a modern touch to your home and plumbing system whether its under the sink; for faucets; in the lavatory, toilet, bath or kitchen.

Royal Home & Hardware

Modern quarter turn angle stop valve is made from solid brass body to ensure a lifetime of durability. 1/2" Mips x 1/2" Mips non compression outlet controls water flow to household plumbing fixtures. The angle valve is most often used where the water pipe enters the room from the floor. With a single turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without turning off water to the entire home. Modern appearance and high quality solid brass construction.

Not for potable water

7. Plumb Craft 7832700LF 1/2-Inch FIP by 3/8-Inch Low Lead Quarter Turn Angle Valve

Feature

Angle valve
Low lead
Quick 1/4 turn shutoff
1/2-Inch FIP x 3/8-Inch outside diameter compression
Chrome finish

Description

7832700LF Features: -Quick 0.25 turn shut-off. -Chrome finish. Application: -Bathroom faucet. Product Type: -Angle valve. Finish: -Chrome. Dimensions: -Compression outside: 0.375'' W. -0.5'' FIP.

8. Pushlock UPASC1238 1/4 Turn Angle Stop for Push-Fit Valve, 1/2 Inch Push x 3/8 Inch Compression, Chrome Finish w/ Metal Handle and Slim Fitting Design, Lead Free Construction & 1/4 Turn On/Off Handle

Feature

Lead Free Removable Brass Fittings in Size 1/2 Inch push x 3/8 Inch Comp and 1/4 Turn on/off
Certified for Potable Water and Hydronic Applications
Connects PEX, CPVC and Copper Pipe in Any Combination
Made with Lead Free DZR Forged Brass and Pre-Lubricated for Quick Installation
No Tools, No Heat, No Glue, No Flux and No Solder Required; EPDM O-Ring for Leak Free Seals

Description

Pushlock 1/2 inch Push x 3/8 inch Compression end valve (push fit 1/4 turn angle stop) are easily installed and yet easy to disconnect and reuse. The angle valve is most often used where the water pipe enters the room from the floor. It features easy, Quick push-fit connection of nominal hard copper tube size (CTS), CPVC, or PEX with single lever heavy duty rust resistant handle with vinyl grip. This valves are certified for potable water and hydronic applications. When using these valves there is no need to buy expensive tools, torches, solder, flux or glue and primer. These valves can easily be removed by using a demount clip or disconnect tong. Approved for use underground and behind walls without the need of access panels. Made with Lead Free DZR Forged Brass. They are ideal for service and repair - even on wet lines. Pre-Lubricated for quick installation and No Tools, No Heat, No Glue, No Flux and No Solder Required, EPDM O-Ring for leak free seals.

SPECIFICATIONS & APPROVALS:

• Certified to 200 PSI WOG and 200F
• Certified by UPC / IAPMO, to meet Lead-Free Potable Water Laws
• ANSI/NSF-14/G Compliant & AWWA C800 Compliant
• Meets ASME B1.20.1, ASSE 1061
• Manufactured in an ISO Accredited Facility

9. Eastman 10738LF Angle Stop Valve

Feature

5/8" Comp (1/2" Nom) x 3/8" Comp
Professional series
Forged brass body
Teflon seats resist corrosion and provides a watertight seal
Brass ball mechanism for easy operation

Description

Eastman's 5/8" Comp (1/2" Nom) x 3/8" Comp Angle Stop Valve controls water flow to household plumbing fixtures. With 1/4 turn, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without turning off water to the entire home. The Teflon seats resist corrosion and provides a watertight seal.

10. LASCO 06-9201 Angle Stop Quarter Turn Ball Valves, 1/2-Inch Iron Pipe Inlet X 3/8-Inch Compression Outlet, Chrome

Feature

The product is 1/2" Female Pipe Thread Inlet x 3/8" Compression Outlet
Easy and simple use kit
The product is manufactured in China
Inlet 1/2-Inch female pipe X 3/8-Inch OD compression
Quarter turn angle stop valve
Chrome plated brass body
Lead free product. meets California AB-1953. Vermont. and new federal standards for low lead applications
Uniform Plumbing Code (UPC) certified and approved - Industry standard ensuring product quality and safety

Description

LASCO 06-9201 Chrome Plated Brass Quarter Turn Angle Stop Valve 1/2-Inch Female Iron Pipe X 3/8-Inch OD Compression. Inlet 1/2-Inch female pipe X 3/8-Inch OD compression. Quarter turn angle stop valve. Chrome plated brass body. Lead free product. meets California AB-1953. Vermont. and new federal standards for low lead applications. Uniform Plumbing Code (UPC) certified and approved - Industry standard ensuring product quality and safety.

Conclusion

By our suggestions above, we hope that you can found the best supply valve for you. Please don't forget to share your experience by comment in this post. Thank you!